/* * Copyright (C) 2006 The Android Open Source Project * * Licensed under the Apache License, Version 2.0 (the "License"); * you may not use this file except in compliance with the License. * You may obtain a copy of the License at * * http://www.apache.org/licenses/LICENSE-2.0 * * Unless required by applicable law or agreed to in writing, software * distributed under the License is distributed on an "AS IS" BASIS, * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. * See the License for the specific language governing permissions and * limitations under the License. */ package com.android.internal.telephony; import com.android.internal.telephony.cdma.CdmaSmsBroadcastConfigInfo; import com.android.internal.telephony.dataconnection.DataProfile; import com.android.internal.telephony.gsm.SmsBroadcastConfigInfo; import com.android.internal.telephony.RadioCapability; import com.android.internal.telephony.uicc.IccCardStatus; import android.os.Message; import android.os.Handler; /** * {@hide} */ public interface CommandsInterface { enum RadioState { RADIO_OFF, /* Radio explicitly powered off (eg CFUN=0) */ RADIO_UNAVAILABLE, /* Radio unavailable (eg, resetting or not booted) */ RADIO_ON; /* Radio is on */ public boolean isOn() /* and available...*/ { return this == RADIO_ON; } public boolean isAvailable() { return this != RADIO_UNAVAILABLE; } } //***** Constants // Used as parameter to dial() and setCLIR() below static final int CLIR_DEFAULT = 0; // "use subscription default value" static final int CLIR_INVOCATION = 1; // (restrict CLI presentation) static final int CLIR_SUPPRESSION = 2; // (allow CLI presentation) // Used as parameters for call forward methods below static final int CF_ACTION_DISABLE = 0; static final int CF_ACTION_ENABLE = 1; // static final int CF_ACTION_UNUSED = 2; static final int CF_ACTION_REGISTRATION = 3; static final int CF_ACTION_ERASURE = 4; static final int CF_REASON_UNCONDITIONAL = 0; static final int CF_REASON_BUSY = 1; static final int CF_REASON_NO_REPLY = 2; static final int CF_REASON_NOT_REACHABLE = 3; static final int CF_REASON_ALL = 4; static final int CF_REASON_ALL_CONDITIONAL = 5; // Used for call barring methods below static final String CB_FACILITY_BAOC = "AO"; static final String CB_FACILITY_BAOIC = "OI"; static final String CB_FACILITY_BAOICxH = "OX"; static final String CB_FACILITY_BAIC = "AI"; static final String CB_FACILITY_BAICr = "IR"; static final String CB_FACILITY_BA_ALL = "AB"; static final String CB_FACILITY_BA_MO = "AG"; static final String CB_FACILITY_BA_MT = "AC"; static final String CB_FACILITY_BA_SIM = "SC"; static final String CB_FACILITY_BA_FD = "FD"; // Used for various supp services apis // See 27.007 +CCFC or +CLCK static final int SERVICE_CLASS_NONE = 0; // no user input static final int SERVICE_CLASS_VOICE = (1 << 0); static final int SERVICE_CLASS_DATA = (1 << 1); //synonym for 16+32+64+128 static final int SERVICE_CLASS_FAX = (1 << 2); static final int SERVICE_CLASS_SMS = (1 << 3); static final int SERVICE_CLASS_DATA_SYNC = (1 << 4); static final int SERVICE_CLASS_DATA_ASYNC = (1 << 5); static final int SERVICE_CLASS_PACKET = (1 << 6); static final int SERVICE_CLASS_PAD = (1 << 7); static final int SERVICE_CLASS_MAX = (1 << 7); // Max SERVICE_CLASS value // Numeric representation of string values returned // by messages sent to setOnUSSD handler static final int USSD_MODE_NOTIFY = 0; static final int USSD_MODE_REQUEST = 1; static final int USSD_MODE_NW_RELEASE = 2; static final int USSD_MODE_LOCAL_CLIENT = 3; static final int USSD_MODE_NOT_SUPPORTED = 4; static final int USSD_MODE_NW_TIMEOUT = 5; // GSM SMS fail cause for acknowledgeLastIncomingSMS. From TS 23.040, 9.2.3.22. static final int GSM_SMS_FAIL_CAUSE_MEMORY_CAPACITY_EXCEEDED = 0xD3; static final int GSM_SMS_FAIL_CAUSE_USIM_APP_TOOLKIT_BUSY = 0xD4; static final int GSM_SMS_FAIL_CAUSE_USIM_DATA_DOWNLOAD_ERROR = 0xD5; static final int GSM_SMS_FAIL_CAUSE_UNSPECIFIED_ERROR = 0xFF; // CDMA SMS fail cause for acknowledgeLastIncomingCdmaSms. From TS N.S0005, 6.5.2.125. static final int CDMA_SMS_FAIL_CAUSE_INVALID_TELESERVICE_ID = 4; static final int CDMA_SMS_FAIL_CAUSE_RESOURCE_SHORTAGE = 35; static final int CDMA_SMS_FAIL_CAUSE_OTHER_TERMINAL_PROBLEM = 39; static final int CDMA_SMS_FAIL_CAUSE_ENCODING_PROBLEM = 96; //***** Methods RadioState getRadioState(); /** * response.obj.result is an int[2] * * response.obj.result[0] is IMS registration state * 0 - Not registered * 1 - Registered * response.obj.result[1] is of type RILConstants.GSM_PHONE or * RILConstants.CDMA_PHONE */ void getImsRegistrationState(Message result); /** * Fires on any RadioState transition * Always fires immediately as well * * do not attempt to calculate transitions by storing getRadioState() values * on previous invocations of this notification. Instead, use the other * registration methods */ void registerForRadioStateChanged(Handler h, int what, Object obj); void unregisterForRadioStateChanged(Handler h); void registerForVoiceRadioTechChanged(Handler h, int what, Object obj); void unregisterForVoiceRadioTechChanged(Handler h); void registerForImsNetworkStateChanged(Handler h, int what, Object obj); void unregisterForImsNetworkStateChanged(Handler h); /** * Fires on any transition into RadioState.isOn() * Fires immediately if currently in that state * In general, actions should be idempotent. State may change * before event is received. */ void registerForOn(Handler h, int what, Object obj); void unregisterForOn(Handler h); /** * Fires on any transition out of RadioState.isAvailable() * Fires immediately if currently in that state * In general, actions should be idempotent. State may change * before event is received. */ void registerForAvailable(Handler h, int what, Object obj); void unregisterForAvailable(Handler h); /** * Fires on any transition into !RadioState.isAvailable() * Fires immediately if currently in that state * In general, actions should be idempotent. State may change * before event is received. */ void registerForNotAvailable(Handler h, int what, Object obj); void unregisterForNotAvailable(Handler h); /** * Fires on any transition into RADIO_OFF or !RadioState.isAvailable() * Fires immediately if currently in that state * In general, actions should be idempotent. State may change * before event is received. */ void registerForOffOrNotAvailable(Handler h, int what, Object obj); void unregisterForOffOrNotAvailable(Handler h); /** * Fires on any change in ICC status */ void registerForIccStatusChanged(Handler h, int what, Object obj); void unregisterForIccStatusChanged(Handler h); void registerForCallStateChanged(Handler h, int what, Object obj); void unregisterForCallStateChanged(Handler h); void registerForVoiceNetworkStateChanged(Handler h, int what, Object obj); void unregisterForVoiceNetworkStateChanged(Handler h); void registerForDataNetworkStateChanged(Handler h, int what, Object obj); void unregisterForDataNetworkStateChanged(Handler h); /** InCall voice privacy notifications */ void registerForInCallVoicePrivacyOn(Handler h, int what, Object obj); void unregisterForInCallVoicePrivacyOn(Handler h); void registerForInCallVoicePrivacyOff(Handler h, int what, Object obj); void unregisterForInCallVoicePrivacyOff(Handler h); /** Single Radio Voice Call State progress notifications */ void registerForSrvccStateChanged(Handler h, int what, Object obj); void unregisterForSrvccStateChanged(Handler h); /** * Handlers for subscription status change indications. * * @param h Handler for subscription status change messages. * @param what User-defined message code. * @param obj User object. */ void registerForSubscriptionStatusChanged(Handler h, int what, Object obj); void unregisterForSubscriptionStatusChanged(Handler h); /** * fires on any change in hardware configuration. */ void registerForHardwareConfigChanged(Handler h, int what, Object obj); void unregisterForHardwareConfigChanged(Handler h); /** * unlike the register* methods, there's only one new 3GPP format SMS handler. * if you need to unregister, you should also tell the radio to stop * sending SMS's to you (via AT+CNMI) * * AsyncResult.result is a String containing the SMS PDU */ void setOnNewGsmSms(Handler h, int what, Object obj); void unSetOnNewGsmSms(Handler h); /** * unlike the register* methods, there's only one new 3GPP2 format SMS handler. * if you need to unregister, you should also tell the radio to stop * sending SMS's to you (via AT+CNMI) * * AsyncResult.result is a String containing the SMS PDU */ void setOnNewCdmaSms(Handler h, int what, Object obj); void unSetOnNewCdmaSms(Handler h); /** * Set the handler for SMS Cell Broadcast messages. * * AsyncResult.result is a byte array containing the SMS-CB PDU */ void setOnNewGsmBroadcastSms(Handler h, int what, Object obj); void unSetOnNewGsmBroadcastSms(Handler h); /** * Register for NEW_SMS_ON_SIM unsolicited message * * AsyncResult.result is an int array containing the index of new SMS */ void setOnSmsOnSim(Handler h, int what, Object obj); void unSetOnSmsOnSim(Handler h); /** * Register for NEW_SMS_STATUS_REPORT unsolicited message * * AsyncResult.result is a String containing the status report PDU */ void setOnSmsStatus(Handler h, int what, Object obj); void unSetOnSmsStatus(Handler h); /** * unlike the register* methods, there's only one NITZ time handler * * AsyncResult.result is an Object[] * ((Object[])AsyncResult.result)[0] is a String containing the NITZ time string * ((Object[])AsyncResult.result)[1] is a Long containing the milliseconds since boot as * returned by elapsedRealtime() when this NITZ time * was posted. * * Please note that the delivery of this message may be delayed several * seconds on system startup */ void setOnNITZTime(Handler h, int what, Object obj); void unSetOnNITZTime(Handler h); /** * unlike the register* methods, there's only one USSD notify handler * * Represents the arrival of a USSD "notify" message, which may * or may not have been triggered by a previous USSD send * * AsyncResult.result is a String[] * ((String[])(AsyncResult.result))[0] contains status code * "0" USSD-Notify -- text in ((const char **)data)[1] * "1" USSD-Request -- text in ((const char **)data)[1] * "2" Session terminated by network * "3" other local client (eg, SIM Toolkit) has responded * "4" Operation not supported * "5" Network timeout * * ((String[])(AsyncResult.result))[1] contains the USSD message * The numeric representations of these are in USSD_MODE_* */ void setOnUSSD(Handler h, int what, Object obj); void unSetOnUSSD(Handler h); /** * unlike the register* methods, there's only one signal strength handler * AsyncResult.result is an int[2] * response.obj.result[0] is received signal strength (0-31, 99) * response.obj.result[1] is bit error rate (0-7, 99) * as defined in TS 27.007 8.5 */ void setOnSignalStrengthUpdate(Handler h, int what, Object obj); void unSetOnSignalStrengthUpdate(Handler h); /** * Sets the handler for SIM/RUIM SMS storage full unsolicited message. * Unlike the register* methods, there's only one notification handler * * @param h Handler for notification message. * @param what User-defined message code. * @param obj User object. */ void setOnIccSmsFull(Handler h, int what, Object obj); void unSetOnIccSmsFull(Handler h); /** * Sets the handler for SIM Refresh notifications. * * @param h Handler for notification message. * @param what User-defined message code. * @param obj User object. */ void registerForIccRefresh(Handler h, int what, Object obj); void unregisterForIccRefresh(Handler h); void setOnIccRefresh(Handler h, int what, Object obj); void unsetOnIccRefresh(Handler h); /** * Sets the handler for RING notifications. * Unlike the register* methods, there's only one notification handler * * @param h Handler for notification message. * @param what User-defined message code. * @param obj User object. */ void setOnCallRing(Handler h, int what, Object obj); void unSetOnCallRing(Handler h); /** * Sets the handler for RESTRICTED_STATE changed notification, * eg, for Domain Specific Access Control * unlike the register* methods, there's only one signal strength handler * * AsyncResult.result is an int[1] * response.obj.result[0] is a bitmask of RIL_RESTRICTED_STATE_* values */ void setOnRestrictedStateChanged(Handler h, int what, Object obj); void unSetOnRestrictedStateChanged(Handler h); /** * Sets the handler for Supplementary Service Notifications. * Unlike the register* methods, there's only one notification handler * * @param h Handler for notification message. * @param what User-defined message code. * @param obj User object. */ void setOnSuppServiceNotification(Handler h, int what, Object obj); void unSetOnSuppServiceNotification(Handler h); /** * Sets the handler for Session End Notifications for CAT. * Unlike the register* methods, there's only one notification handler * * @param h Handler for notification message. * @param what User-defined message code. * @param obj User object. */ void setOnCatSessionEnd(Handler h, int what, Object obj); void unSetOnCatSessionEnd(Handler h); /** * Sets the handler for Proactive Commands for CAT. * Unlike the register* methods, there's only one notification handler * * @param h Handler for notification message. * @param what User-defined message code. * @param obj User object. */ void setOnCatProactiveCmd(Handler h, int what, Object obj); void unSetOnCatProactiveCmd(Handler h); /** * Sets the handler for Event Notifications for CAT. * Unlike the register* methods, there's only one notification handler * * @param h Handler for notification message. * @param what User-defined message code. * @param obj User object. */ void setOnCatEvent(Handler h, int what, Object obj); void unSetOnCatEvent(Handler h); /** * Sets the handler for Call Set Up Notifications for CAT. * Unlike the register* methods, there's only one notification handler * * @param h Handler for notification message. * @param what User-defined message code. * @param obj User object. */ void setOnCatCallSetUp(Handler h, int what, Object obj); void unSetOnCatCallSetUp(Handler h); /** * Enables/disbables supplementary service related notifications from * the network. * * @param enable true to enable notifications, false to disable. * @param result Message to be posted when command completes. */ void setSuppServiceNotifications(boolean enable, Message result); //void unSetSuppServiceNotifications(Handler h); /** * Sets the handler for Alpha Notification during STK Call Control. * Unlike the register* methods, there's only one notification handler * * @param h Handler for notification message. * @param what User-defined message code. * @param obj User object. */ void setOnCatCcAlphaNotify(Handler h, int what, Object obj); void unSetOnCatCcAlphaNotify(Handler h); /** * Sets the handler for notifying Suplementary Services (SS) * Data during STK Call Control. * Unlike the register* methods, there's only one notification handler * * @param h Handler for notification message. * @param what User-defined message code. * @param obj User object. */ void setOnSs(Handler h, int what, Object obj); void unSetOnSs(Handler h); /** * Sets the handler for Event Notifications for CDMA Display Info. * Unlike the register* methods, there's only one notification handler * * @param h Handler for notification message. * @param what User-defined message code. * @param obj User object. */ void registerForDisplayInfo(Handler h, int what, Object obj); void unregisterForDisplayInfo(Handler h); /** * Sets the handler for Event Notifications for CallWaiting Info. * Unlike the register* methods, there's only one notification handler * * @param h Handler for notification message. * @param what User-defined message code. * @param obj User object. */ void registerForCallWaitingInfo(Handler h, int what, Object obj); void unregisterForCallWaitingInfo(Handler h); /** * Sets the handler for Event Notifications for Signal Info. * Unlike the register* methods, there's only one notification handler * * @param h Handler for notification message. * @param what User-defined message code. * @param obj User object. */ void registerForSignalInfo(Handler h, int what, Object obj); void unregisterForSignalInfo(Handler h); /** * Registers the handler for CDMA number information record * Unlike the register* methods, there's only one notification handler * * @param h Handler for notification message. * @param what User-defined message code. * @param obj User object. */ void registerForNumberInfo(Handler h, int what, Object obj); void unregisterForNumberInfo(Handler h); /** * Registers the handler for CDMA redirected number Information record * Unlike the register* methods, there's only one notification handler * * @param h Handler for notification message. * @param what User-defined message code. * @param obj User object. */ void registerForRedirectedNumberInfo(Handler h, int what, Object obj); void unregisterForRedirectedNumberInfo(Handler h); /** * Registers the handler for CDMA line control information record * Unlike the register* methods, there's only one notification handler * * @param h Handler for notification message. * @param what User-defined message code. * @param obj User object. */ void registerForLineControlInfo(Handler h, int what, Object obj); void unregisterForLineControlInfo(Handler h); /** * Registers the handler for CDMA T53 CLIR information record * Unlike the register* methods, there's only one notification handler * * @param h Handler for notification message. * @param what User-defined message code. * @param obj User object. */ void registerFoT53ClirlInfo(Handler h, int what, Object obj); void unregisterForT53ClirInfo(Handler h); /** * Registers the handler for CDMA T53 audio control information record * Unlike the register* methods, there's only one notification handler * * @param h Handler for notification message. * @param what User-defined message code. * @param obj User object. */ void registerForT53AudioControlInfo(Handler h, int what, Object obj); void unregisterForT53AudioControlInfo(Handler h); /** * Fires on if Modem enters Emergency Callback mode */ void setEmergencyCallbackMode(Handler h, int what, Object obj); /** * Fires on any CDMA OTA provision status change */ void registerForCdmaOtaProvision(Handler h,int what, Object obj); void unregisterForCdmaOtaProvision(Handler h); /** * Registers the handler when out-band ringback tone is needed.<p> * * Messages received from this: * Message.obj will be an AsyncResult * AsyncResult.userObj = obj * AsyncResult.result = boolean. <p> */ void registerForRingbackTone(Handler h, int what, Object obj); void unregisterForRingbackTone(Handler h); /** * Registers the handler when mute/unmute need to be resent to get * uplink audio during a call.<p> * * @param h Handler for notification message. * @param what User-defined message code. * @param obj User object. * */ void registerForResendIncallMute(Handler h, int what, Object obj); void unregisterForResendIncallMute(Handler h); /** * Registers the handler for when Cdma subscription changed events * * @param h Handler for notification message. * @param what User-defined message code. * @param obj User object. * */ void registerForCdmaSubscriptionChanged(Handler h, int what, Object obj); void unregisterForCdmaSubscriptionChanged(Handler h); /** * Registers the handler for when Cdma prl changed events * * @param h Handler for notification message. * @param what User-defined message code. * @param obj User object. * */ void registerForCdmaPrlChanged(Handler h, int what, Object obj); void unregisterForCdmaPrlChanged(Handler h); /** * Registers the handler for when Cdma prl changed events * * @param h Handler for notification message. * @param what User-defined message code. * @param obj User object. * */ void registerForExitEmergencyCallbackMode(Handler h, int what, Object obj); void unregisterForExitEmergencyCallbackMode(Handler h); /** * Registers the handler for RIL_UNSOL_RIL_CONNECT events. * * When ril connects or disconnects a message is sent to the registrant * which contains an AsyncResult, ar, in msg.obj. The ar.result is an * Integer which is the version of the ril or -1 if the ril disconnected. * * @param h Handler for notification message. * @param what User-defined message code. * @param obj User object. */ void registerForRilConnected(Handler h, int what, Object obj); void unregisterForRilConnected(Handler h); /** * Supply the ICC PIN to the ICC card * * returned message * retMsg.obj = AsyncResult ar * ar.exception carries exception on failure * This exception is CommandException with an error of PASSWORD_INCORRECT * if the password is incorrect * * ar.result is an optional array of integers where the first entry * is the number of attempts remaining before the ICC will be PUK locked. * * ar.exception and ar.result are null on success */ void supplyIccPin(String pin, Message result); /** * Supply the PIN for the app with this AID on the ICC card * * AID (Application ID), See ETSI 102.221 8.1 and 101.220 4 * * returned message * retMsg.obj = AsyncResult ar * ar.exception carries exception on failure * This exception is CommandException with an error of PASSWORD_INCORRECT * if the password is incorrect * * ar.result is an optional array of integers where the first entry * is the number of attempts remaining before the ICC will be PUK locked. * * ar.exception and ar.result are null on success */ void supplyIccPinForApp(String pin, String aid, Message result); /** * Supply the ICC PUK and newPin to the ICC card * * returned message * retMsg.obj = AsyncResult ar * ar.exception carries exception on failure * This exception is CommandException with an error of PASSWORD_INCORRECT * if the password is incorrect * * ar.result is an optional array of integers where the first entry * is the number of attempts remaining before the ICC is permanently disabled. * * ar.exception and ar.result are null on success */ void supplyIccPuk(String puk, String newPin, Message result); /** * Supply the PUK, new pin for the app with this AID on the ICC card * * AID (Application ID), See ETSI 102.221 8.1 and 101.220 4 * * retMsg.obj = AsyncResult ar * ar.exception carries exception on failure * This exception is CommandException with an error of PASSWORD_INCORRECT * if the password is incorrect * * ar.result is an optional array of integers where the first entry * is the number of attempts remaining before the ICC is permanently disabled. * * ar.exception and ar.result are null on success */ void supplyIccPukForApp(String puk, String newPin, String aid, Message result); /** * Supply the ICC PIN2 to the ICC card * Only called following operation where ICC_PIN2 was * returned as a a failure from a previous operation * * returned message * retMsg.obj = AsyncResult ar * ar.exception carries exception on failure * This exception is CommandException with an error of PASSWORD_INCORRECT * if the password is incorrect * * ar.result is an optional array of integers where the first entry * is the number of attempts remaining before the ICC will be PUK locked. * * ar.exception and ar.result are null on success */ void supplyIccPin2(String pin2, Message result); /** * Supply the PIN2 for the app with this AID on the ICC card * Only called following operation where ICC_PIN2 was * returned as a a failure from a previous operation * * AID (Application ID), See ETSI 102.221 8.1 and 101.220 4 * * returned message * retMsg.obj = AsyncResult ar * ar.exception carries exception on failure * This exception is CommandException with an error of PASSWORD_INCORRECT * if the password is incorrect * * ar.result is an optional array of integers where the first entry * is the number of attempts remaining before the ICC will be PUK locked. * * ar.exception and ar.result are null on success */ void supplyIccPin2ForApp(String pin2, String aid, Message result); /** * Supply the SIM PUK2 to the SIM card * Only called following operation where SIM_PUK2 was * returned as a a failure from a previous operation * * returned message * retMsg.obj = AsyncResult ar * ar.exception carries exception on failure * This exception is CommandException with an error of PASSWORD_INCORRECT * if the password is incorrect * * ar.result is an optional array of integers where the first entry * is the number of attempts remaining before the ICC is permanently disabled. * * ar.exception and ar.result are null on success */ void supplyIccPuk2(String puk2, String newPin2, Message result); /** * Supply the PUK2, newPin2 for the app with this AID on the ICC card * Only called following operation where SIM_PUK2 was * returned as a a failure from a previous operation * * AID (Application ID), See ETSI 102.221 8.1 and 101.220 4 * * returned message * retMsg.obj = AsyncResult ar * ar.exception carries exception on failure * This exception is CommandException with an error of PASSWORD_INCORRECT * if the password is incorrect * * ar.result is an optional array of integers where the first entry * is the number of attempts remaining before the ICC is permanently disabled. * * ar.exception and ar.result are null on success */ void supplyIccPuk2ForApp(String puk2, String newPin2, String aid, Message result); // TODO: Add java doc and indicate that msg.arg1 contains the number of attempts remaining. void changeIccPin(String oldPin, String newPin, Message result); void changeIccPinForApp(String oldPin, String newPin, String aidPtr, Message result); void changeIccPin2(String oldPin2, String newPin2, Message result); void changeIccPin2ForApp(String oldPin2, String newPin2, String aidPtr, Message result); void changeBarringPassword(String facility, String oldPwd, String newPwd, Message result); void supplyNetworkDepersonalization(String netpin, Message result); /** * returned message * retMsg.obj = AsyncResult ar * ar.exception carries exception on failure * ar.userObject contains the orignal value of result.obj * ar.result contains a List of DriverCall * The ar.result List is sorted by DriverCall.index */ void getCurrentCalls (Message result); /** * returned message * retMsg.obj = AsyncResult ar * ar.exception carries exception on failure * ar.userObject contains the orignal value of result.obj * ar.result contains a List of DataCallResponse * @deprecated Do not use. */ @Deprecated void getPDPContextList(Message result); /** * returned message * retMsg.obj = AsyncResult ar * ar.exception carries exception on failure * ar.userObject contains the orignal value of result.obj * ar.result contains a List of DataCallResponse */ void getDataCallList(Message result); /** * returned message * retMsg.obj = AsyncResult ar * ar.exception carries exception on failure * ar.userObject contains the orignal value of result.obj * ar.result is null on success and failure * * CLIR_DEFAULT == on "use subscription default value" * CLIR_SUPPRESSION == on "CLIR suppression" (allow CLI presentation) * CLIR_INVOCATION == on "CLIR invocation" (restrict CLI presentation) */ void dial (String address, int clirMode, Message result); /** * returned message * retMsg.obj = AsyncResult ar * ar.exception carries exception on failure * ar.userObject contains the orignal value of result.obj * ar.result is null on success and failure * * CLIR_DEFAULT == on "use subscription default value" * CLIR_SUPPRESSION == on "CLIR suppression" (allow CLI presentation) * CLIR_INVOCATION == on "CLIR invocation" (restrict CLI presentation) */ void dial(String address, int clirMode, UUSInfo uusInfo, Message result); /** * returned message * retMsg.obj = AsyncResult ar * ar.exception carries exception on failure * ar.userObject contains the orignal value of result.obj * ar.result is String containing IMSI on success */ void getIMSI(Message result); /** * returned message * retMsg.obj = AsyncResult ar * ar.exception carries exception on failure * ar.userObject contains the orignal value of result.obj * ar.result is String containing IMSI on success */ void getIMSIForApp(String aid, Message result); /** * returned message * retMsg.obj = AsyncResult ar * ar.exception carries exception on failure * ar.userObject contains the orignal value of result.obj * ar.result is String containing IMEI on success */ void getIMEI(Message result); /** * returned message * retMsg.obj = AsyncResult ar * ar.exception carries exception on failure * ar.userObject contains the orignal value of result.obj * ar.result is String containing IMEISV on success */ void getIMEISV(Message result); /** * Hang up one individual connection. * returned message * retMsg.obj = AsyncResult ar * ar.exception carries exception on failure * ar.userObject contains the orignal value of result.obj * ar.result is null on success and failure * * 3GPP 22.030 6.5.5 * "Releases a specific active call X" */ void hangupConnection (int gsmIndex, Message result); /** * 3GPP 22.030 6.5.5 * "Releases all held calls or sets User Determined User Busy (UDUB) * for a waiting call." * ar.exception carries exception on failure * ar.userObject contains the orignal value of result.obj * ar.result is null on success and failure */ void hangupWaitingOrBackground (Message result); /** * 3GPP 22.030 6.5.5 * "Releases all active calls (if any exist) and accepts * the other (held or waiting) call." * * ar.exception carries exception on failure * ar.userObject contains the orignal value of result.obj * ar.result is null on success and failure */ void hangupForegroundResumeBackground (Message result); /** * 3GPP 22.030 6.5.5 * "Places all active calls (if any exist) on hold and accepts * the other (held or waiting) call." * * ar.exception carries exception on failure * ar.userObject contains the orignal value of result.obj * ar.result is null on success and failure */ void switchWaitingOrHoldingAndActive (Message result); /** * 3GPP 22.030 6.5.5 * "Adds a held call to the conversation" * * ar.exception carries exception on failure * ar.userObject contains the orignal value of result.obj * ar.result is null on success and failure */ void conference (Message result); /** * Set preferred Voice Privacy (VP). * * @param enable true is enhanced and false is normal VP * @param result is a callback message */ void setPreferredVoicePrivacy(boolean enable, Message result); /** * Get currently set preferred Voice Privacy (VP) mode. * * @param result is a callback message */ void getPreferredVoicePrivacy(Message result); /** * 3GPP 22.030 6.5.5 * "Places all active calls on hold except call X with which * communication shall be supported." */ void separateConnection (int gsmIndex, Message result); /** * * ar.exception carries exception on failure * ar.userObject contains the orignal value of result.obj * ar.result is null on success and failure */ void acceptCall (Message result); /** * also known as UDUB * ar.exception carries exception on failure * ar.userObject contains the orignal value of result.obj * ar.result is null on success and failure */ void rejectCall (Message result); /** * 3GPP 22.030 6.5.5 * "Connects the two calls and disconnects the subscriber from both calls" * * ar.exception carries exception on failure * ar.userObject contains the orignal value of result.obj * ar.result is null on success and failure */ void explicitCallTransfer (Message result); /** * cause code returned as int[0] in Message.obj.response * Returns integer cause code defined in TS 24.008 * Annex H or closest approximation. * Most significant codes: * - Any defined in 22.001 F.4 (for generating busy/congestion) * - Cause 68: ACM >= ACMMax */ void getLastCallFailCause (Message result); /** * Reason for last PDP context deactivate or failure to activate * cause code returned as int[0] in Message.obj.response * returns an integer cause code defined in TS 24.008 * section 6.1.3.1.3 or close approximation * @deprecated Do not use. */ @Deprecated void getLastPdpFailCause (Message result); /** * The preferred new alternative to getLastPdpFailCause * that is also CDMA-compatible. */ void getLastDataCallFailCause (Message result); void setMute (boolean enableMute, Message response); void getMute (Message response); /** * response.obj is an AsyncResult * response.obj.result is an int[2] * response.obj.result[0] is received signal strength (0-31, 99) * response.obj.result[1] is bit error rate (0-7, 99) * as defined in TS 27.007 8.5 */ void getSignalStrength (Message response); /** * response.obj.result is an int[3] * response.obj.result[0] is registration state 0-5 from TS 27.007 7.2 * response.obj.result[1] is LAC if registered or -1 if not * response.obj.result[2] is CID if registered or -1 if not * valid LAC and CIDs are 0x0000 - 0xffff * * Please note that registration state 4 ("unknown") is treated * as "out of service" above */ void getVoiceRegistrationState (Message response); /** * response.obj.result is an int[3] * response.obj.result[0] is registration state 0-5 from TS 27.007 7.2 * response.obj.result[1] is LAC if registered or -1 if not * response.obj.result[2] is CID if registered or -1 if not * valid LAC and CIDs are 0x0000 - 0xffff * * Please note that registration state 4 ("unknown") is treated * as "out of service" above */ void getDataRegistrationState (Message response); /** * response.obj.result is a String[3] * response.obj.result[0] is long alpha or null if unregistered * response.obj.result[1] is short alpha or null if unregistered * response.obj.result[2] is numeric or null if unregistered */ void getOperator(Message response); /** * ar.exception carries exception on failure * ar.userObject contains the orignal value of result.obj * ar.result is null on success and failure */ void sendDtmf(char c, Message result); /** * ar.exception carries exception on failure * ar.userObject contains the orignal value of result.obj * ar.result is null on success and failure */ void startDtmf(char c, Message result); /** * ar.exception carries exception on failure * ar.userObject contains the orignal value of result.obj * ar.result is null on success and failure */ void stopDtmf(Message result); /** * ar.exception carries exception on failure * ar.userObject contains the orignal value of result.obj * ar.result is null on success and failure */ void sendBurstDtmf(String dtmfString, int on, int off, Message result); /** * smscPDU is smsc address in PDU form GSM BCD format prefixed * by a length byte (as expected by TS 27.005) or NULL for default SMSC * pdu is SMS in PDU format as an ASCII hex string * less the SMSC address */ void sendSMS (String smscPDU, String pdu, Message response); /** * Send an SMS message, Identical to sendSMS, * except that more messages are expected to be sent soon * smscPDU is smsc address in PDU form GSM BCD format prefixed * by a length byte (as expected by TS 27.005) or NULL for default SMSC * pdu is SMS in PDU format as an ASCII hex string * less the SMSC address */ void sendSMSExpectMore (String smscPDU, String pdu, Message response); /** * @param pdu is CDMA-SMS in internal pseudo-PDU format * @param response sent when operation completes */ void sendCdmaSms(byte[] pdu, Message response); /** * send SMS over IMS with 3GPP/GSM SMS format * @param smscPDU is smsc address in PDU form GSM BCD format prefixed * by a length byte (as expected by TS 27.005) or NULL for default SMSC * @param pdu is SMS in PDU format as an ASCII hex string * less the SMSC address * @param retry indicates if this is a retry; 0 == not retry, nonzero = retry * @param messageRef valid field if retry is set to nonzero. * Contains messageRef from RIL_SMS_Response corresponding to failed MO SMS * @param response sent when operation completes */ void sendImsGsmSms (String smscPDU, String pdu, int retry, int messageRef, Message response); /** * send SMS over IMS with 3GPP2/CDMA SMS format * @param pdu is CDMA-SMS in internal pseudo-PDU format * @param response sent when operation completes * @param retry indicates if this is a retry; 0 == not retry, nonzero = retry * @param messageRef valid field if retry is set to nonzero. * Contains messageRef from RIL_SMS_Response corresponding to failed MO SMS * @param response sent when operation completes */ void sendImsCdmaSms(byte[] pdu, int retry, int messageRef, Message response); /** * Deletes the specified SMS record from SIM memory (EF_SMS). * * @param index index of the SMS record to delete * @param response sent when operation completes */ void deleteSmsOnSim(int index, Message response); /** * Deletes the specified SMS record from RUIM memory (EF_SMS in DF_CDMA). * * @param index index of the SMS record to delete * @param response sent when operation completes */ void deleteSmsOnRuim(int index, Message response); /** * Writes an SMS message to SIM memory (EF_SMS). * * @param status status of message on SIM. One of: * SmsManger.STATUS_ON_ICC_READ * SmsManger.STATUS_ON_ICC_UNREAD * SmsManger.STATUS_ON_ICC_SENT * SmsManger.STATUS_ON_ICC_UNSENT * @param pdu message PDU, as hex string * @param response sent when operation completes. * response.obj will be an AsyncResult, and will indicate * any error that may have occurred (eg, out of memory). */ void writeSmsToSim(int status, String smsc, String pdu, Message response); void writeSmsToRuim(int status, String pdu, Message response); void setRadioPower(boolean on, Message response); void acknowledgeLastIncomingGsmSms(boolean success, int cause, Message response); void acknowledgeLastIncomingCdmaSms(boolean success, int cause, Message response); /** * Acknowledge successful or failed receipt of last incoming SMS, * including acknowledgement TPDU to send as the RP-User-Data element * of the RP-ACK or RP-ERROR PDU. * * @param success true to send RP-ACK, false to send RP-ERROR * @param ackPdu the acknowledgement TPDU in hexadecimal format * @param response sent when operation completes. */ void acknowledgeIncomingGsmSmsWithPdu(boolean success, String ackPdu, Message response); /** * parameters equivalent to 27.007 AT+CRSM command * response.obj will be an AsyncResult * response.obj.result will be an IccIoResult on success */ void iccIO (int command, int fileid, String path, int p1, int p2, int p3, String data, String pin2, Message response); /** * parameters equivalent to 27.007 AT+CRSM command * response.obj will be an AsyncResult * response.obj.userObj will be a IccIoResult on success */ void iccIOForApp (int command, int fileid, String path, int p1, int p2, int p3, String data, String pin2, String aid, Message response); /** * (AsyncResult)response.obj).result is an int[] with element [0] set to * 1 for "CLIP is provisioned", and 0 for "CLIP is not provisioned". * * @param response is callback message */ void queryCLIP(Message response); /** * response.obj will be a an int[2] * * response.obj[0] will be TS 27.007 +CLIR parameter 'n' * 0 presentation indicator is used according to the subscription of the CLIR service * 1 CLIR invocation * 2 CLIR suppression * * response.obj[1] will be TS 27.007 +CLIR parameter 'm' * 0 CLIR not provisioned * 1 CLIR provisioned in permanent mode * 2 unknown (e.g. no network, etc.) * 3 CLIR temporary mode presentation restricted * 4 CLIR temporary mode presentation allowed */ void getCLIR(Message response); /** * clirMode is one of the CLIR_* constants above * * response.obj is null */ void setCLIR(int clirMode, Message response); /** * (AsyncResult)response.obj).result is an int[] with element [0] set to * 0 for disabled, 1 for enabled. * * @param serviceClass is a sum of SERVICE_CLASS_* * @param response is callback message */ void queryCallWaiting(int serviceClass, Message response); /** * @param enable is true to enable, false to disable * @param serviceClass is a sum of SERVICE_CLASS_* * @param response is callback message */ void setCallWaiting(boolean enable, int serviceClass, Message response); /** * @param action is one of CF_ACTION_* * @param cfReason is one of CF_REASON_* * @param serviceClass is a sum of SERVICE_CLASSS_* */ void setCallForward(int action, int cfReason, int serviceClass, String number, int timeSeconds, Message response); /** * cfReason is one of CF_REASON_* * * ((AsyncResult)response.obj).result will be an array of * CallForwardInfo's * * An array of length 0 means "disabled for all codes" */ void queryCallForwardStatus(int cfReason, int serviceClass, String number, Message response); void setNetworkSelectionModeAutomatic(Message response); void setNetworkSelectionModeManual(String operatorNumeric, Message response); /** * Queries whether the current network selection mode is automatic * or manual * * ((AsyncResult)response.obj).result is an int[] with element [0] being * a 0 for automatic selection and a 1 for manual selection */ void getNetworkSelectionMode(Message response); /** * Queries the currently available networks * * ((AsyncResult)response.obj).result is a List of NetworkInfo objects */ void getAvailableNetworks(Message response); void getBasebandVersion (Message response); /** * (AsyncResult)response.obj).result will be an Integer representing * the sum of enabled service classes (sum of SERVICE_CLASS_*) * * @param facility one of CB_FACILTY_* * @param password password or "" if not required * @param serviceClass is a sum of SERVICE_CLASS_* * @param response is callback message */ void queryFacilityLock (String facility, String password, int serviceClass, Message response); /** * (AsyncResult)response.obj).result will be an Integer representing * the sum of enabled service classes (sum of SERVICE_CLASS_*) for the * application with appId. * * @param facility one of CB_FACILTY_* * @param password password or "" if not required * @param serviceClass is a sum of SERVICE_CLASS_* * @param appId is application Id or null if none * @param response is callback message */ void queryFacilityLockForApp(String facility, String password, int serviceClass, String appId, Message response); /** * @param facility one of CB_FACILTY_* * @param lockState true means lock, false means unlock * @param password password or "" if not required * @param serviceClass is a sum of SERVICE_CLASS_* * @param response is callback message */ void setFacilityLock (String facility, boolean lockState, String password, int serviceClass, Message response); /** * Set the facility lock for the app with this AID on the ICC card. * * @param facility one of CB_FACILTY_* * @param lockState true means lock, false means unlock * @param password password or "" if not required * @param serviceClass is a sum of SERVICE_CLASS_* * @param appId is application Id or null if none * @param response is callback message */ void setFacilityLockForApp(String facility, boolean lockState, String password, int serviceClass, String appId, Message response); void sendUSSD (String ussdString, Message response); /** * Cancels a pending USSD session if one exists. * @param response callback message */ void cancelPendingUssd (Message response); void resetRadio(Message result); /** * Assign a specified band for RF configuration. * * @param bandMode one of BM_*_BAND * @param response is callback message */ void setBandMode (int bandMode, Message response); /** * Query the list of band mode supported by RF. * * @param response is callback message * ((AsyncResult)response.obj).result is an int[] where int[0] is * the size of the array and the rest of each element representing * one available BM_*_BAND */ void queryAvailableBandMode (Message response); /** * Requests to set the preferred network type for searching and registering * (CS/PS domain, RAT, and operation mode) * @param networkType one of NT_*_TYPE * @param response is callback message */ void setPreferredNetworkType(int networkType , Message response); /** * Query the preferred network type setting * * @param response is callback message to report one of NT_*_TYPE */ void getPreferredNetworkType(Message response); /** * Query neighboring cell ids * * @param response s callback message to cell ids */ void getNeighboringCids(Message response); /** * Request to enable/disable network state change notifications when * location information (lac and/or cid) has changed. * * @param enable true to enable, false to disable * @param response callback message */ void setLocationUpdates(boolean enable, Message response); /** * Gets the default SMSC address. * * @param result Callback message contains the SMSC address. */ void getSmscAddress(Message result); /** * Sets the default SMSC address. * * @param address new SMSC address * @param result Callback message is empty on completion */ void setSmscAddress(String address, Message result); /** * Indicates whether there is storage available for new SMS messages. * @param available true if storage is available * @param result callback message */ void reportSmsMemoryStatus(boolean available, Message result); /** * Indicates to the vendor ril that StkService is running * and is ready to receive RIL_UNSOL_STK_XXXX commands. * * @param result callback message */ void reportStkServiceIsRunning(Message result); void invokeOemRilRequestRaw(byte[] data, Message response); void invokeOemRilRequestStrings(String[] strings, Message response); /** * Fires when RIL_UNSOL_OEM_HOOK_RAW is received from the RIL. */ void setOnUnsolOemHookRaw(Handler h, int what, Object obj); void unSetOnUnsolOemHookRaw(Handler h); /** * Send TERMINAL RESPONSE to the SIM, after processing a proactive command * sent by the SIM. * * @param contents String containing SAT/USAT response in hexadecimal * format starting with first byte of response data. See * TS 102 223 for details. * @param response Callback message */ public void sendTerminalResponse(String contents, Message response); /** * Send ENVELOPE to the SIM, after processing a proactive command sent by * the SIM. * * @param contents String containing SAT/USAT response in hexadecimal * format starting with command tag. See TS 102 223 for * details. * @param response Callback message */ public void sendEnvelope(String contents, Message response); /** * Send ENVELOPE to the SIM, such as an SMS-PP data download envelope * for a SIM data download message. This method has one difference * from {@link #sendEnvelope}: The SW1 and SW2 status bytes from the UICC response * are returned along with the response data. * * response.obj will be an AsyncResult * response.obj.result will be an IccIoResult on success * * @param contents String containing SAT/USAT response in hexadecimal * format starting with command tag. See TS 102 223 for * details. * @param response Callback message */ public void sendEnvelopeWithStatus(String contents, Message response); /** * Accept or reject the call setup request from SIM. * * @param accept true if the call is to be accepted, false otherwise. * @param response Callback message */ public void handleCallSetupRequestFromSim(boolean accept, Message response); /** * Activate or deactivate cell broadcast SMS for GSM. * * @param activate * true = activate, false = deactivate * @param result Callback message is empty on completion */ public void setGsmBroadcastActivation(boolean activate, Message result); /** * Configure cell broadcast SMS for GSM. * * @param response Callback message is empty on completion */ public void setGsmBroadcastConfig(SmsBroadcastConfigInfo[] config, Message response); /** * Query the current configuration of cell broadcast SMS of GSM. * * @param response * Callback message contains the configuration from the modem * on completion */ public void getGsmBroadcastConfig(Message response); //***** new Methods for CDMA support /** * Request the device ESN / MEID / IMEI / IMEISV. * "response" is const char ** * [0] is IMEI if GSM subscription is available * [1] is IMEISV if GSM subscription is available * [2] is ESN if CDMA subscription is available * [3] is MEID if CDMA subscription is available */ public void getDeviceIdentity(Message response); /** * Request the device MDN / H_SID / H_NID / MIN. * "response" is const char ** * [0] is MDN if CDMA subscription is available * [1] is a comma separated list of H_SID (Home SID) in decimal format * if CDMA subscription is available * [2] is a comma separated list of H_NID (Home NID) in decimal format * if CDMA subscription is available * [3] is MIN (10 digits, MIN2+MIN1) if CDMA subscription is available */ public void getCDMASubscription(Message response); /** * Send Flash Code. * "response" is is NULL * [0] is a FLASH string */ public void sendCDMAFeatureCode(String FeatureCode, Message response); /** Set the Phone type created */ void setPhoneType(int phoneType); /** * Query the CDMA roaming preference setting * * @param response is callback message to report one of CDMA_RM_* */ void queryCdmaRoamingPreference(Message response); /** * Requests to set the CDMA roaming preference * @param cdmaRoamingType one of CDMA_RM_* * @param response is callback message */ void setCdmaRoamingPreference(int cdmaRoamingType, Message response); /** * Requests to set the CDMA subscription mode * @param cdmaSubscriptionType one of CDMA_SUBSCRIPTION_* * @param response is callback message */ void setCdmaSubscriptionSource(int cdmaSubscriptionType, Message response); /** * Requests to get the CDMA subscription srouce * @param response is callback message */ void getCdmaSubscriptionSource(Message response); /** * Set the TTY mode * * @param ttyMode one of the following: * - {@link com.android.internal.telephony.Phone#TTY_MODE_OFF} * - {@link com.android.internal.telephony.Phone#TTY_MODE_FULL} * - {@link com.android.internal.telephony.Phone#TTY_MODE_HCO} * - {@link com.android.internal.telephony.Phone#TTY_MODE_VCO} * @param response is callback message */ void setTTYMode(int ttyMode, Message response); /** * Query the TTY mode * (AsyncResult)response.obj).result is an int[] with element [0] set to * tty mode: * - {@link com.android.internal.telephony.Phone#TTY_MODE_OFF} * - {@link com.android.internal.telephony.Phone#TTY_MODE_FULL} * - {@link com.android.internal.telephony.Phone#TTY_MODE_HCO} * - {@link com.android.internal.telephony.Phone#TTY_MODE_VCO} * @param response is callback message */ void queryTTYMode(Message response); /** * Setup a packet data connection On successful completion, the result * message will return a {@link com.android.internal.telephony.dataconnection.DataCallResponse} * object containing the connection information. * * @param radioTechnology * indicates whether to setup connection on radio technology CDMA * (0) or GSM/UMTS (1) * @param profile * Profile Number or NULL to indicate default profile * @param apn * the APN to connect to if radio technology is GSM/UMTS. * Otherwise null for CDMA. * @param user * the username for APN, or NULL * @param password * the password for APN, or NULL * @param authType * the PAP / CHAP auth type. Values is one of SETUP_DATA_AUTH_* * @param protocol * one of the PDP_type values in TS 27.007 section 10.1.1. * For example, "IP", "IPV6", "IPV4V6", or "PPP". * @param result * Callback message */ public void setupDataCall(String radioTechnology, String profile, String apn, String user, String password, String authType, String protocol, Message result); /** * Deactivate packet data connection * * @param cid * The connection ID * @param reason * Data disconnect reason. * @param result * Callback message is empty on completion */ public void deactivateDataCall(int cid, int reason, Message result); /** * Activate or deactivate cell broadcast SMS for CDMA. * * @param activate * true = activate, false = deactivate * @param result * Callback message is empty on completion */ public void setCdmaBroadcastActivation(boolean activate, Message result); /** * Configure cdma cell broadcast SMS. * * @param response * Callback message is empty on completion */ public void setCdmaBroadcastConfig(CdmaSmsBroadcastConfigInfo[] configs, Message response); /** * Query the current configuration of cdma cell broadcast SMS. * * @param result * Callback message contains the configuration from the modem on completion */ public void getCdmaBroadcastConfig(Message result); /** * Requests the radio's system selection module to exit emergency callback mode. * This function should only be called from CDMAPHone.java. * * @param response callback message */ public void exitEmergencyCallbackMode(Message response); /** * Request the status of the ICC and UICC cards. * * @param result * Callback message containing {@link IccCardStatus} structure for the card. */ public void getIccCardStatus(Message result); /** * Return if the current radio is LTE on CDMA. This * is a tri-state return value as for a period of time * the mode may be unknown. * * @return {@link PhoneConstants#LTE_ON_CDMA_UNKNOWN}, {@link PhoneConstants#LTE_ON_CDMA_FALSE} * or {@link PhoneConstants#LTE_ON_CDMA_TRUE} */ public int getLteOnCdmaMode(); /** * Request the ISIM application on the UICC to perform the AKA * challenge/response algorithm for IMS authentication. The nonce string * and challenge response are Base64 encoded Strings. * * @param nonce the nonce string to pass with the ISIM authentication request * @param response a callback message with the String response in the obj field * @deprecated * @see requestIccSimAuthentication */ public void requestIsimAuthentication(String nonce, Message response); /** * Request the SIM application on the UICC to perform authentication * challenge/response algorithm. The data string and challenge response are * Base64 encoded Strings. * Can support EAP-SIM, EAP-AKA with results encoded per 3GPP TS 31.102. * * @param authContext is the P2 parameter that specifies the authentication context per 3GPP TS * 31.102 (Section 7.1.2) * @param data authentication challenge data * @param aid used to determine which application/slot to send the auth command to. See ETSI * 102.221 8.1 and 101.220 4 * @param response a callback message with the String response in the obj field */ public void requestIccSimAuthentication(int authContext, String data, String aid, Message response); /** * Get the current Voice Radio Technology. * * AsyncResult.result is an int array with the first value * being one of the ServiceState.RIL_RADIO_TECHNOLOGY_xxx values. * * @param result is sent back to handler and result.obj is a AsyncResult */ void getVoiceRadioTechnology(Message result); /** * Return the current set of CellInfo records * * AsyncResult.result is a of Collection<CellInfo> * * @param result is sent back to handler and result.obj is a AsyncResult */ void getCellInfoList(Message result); /** * Sets the minimum time in milli-seconds between when RIL_UNSOL_CELL_INFO_LIST * should be invoked. * * The default, 0, means invoke RIL_UNSOL_CELL_INFO_LIST when any of the reported * information changes. Setting the value to INT_MAX(0x7fffffff) means never issue * A RIL_UNSOL_CELL_INFO_LIST. * * * @param rateInMillis is sent back to handler and result.obj is a AsyncResult * @param response.obj is AsyncResult ar when sent to associated handler * ar.exception carries exception on failure or null on success * otherwise the error. */ void setCellInfoListRate(int rateInMillis, Message response); /** * Fires when RIL_UNSOL_CELL_INFO_LIST is received from the RIL. */ void registerForCellInfoList(Handler h, int what, Object obj); void unregisterForCellInfoList(Handler h); /** * Set Initial Attach Apn * * @param apn * the APN to connect to if radio technology is GSM/UMTS. * @param protocol * one of the PDP_type values in TS 27.007 section 10.1.1. * For example, "IP", "IPV6", "IPV4V6", or "PPP". * @param authType * authentication protocol used for this PDP context * (None: 0, PAP: 1, CHAP: 2, PAP&CHAP: 3) * @param username * the username for APN, or NULL * @param password * the password for APN, or NULL * @param result * callback message contains the information of SUCCESS/FAILURE */ public void setInitialAttachApn(String apn, String protocol, int authType, String username, String password, Message result); /** * Set data profiles in modem * * @param dps * Array of the data profiles set to modem * @param result * callback message contains the information of SUCCESS/FAILURE */ public void setDataProfile(DataProfile[] dps, Message result); /** * Notifiy that we are testing an emergency call */ public void testingEmergencyCall(); /** * Open a logical channel to the SIM. * * Input parameters equivalent to TS 27.007 AT+CCHO command. * * @param AID Application id. See ETSI 102.221 and 101.220. * @param response Callback message. response.obj will be an int [1] with * element [0] set to the id of the logical channel. */ public void iccOpenLogicalChannel(String AID, Message response); /** * Close a previously opened logical channel to the SIM. * * Input parameters equivalent to TS 27.007 AT+CCHC command. * * @param channel Channel id. Id of the channel to be closed. * @param response Callback message. */ public void iccCloseLogicalChannel(int channel, Message response); /** * Exchange APDUs with the SIM on a logical channel. * * Input parameters equivalent to TS 27.007 AT+CGLA command. * * @param channel Channel id of the channel to use for communication. Has to * be greater than zero. * @param cla Class of the APDU command. * @param instruction Instruction of the APDU command. * @param p1 P1 value of the APDU command. * @param p2 P2 value of the APDU command. * @param p3 P3 value of the APDU command. If p3 is negative a 4 byte APDU * is sent to the SIM. * @param data Data to be sent with the APDU. * @param response Callback message. response.obj.userObj will be * an IccIoResult on success. */ public void iccTransmitApduLogicalChannel(int channel, int cla, int instruction, int p1, int p2, int p3, String data, Message response); /** * Exchange APDUs with the SIM on a basic channel. * * Input parameters equivalent to TS 27.007 AT+CSIM command. * * @param cla Class of the APDU command. * @param instruction Instruction of the APDU command. * @param p1 P1 value of the APDU command. * @param p2 P2 value of the APDU command. * @param p3 P3 value of the APDU command. If p3 is negative a 4 byte APDU * is sent to the SIM. * @param data Data to be sent with the APDU. * @param response Callback message. response.obj.userObj will be * an IccIoResult on success. */ public void iccTransmitApduBasicChannel(int cla, int instruction, int p1, int p2, int p3, String data, Message response); /** * Read one of the NV items defined in {@link RadioNVItems} / {@code ril_nv_items.h}. * Used for device configuration by some CDMA operators. * * @param itemID the ID of the item to read * @param response callback message with the String response in the obj field */ void nvReadItem(int itemID, Message response); /** * Write one of the NV items defined in {@link RadioNVItems} / {@code ril_nv_items.h}. * Used for device configuration by some CDMA operators. * * @param itemID the ID of the item to read * @param itemValue the value to write, as a String * @param response Callback message. */ void nvWriteItem(int itemID, String itemValue, Message response); /** * Update the CDMA Preferred Roaming List (PRL) in the radio NV storage. * Used for device configuration by some CDMA operators. * * @param preferredRoamingList byte array containing the new PRL * @param response Callback message. */ void nvWriteCdmaPrl(byte[] preferredRoamingList, Message response); /** * Perform the specified type of NV config reset. The radio will be taken offline * and the device must be rebooted after erasing the NV. Used for device * configuration by some CDMA operators. * * @param resetType reset type: 1: reload NV reset, 2: erase NV reset, 3: factory NV reset * @param response Callback message. */ void nvResetConfig(int resetType, Message response); /** * returned message * retMsg.obj = AsyncResult ar * ar.exception carries exception on failure * ar.userObject contains the orignal value of result.obj * ar.result contains a List of HardwareConfig */ void getHardwareConfig (Message result); /** * @return version of the ril. */ int getRilVersion(); /** * Sets user selected subscription at Modem. * * @param slotId * Slot. * @param appIndex * Application index in the card. * @param subId * Indicates subscription 0 or subscription 1. * @param subStatus * Activation status, 1 = activate and 0 = deactivate. * @param result * Callback message contains the information of SUCCESS/FAILURE. */ // FIXME Update the doc and consider modifying the request to make more generic. public void setUiccSubscription(int slotId, int appIndex, int subId, int subStatus, Message result); /** * Tells the modem if data is allowed or not. * * @param allowed * true = allowed, false = not alowed * @param result * Callback message contains the information of SUCCESS/FAILURE. */ // FIXME We may need to pass AID and slotid also public void setDataAllowed(boolean allowed, Message result); /** * Inform RIL that the device is shutting down * * @param result Callback message contains the information of SUCCESS/FAILURE */ public void requestShutdown(Message result); /** * Set phone radio type and access technology. * * @param rc the phone radio capability defined in * RadioCapability. It's a input object used to transfer parameter to logic modem * * @param result Callback message. */ public void setRadioCapability(RadioCapability rc, Message result); /** * Get phone radio capability * * @param result Callback message. */ public void getRadioCapability(Message result); /** * Registers the handler when phone radio capability is changed. * * @param h Handler for notification message. * @param what User-defined message code. * @param obj User object. */ public void registerForRadioCapabilityChanged(Handler h, int what, Object obj); /** * Unregister for notifications when phone radio capability is changed. * * @param h Handler to be removed from the registrant list. */ public void unregisterForRadioCapabilityChanged(Handler h); /** * Start LCE (Link Capacity Estimation) service with a desired reporting interval. * * @param reportIntervalMs * LCE info reporting interval (ms). * * @param result Callback message contains the current LCE status. * {byte status, int actualIntervalMs} */ public void startLceService(int reportIntervalMs, boolean pullMode, Message result); /** * Stop LCE service. * * @param result Callback message contains the current LCE status: * {byte status, int actualIntervalMs} * */ public void stopLceService(Message result); /** * Pull LCE service for capacity data. * * @param result Callback message contains the capacity info: * {int capacityKbps, byte confidenceLevel, byte lceSuspendedTemporarily} */ public void pullLceData(Message result); /** * Register a LCE info listener. * * @param h Handler for notification message. * @param what User-defined message code. * @param obj User object. */ void registerForLceInfo(Handler h, int what, Object obj); /** * Unregister the LCE Info listener. * * @param h handle to be removed. */ void unregisterForLceInfo(Handler h); /** * * Get modem activity info and stats * * @param result Callback message contains the modem activity information */ public void getModemActivityInfo(Message result); }