/*
* Copyright (C) 2008 The Android Open Source Project
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
package com.android.internal.telephony.cdma.sms;
import com.android.internal.telephony.cdma.sms.CdmaSmsSubaddress;
public final class SmsEnvelope {
/**
* Message Types
* (See 3GPP2 C.S0015-B 3.4.1)
*/
static public final int MESSAGE_TYPE_POINT_TO_POINT = 0x00;
static public final int MESSAGE_TYPE_BROADCAST = 0x01;
static public final int MESSAGE_TYPE_ACKNOWLEDGE = 0x02;
/**
* Supported Teleservices
* (See 3GPP2 N.S0005 and TIA-41)
*/
static public final int TELESERVICE_NOT_SET = 0x0000;
static public final int TELESERVICE_WMT = 0x1002;
static public final int TELESERVICE_VMN = 0x1003;
static public final int TELESERVICE_WAP = 0x1004;
static public final int TELESERVICE_WEMT = 0x1005;
/**
* The following are defined as extensions to the standard teleservices
*/
// Voice mail notification through Message Waiting Indication in CDMA mode or Analog mode.
// Defined in 3GPP2 C.S-0005, 3.7.5.6, an Info Record containing an 8-bit number with the
// number of messages waiting, it's used by some CDMA carriers for a voice mail count.
static public final int TELESERVICE_MWI = 0x40000;
// ServiceCategories for Cell Broadcast, see 3GPP2 C.R1001 table 9.3.1-1
//static public final int SERVICECATEGORY_EMERGENCY = 0x0010;
//...
/**
* maximum lengths for fields as defined in ril_cdma_sms.h
*/
static public final int SMS_BEARER_DATA_MAX = 255;
/**
* Provides the type of a SMS message like point to point, broadcast or acknowledge
*/
public int messageType;
/**
* The 16-bit Teleservice parameter identifies which upper layer service access point is sending
* or receiving the message.
* (See 3GPP2 C.S0015-B, v2, 3.4.3.1)
*/
public int teleService = TELESERVICE_NOT_SET;
/**
* The 16-bit service category parameter identifies the type of service provided
* by the SMS message.
* (See 3GPP2 C.S0015-B, v2, 3.4.3.2)
*/
public int serviceCategory;
/**
* The origination address identifies the originator of the SMS message.
* (See 3GPP2 C.S0015-B, v2, 3.4.3.3)
*/
public CdmaSmsAddress origAddress;
/**
* The destination address identifies the target of the SMS message.
* (See 3GPP2 C.S0015-B, v2, 3.4.3.3)
*/
public CdmaSmsAddress destAddress;
/**
* The origination subaddress identifies the originator of the SMS message.
* (See 3GPP2 C.S0015-B, v2, 3.4.3.4)
*/
public CdmaSmsSubaddress origSubaddress;
/**
* The 6-bit bearer reply parameter is used to request the return of a
* SMS Acknowledge Message.
* (See 3GPP2 C.S0015-B, v2, 3.4.3.5)
*/
public int bearerReply;
/**
* Cause Code values:
* The cause code parameters are an indication whether an SMS error has occurred and if so,
* whether the condition is considered temporary or permanent.
* ReplySeqNo 6-bit value,
* ErrorClass 2-bit value,
* CauseCode 0-bit or 8-bit value
* (See 3GPP2 C.S0015-B, v2, 3.4.3.6)
*/
public byte replySeqNo;
public byte errorClass;
public byte causeCode;
/**
* encoded bearer data
* (See 3GPP2 C.S0015-B, v2, 3.4.3.7)
*/
public byte[] bearerData;
public SmsEnvelope() {
// nothing to see here
}
}