/*
* Copyright 2012-2017 Amazon.com, Inc. or its affiliates. All Rights Reserved.
*
* Licensed under the Apache License, Version 2.0 (the "License"). You may not use this file except in compliance with
* the License. A copy of the License is located at
*
* http://aws.amazon.com/apache2.0
*
* or in the "license" file accompanying this file. This file is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR
* CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions
* and limitations under the License.
*/
package com.amazonaws.services.route53.model;
import java.io.Serializable;
import javax.annotation.Generated;
import com.amazonaws.AmazonWebServiceRequest;
/**
* <p>
* A complex type that contains information about a request to update a health check.
* </p>
*
* @see <a href="http://docs.aws.amazon.com/goto/WebAPI/route53-2013-04-01/UpdateHealthCheck" target="_top">AWS API
* Documentation</a>
*/
@Generated("com.amazonaws:aws-java-sdk-code-generator")
public class UpdateHealthCheckRequest extends com.amazonaws.AmazonWebServiceRequest implements Serializable, Cloneable {
/**
* <p>
* The ID for the health check for which you want detailed information. When you created the health check,
* <code>CreateHealthCheck</code> returned the ID in the response, in the <code>HealthCheckId</code> element.
* </p>
*/
private String healthCheckId;
/**
* <p>
* A sequential counter that Amazon Route 53 sets to <code>1</code> when you create a health check and increments by
* 1 each time you update settings for the health check.
* </p>
* <p>
* We recommend that you use <code>GetHealthCheck</code> or <code>ListHealthChecks</code> to get the current value
* of <code>HealthCheckVersion</code> for the health check that you want to update, and that you include that value
* in your <code>UpdateHealthCheck</code> request. This prevents Amazon Route 53 from overwriting an intervening
* update:
* </p>
* <ul>
* <li>
* <p>
* If the value in the <code>UpdateHealthCheck</code> request matches the value of <code>HealthCheckVersion</code>
* in the health check, Amazon Route 53 updates the health check with the new settings.
* </p>
* </li>
* <li>
* <p>
* If the value of <code>HealthCheckVersion</code> in the health check is greater, the health check was changed
* after you got the version number. Amazon Route 53 does not update the health check, and it returns a
* <code>HealthCheckVersionMismatch</code> error.
* </p>
* </li>
* </ul>
*/
private Long healthCheckVersion;
/**
* <p>
* The IPv4 or IPv6 IP address for the endpoint that you want Amazon Route 53 to perform health checks on. If you
* don't specify a value for <code>IPAddress</code>, Amazon Route 53 sends a DNS request to resolve the domain name
* that you specify in <code>FullyQualifiedDomainName</code> at the interval that you specify in
* <code>RequestInterval</code>. Using an IP address that is returned by DNS, Amazon Route 53 then checks the health
* of the endpoint.
* </p>
* <p>
* Use one of the following formats for the value of <code>IPAddress</code>:
* </p>
* <ul>
* <li>
* <p>
* <b>IPv4 address</b>: four values between 0 and 255, separated by periods (.), for example,
* <code>192.0.2.44</code>.
* </p>
* </li>
* <li>
* <p>
* <b>IPv6 address</b>: eight groups of four hexadecimal values, separated by colons (:), for example,
* <code>2001:0db8:85a3:0000:0000:abcd:0001:2345</code>. You can also shorten IPv6 addresses as described in RFC
* 5952, for example, <code>2001:db8:85a3::abcd:1:2345</code>.
* </p>
* </li>
* </ul>
* <p>
* If the endpoint is an EC2 instance, we recommend that you create an Elastic IP address, associate it with your
* EC2 instance, and specify the Elastic IP address for <code>IPAddress</code>. This ensures that the IP address of
* your instance never changes. For more information, see the applicable documentation:
* </p>
* <ul>
* <li>
* <p>
* Linux: <a href="http://docs.aws.amazon.com/AWSEC2/latest/UserGuide/elastic-ip-addresses-eip.html">Elastic IP
* Addresses (EIP)</a> in the <i>Amazon EC2 User Guide for Linux Instances</i>
* </p>
* </li>
* <li>
* <p>
* Windows: <a href="http://docs.aws.amazon.com/AWSEC2/latest/WindowsGuide/elastic-ip-addresses-eip.html">Elastic IP
* Addresses (EIP)</a> in the <i>Amazon EC2 User Guide for Windows Instances</i>
* </p>
* </li>
* </ul>
* <note>
* <p>
* If a health check already has a value for <code>IPAddress</code>, you can change the value. However, you can't
* update an existing health check to add or remove the value of <code>IPAddress</code>.
* </p>
* </note>
* <p>
* For more information, see <a>UpdateHealthCheckRequest$FullyQualifiedDomainName</a>.
* </p>
* <p>
* Constraints: Amazon Route 53 can't check the health of endpoints for which the IP address is in local, private,
* non-routable, or multicast ranges. For more information about IP addresses for which you can't create health
* checks, see the following documents:
* </p>
* <ul>
* <li>
* <p>
* <a href="https://tools.ietf.org/html/rfc5735">RFC 5735, Special Use IPv4 Addresses</a>
* </p>
* </li>
* <li>
* <p>
* <a href="https://tools.ietf.org/html/rfc6598">RFC 6598, IANA-Reserved IPv4 Prefix for Shared Address Space</a>
* </p>
* </li>
* <li>
* <p>
* <a href="https://tools.ietf.org/html/rfc5156">RFC 5156, Special-Use IPv6 Addresses</a>
* </p>
* </li>
* </ul>
*/
private String iPAddress;
/**
* <p>
* The port on the endpoint on which you want Amazon Route 53 to perform health checks.
* </p>
*/
private Integer port;
/**
* <p>
* The path that you want Amazon Route 53 to request when performing health checks. The path can be any value for
* which your endpoint will return an HTTP status code of 2xx or 3xx when the endpoint is healthy, for example the
* file /docs/route53-health-check.html.
* </p>
* <p>
* Specify this value only if you want to change it.
* </p>
*/
private String resourcePath;
/**
* <p>
* Amazon Route 53 behavior depends on whether you specify a value for <code>IPAddress</code>.
* </p>
* <note>
* <p>
* If a health check already has a value for <code>IPAddress</code>, you can change the value. However, you can't
* update an existing health check to add or remove the value of <code>IPAddress</code>.
* </p>
* </note>
* <p>
* <b>If you specify a value for</b> <code>IPAddress</code>:
* </p>
* <p>
* Amazon Route 53 sends health check requests to the specified IPv4 or IPv6 address and passes the value of
* <code>FullyQualifiedDomainName</code> in the <code>Host</code> header for all health checks except TCP health
* checks. This is typically the fully qualified DNS name of the endpoint on which you want Amazon Route 53 to
* perform health checks.
* </p>
* <p>
* When Amazon Route 53 checks the health of an endpoint, here is how it constructs the <code>Host</code> header:
* </p>
* <ul>
* <li>
* <p>
* If you specify a value of <code>80</code> for <code>Port</code> and <code>HTTP</code> or
* <code>HTTP_STR_MATCH</code> for <code>Type</code>, Amazon Route 53 passes the value of
* <code>FullyQualifiedDomainName</code> to the endpoint in the <code>Host</code> header.
* </p>
* </li>
* <li>
* <p>
* If you specify a value of <code>443</code> for <code>Port</code> and <code>HTTPS</code> or
* <code>HTTPS_STR_MATCH</code> for <code>Type</code>, Amazon Route 53 passes the value of
* <code>FullyQualifiedDomainName</code> to the endpoint in the <code>Host</code> header.
* </p>
* </li>
* <li>
* <p>
* If you specify another value for <code>Port</code> and any value except <code>TCP</code> for <code>Type</code>,
* Amazon Route 53 passes <i> <code>FullyQualifiedDomainName</code>:<code>Port</code> </i> to the endpoint in the
* <code>Host</code> header.
* </p>
* </li>
* </ul>
* <p>
* If you don't specify a value for <code>FullyQualifiedDomainName</code>, Amazon Route 53 substitutes the value of
* <code>IPAddress</code> in the <code>Host</code> header in each of the above cases.
* </p>
* <p>
* <b>If you don't specify a value for</b> <code>IPAddress</code>:
* </p>
* <p>
* If you don't specify a value for <code>IPAddress</code>, Amazon Route 53 sends a DNS request to the domain that
* you specify in <code>FullyQualifiedDomainName</code> at the interval you specify in <code>RequestInterval</code>.
* Using an IPv4 address that is returned by DNS, Amazon Route 53 then checks the health of the endpoint.
* </p>
* <note>
* <p>
* If you don't specify a value for <code>IPAddress</code>, Amazon Route 53 uses only IPv4 to send health checks to
* the endpoint. If there's no resource record set with a type of A for the name that you specify for
* <code>FullyQualifiedDomainName</code>, the health check fails with a "DNS resolution failed" error.
* </p>
* </note>
* <p>
* If you want to check the health of weighted, latency, or failover resource record sets and you choose to specify
* the endpoint only by <code>FullyQualifiedDomainName</code>, we recommend that you create a separate health check
* for each endpoint. For example, create a health check for each HTTP server that is serving content for
* www.example.com. For the value of <code>FullyQualifiedDomainName</code>, specify the domain name of the server
* (such as <code>us-east-2-www.example.com</code>), not the name of the resource record sets (www.example.com).
* </p>
* <important>
* <p>
* In this configuration, if the value of <code>FullyQualifiedDomainName</code> matches the name of the resource
* record sets and you then associate the health check with those resource record sets, health check results will be
* unpredictable.
* </p>
* </important>
* <p>
* In addition, if the value of <code>Type</code> is <code>HTTP</code>, <code>HTTPS</code>,
* <code>HTTP_STR_MATCH</code>, or <code>HTTPS_STR_MATCH</code>, Amazon Route 53 passes the value of
* <code>FullyQualifiedDomainName</code> in the <code>Host</code> header, as it does when you specify a value for
* <code>IPAddress</code>. If the value of <code>Type</code> is <code>TCP</code>, Amazon Route 53 doesn't pass a
* <code>Host</code> header.
* </p>
*/
private String fullyQualifiedDomainName;
/**
* <p>
* If the value of <code>Type</code> is <code>HTTP_STR_MATCH</code> or <code>HTTP_STR_MATCH</code>, the string that
* you want Amazon Route 53 to search for in the response body from the specified resource. If the string appears in
* the response body, Amazon Route 53 considers the resource healthy. (You can't change the value of
* <code>Type</code> when you update a health check.)
* </p>
*/
private String searchString;
/**
* <p>
* The number of consecutive health checks that an endpoint must pass or fail for Amazon Route 53 to change the
* current status of the endpoint from unhealthy to healthy or vice versa. For more information, see <a href=
* "http://docs.aws.amazon.com/Route53/latest/DeveloperGuide/dns-failover-determining-health-of-endpoints.html">How
* Amazon Route 53 Determines Whether an Endpoint Is Healthy</a> in the <i>Amazon Route 53 Developer Guide</i>.
* </p>
* <p>
* If you don't specify a value for <code>FailureThreshold</code>, the default value is three health checks.
* </p>
*/
private Integer failureThreshold;
/**
* <p>
* Specify whether you want Amazon Route 53 to invert the status of a health check, for example, to consider a
* health check unhealthy when it otherwise would be considered healthy.
* </p>
*/
private Boolean inverted;
/**
* <p>
* The number of child health checks that are associated with a <code>CALCULATED</code> health that Amazon Route 53
* must consider healthy for the <code>CALCULATED</code> health check to be considered healthy. To specify the child
* health checks that you want to associate with a <code>CALCULATED</code> health check, use the
* <code>ChildHealthChecks</code> and <code>ChildHealthCheck</code> elements.
* </p>
* <p>
* Note the following:
* </p>
* <ul>
* <li>
* <p>
* If you specify a number greater than the number of child health checks, Amazon Route 53 always considers this
* health check to be unhealthy.
* </p>
* </li>
* <li>
* <p>
* If you specify <code>0</code>, Amazon Route 53 always considers this health check to be healthy.
* </p>
* </li>
* </ul>
*/
private Integer healthThreshold;
/**
* <p>
* A complex type that contains one <code>ChildHealthCheck</code> element for each health check that you want to
* associate with a <code>CALCULATED</code> health check.
* </p>
*/
private com.amazonaws.internal.SdkInternalList<String> childHealthChecks;
/**
* <p>
* Specify whether you want Amazon Route 53 to send the value of <code>FullyQualifiedDomainName</code> to the
* endpoint in the <code>client_hello</code> message during <code>TLS</code> negotiation. This allows the endpoint
* to respond to <code>HTTPS</code> health check requests with the applicable SSL/TLS certificate.
* </p>
* <p>
* Some endpoints require that HTTPS requests include the host name in the <code>client_hello</code> message. If you
* don't enable SNI, the status of the health check will be SSL alert <code>handshake_failure</code>. A health check
* can also have that status for other reasons. If SNI is enabled and you're still getting the error, check the
* SSL/TLS configuration on your endpoint and confirm that your certificate is valid.
* </p>
* <p>
* The SSL/TLS certificate on your endpoint includes a domain name in the <code>Common Name</code> field and
* possibly several more in the <code>Subject Alternative Names</code> field. One of the domain names in the
* certificate should match the value that you specify for <code>FullyQualifiedDomainName</code>. If the endpoint
* responds to the <code>client_hello</code> message with a certificate that does not include the domain name that
* you specified in <code>FullyQualifiedDomainName</code>, a health checker will retry the handshake. In the second
* attempt, the health checker will omit <code>FullyQualifiedDomainName</code> from the <code>client_hello</code>
* message.
* </p>
*/
private Boolean enableSNI;
/**
* <p>
* A complex type that contains one <code>Region</code> element for each region that you want Amazon Route 53 health
* checkers to check the specified endpoint from.
* </p>
*/
private com.amazonaws.internal.SdkInternalList<String> regions;
private AlarmIdentifier alarmIdentifier;
/**
* <p>
* When CloudWatch has insufficient data about the metric to determine the alarm state, the status that you want
* Amazon Route 53 to assign to the health check:
* </p>
* <ul>
* <li>
* <p>
* <code>Healthy</code>: Amazon Route 53 considers the health check to be healthy.
* </p>
* </li>
* <li>
* <p>
* <code>Unhealthy</code>: Amazon Route 53 considers the health check to be unhealthy.
* </p>
* </li>
* <li>
* <p>
* <code>LastKnownStatus</code>: Amazon Route 53 uses the status of the health check from the last time CloudWatch
* had sufficient data to determine the alarm state. For new health checks that have no last known status, the
* default status for the health check is healthy.
* </p>
* </li>
* </ul>
*/
private String insufficientDataHealthStatus;
/**
* <p>
* The ID for the health check for which you want detailed information. When you created the health check,
* <code>CreateHealthCheck</code> returned the ID in the response, in the <code>HealthCheckId</code> element.
* </p>
*
* @param healthCheckId
* The ID for the health check for which you want detailed information. When you created the health check,
* <code>CreateHealthCheck</code> returned the ID in the response, in the <code>HealthCheckId</code> element.
*/
public void setHealthCheckId(String healthCheckId) {
this.healthCheckId = healthCheckId;
}
/**
* <p>
* The ID for the health check for which you want detailed information. When you created the health check,
* <code>CreateHealthCheck</code> returned the ID in the response, in the <code>HealthCheckId</code> element.
* </p>
*
* @return The ID for the health check for which you want detailed information. When you created the health check,
* <code>CreateHealthCheck</code> returned the ID in the response, in the <code>HealthCheckId</code>
* element.
*/
public String getHealthCheckId() {
return this.healthCheckId;
}
/**
* <p>
* The ID for the health check for which you want detailed information. When you created the health check,
* <code>CreateHealthCheck</code> returned the ID in the response, in the <code>HealthCheckId</code> element.
* </p>
*
* @param healthCheckId
* The ID for the health check for which you want detailed information. When you created the health check,
* <code>CreateHealthCheck</code> returned the ID in the response, in the <code>HealthCheckId</code> element.
* @return Returns a reference to this object so that method calls can be chained together.
*/
public UpdateHealthCheckRequest withHealthCheckId(String healthCheckId) {
setHealthCheckId(healthCheckId);
return this;
}
/**
* <p>
* A sequential counter that Amazon Route 53 sets to <code>1</code> when you create a health check and increments by
* 1 each time you update settings for the health check.
* </p>
* <p>
* We recommend that you use <code>GetHealthCheck</code> or <code>ListHealthChecks</code> to get the current value
* of <code>HealthCheckVersion</code> for the health check that you want to update, and that you include that value
* in your <code>UpdateHealthCheck</code> request. This prevents Amazon Route 53 from overwriting an intervening
* update:
* </p>
* <ul>
* <li>
* <p>
* If the value in the <code>UpdateHealthCheck</code> request matches the value of <code>HealthCheckVersion</code>
* in the health check, Amazon Route 53 updates the health check with the new settings.
* </p>
* </li>
* <li>
* <p>
* If the value of <code>HealthCheckVersion</code> in the health check is greater, the health check was changed
* after you got the version number. Amazon Route 53 does not update the health check, and it returns a
* <code>HealthCheckVersionMismatch</code> error.
* </p>
* </li>
* </ul>
*
* @param healthCheckVersion
* A sequential counter that Amazon Route 53 sets to <code>1</code> when you create a health check and
* increments by 1 each time you update settings for the health check.</p>
* <p>
* We recommend that you use <code>GetHealthCheck</code> or <code>ListHealthChecks</code> to get the current
* value of <code>HealthCheckVersion</code> for the health check that you want to update, and that you
* include that value in your <code>UpdateHealthCheck</code> request. This prevents Amazon Route 53 from
* overwriting an intervening update:
* </p>
* <ul>
* <li>
* <p>
* If the value in the <code>UpdateHealthCheck</code> request matches the value of
* <code>HealthCheckVersion</code> in the health check, Amazon Route 53 updates the health check with the new
* settings.
* </p>
* </li>
* <li>
* <p>
* If the value of <code>HealthCheckVersion</code> in the health check is greater, the health check was
* changed after you got the version number. Amazon Route 53 does not update the health check, and it returns
* a <code>HealthCheckVersionMismatch</code> error.
* </p>
* </li>
*/
public void setHealthCheckVersion(Long healthCheckVersion) {
this.healthCheckVersion = healthCheckVersion;
}
/**
* <p>
* A sequential counter that Amazon Route 53 sets to <code>1</code> when you create a health check and increments by
* 1 each time you update settings for the health check.
* </p>
* <p>
* We recommend that you use <code>GetHealthCheck</code> or <code>ListHealthChecks</code> to get the current value
* of <code>HealthCheckVersion</code> for the health check that you want to update, and that you include that value
* in your <code>UpdateHealthCheck</code> request. This prevents Amazon Route 53 from overwriting an intervening
* update:
* </p>
* <ul>
* <li>
* <p>
* If the value in the <code>UpdateHealthCheck</code> request matches the value of <code>HealthCheckVersion</code>
* in the health check, Amazon Route 53 updates the health check with the new settings.
* </p>
* </li>
* <li>
* <p>
* If the value of <code>HealthCheckVersion</code> in the health check is greater, the health check was changed
* after you got the version number. Amazon Route 53 does not update the health check, and it returns a
* <code>HealthCheckVersionMismatch</code> error.
* </p>
* </li>
* </ul>
*
* @return A sequential counter that Amazon Route 53 sets to <code>1</code> when you create a health check and
* increments by 1 each time you update settings for the health check.</p>
* <p>
* We recommend that you use <code>GetHealthCheck</code> or <code>ListHealthChecks</code> to get the current
* value of <code>HealthCheckVersion</code> for the health check that you want to update, and that you
* include that value in your <code>UpdateHealthCheck</code> request. This prevents Amazon Route 53 from
* overwriting an intervening update:
* </p>
* <ul>
* <li>
* <p>
* If the value in the <code>UpdateHealthCheck</code> request matches the value of
* <code>HealthCheckVersion</code> in the health check, Amazon Route 53 updates the health check with the
* new settings.
* </p>
* </li>
* <li>
* <p>
* If the value of <code>HealthCheckVersion</code> in the health check is greater, the health check was
* changed after you got the version number. Amazon Route 53 does not update the health check, and it
* returns a <code>HealthCheckVersionMismatch</code> error.
* </p>
* </li>
*/
public Long getHealthCheckVersion() {
return this.healthCheckVersion;
}
/**
* <p>
* A sequential counter that Amazon Route 53 sets to <code>1</code> when you create a health check and increments by
* 1 each time you update settings for the health check.
* </p>
* <p>
* We recommend that you use <code>GetHealthCheck</code> or <code>ListHealthChecks</code> to get the current value
* of <code>HealthCheckVersion</code> for the health check that you want to update, and that you include that value
* in your <code>UpdateHealthCheck</code> request. This prevents Amazon Route 53 from overwriting an intervening
* update:
* </p>
* <ul>
* <li>
* <p>
* If the value in the <code>UpdateHealthCheck</code> request matches the value of <code>HealthCheckVersion</code>
* in the health check, Amazon Route 53 updates the health check with the new settings.
* </p>
* </li>
* <li>
* <p>
* If the value of <code>HealthCheckVersion</code> in the health check is greater, the health check was changed
* after you got the version number. Amazon Route 53 does not update the health check, and it returns a
* <code>HealthCheckVersionMismatch</code> error.
* </p>
* </li>
* </ul>
*
* @param healthCheckVersion
* A sequential counter that Amazon Route 53 sets to <code>1</code> when you create a health check and
* increments by 1 each time you update settings for the health check.</p>
* <p>
* We recommend that you use <code>GetHealthCheck</code> or <code>ListHealthChecks</code> to get the current
* value of <code>HealthCheckVersion</code> for the health check that you want to update, and that you
* include that value in your <code>UpdateHealthCheck</code> request. This prevents Amazon Route 53 from
* overwriting an intervening update:
* </p>
* <ul>
* <li>
* <p>
* If the value in the <code>UpdateHealthCheck</code> request matches the value of
* <code>HealthCheckVersion</code> in the health check, Amazon Route 53 updates the health check with the new
* settings.
* </p>
* </li>
* <li>
* <p>
* If the value of <code>HealthCheckVersion</code> in the health check is greater, the health check was
* changed after you got the version number. Amazon Route 53 does not update the health check, and it returns
* a <code>HealthCheckVersionMismatch</code> error.
* </p>
* </li>
* @return Returns a reference to this object so that method calls can be chained together.
*/
public UpdateHealthCheckRequest withHealthCheckVersion(Long healthCheckVersion) {
setHealthCheckVersion(healthCheckVersion);
return this;
}
/**
* <p>
* The IPv4 or IPv6 IP address for the endpoint that you want Amazon Route 53 to perform health checks on. If you
* don't specify a value for <code>IPAddress</code>, Amazon Route 53 sends a DNS request to resolve the domain name
* that you specify in <code>FullyQualifiedDomainName</code> at the interval that you specify in
* <code>RequestInterval</code>. Using an IP address that is returned by DNS, Amazon Route 53 then checks the health
* of the endpoint.
* </p>
* <p>
* Use one of the following formats for the value of <code>IPAddress</code>:
* </p>
* <ul>
* <li>
* <p>
* <b>IPv4 address</b>: four values between 0 and 255, separated by periods (.), for example,
* <code>192.0.2.44</code>.
* </p>
* </li>
* <li>
* <p>
* <b>IPv6 address</b>: eight groups of four hexadecimal values, separated by colons (:), for example,
* <code>2001:0db8:85a3:0000:0000:abcd:0001:2345</code>. You can also shorten IPv6 addresses as described in RFC
* 5952, for example, <code>2001:db8:85a3::abcd:1:2345</code>.
* </p>
* </li>
* </ul>
* <p>
* If the endpoint is an EC2 instance, we recommend that you create an Elastic IP address, associate it with your
* EC2 instance, and specify the Elastic IP address for <code>IPAddress</code>. This ensures that the IP address of
* your instance never changes. For more information, see the applicable documentation:
* </p>
* <ul>
* <li>
* <p>
* Linux: <a href="http://docs.aws.amazon.com/AWSEC2/latest/UserGuide/elastic-ip-addresses-eip.html">Elastic IP
* Addresses (EIP)</a> in the <i>Amazon EC2 User Guide for Linux Instances</i>
* </p>
* </li>
* <li>
* <p>
* Windows: <a href="http://docs.aws.amazon.com/AWSEC2/latest/WindowsGuide/elastic-ip-addresses-eip.html">Elastic IP
* Addresses (EIP)</a> in the <i>Amazon EC2 User Guide for Windows Instances</i>
* </p>
* </li>
* </ul>
* <note>
* <p>
* If a health check already has a value for <code>IPAddress</code>, you can change the value. However, you can't
* update an existing health check to add or remove the value of <code>IPAddress</code>.
* </p>
* </note>
* <p>
* For more information, see <a>UpdateHealthCheckRequest$FullyQualifiedDomainName</a>.
* </p>
* <p>
* Constraints: Amazon Route 53 can't check the health of endpoints for which the IP address is in local, private,
* non-routable, or multicast ranges. For more information about IP addresses for which you can't create health
* checks, see the following documents:
* </p>
* <ul>
* <li>
* <p>
* <a href="https://tools.ietf.org/html/rfc5735">RFC 5735, Special Use IPv4 Addresses</a>
* </p>
* </li>
* <li>
* <p>
* <a href="https://tools.ietf.org/html/rfc6598">RFC 6598, IANA-Reserved IPv4 Prefix for Shared Address Space</a>
* </p>
* </li>
* <li>
* <p>
* <a href="https://tools.ietf.org/html/rfc5156">RFC 5156, Special-Use IPv6 Addresses</a>
* </p>
* </li>
* </ul>
*
* @param iPAddress
* The IPv4 or IPv6 IP address for the endpoint that you want Amazon Route 53 to perform health checks on. If
* you don't specify a value for <code>IPAddress</code>, Amazon Route 53 sends a DNS request to resolve the
* domain name that you specify in <code>FullyQualifiedDomainName</code> at the interval that you specify in
* <code>RequestInterval</code>. Using an IP address that is returned by DNS, Amazon Route 53 then checks the
* health of the endpoint.</p>
* <p>
* Use one of the following formats for the value of <code>IPAddress</code>:
* </p>
* <ul>
* <li>
* <p>
* <b>IPv4 address</b>: four values between 0 and 255, separated by periods (.), for example,
* <code>192.0.2.44</code>.
* </p>
* </li>
* <li>
* <p>
* <b>IPv6 address</b>: eight groups of four hexadecimal values, separated by colons (:), for example,
* <code>2001:0db8:85a3:0000:0000:abcd:0001:2345</code>. You can also shorten IPv6 addresses as described in
* RFC 5952, for example, <code>2001:db8:85a3::abcd:1:2345</code>.
* </p>
* </li>
* </ul>
* <p>
* If the endpoint is an EC2 instance, we recommend that you create an Elastic IP address, associate it with
* your EC2 instance, and specify the Elastic IP address for <code>IPAddress</code>. This ensures that the IP
* address of your instance never changes. For more information, see the applicable documentation:
* </p>
* <ul>
* <li>
* <p>
* Linux: <a href="http://docs.aws.amazon.com/AWSEC2/latest/UserGuide/elastic-ip-addresses-eip.html">Elastic
* IP Addresses (EIP)</a> in the <i>Amazon EC2 User Guide for Linux Instances</i>
* </p>
* </li>
* <li>
* <p>
* Windows: <a
* href="http://docs.aws.amazon.com/AWSEC2/latest/WindowsGuide/elastic-ip-addresses-eip.html">Elastic IP
* Addresses (EIP)</a> in the <i>Amazon EC2 User Guide for Windows Instances</i>
* </p>
* </li>
* </ul>
* <note>
* <p>
* If a health check already has a value for <code>IPAddress</code>, you can change the value. However, you
* can't update an existing health check to add or remove the value of <code>IPAddress</code>.
* </p>
* </note>
* <p>
* For more information, see <a>UpdateHealthCheckRequest$FullyQualifiedDomainName</a>.
* </p>
* <p>
* Constraints: Amazon Route 53 can't check the health of endpoints for which the IP address is in local,
* private, non-routable, or multicast ranges. For more information about IP addresses for which you can't
* create health checks, see the following documents:
* </p>
* <ul>
* <li>
* <p>
* <a href="https://tools.ietf.org/html/rfc5735">RFC 5735, Special Use IPv4 Addresses</a>
* </p>
* </li>
* <li>
* <p>
* <a href="https://tools.ietf.org/html/rfc6598">RFC 6598, IANA-Reserved IPv4 Prefix for Shared Address
* Space</a>
* </p>
* </li>
* <li>
* <p>
* <a href="https://tools.ietf.org/html/rfc5156">RFC 5156, Special-Use IPv6 Addresses</a>
* </p>
* </li>
*/
public void setIPAddress(String iPAddress) {
this.iPAddress = iPAddress;
}
/**
* <p>
* The IPv4 or IPv6 IP address for the endpoint that you want Amazon Route 53 to perform health checks on. If you
* don't specify a value for <code>IPAddress</code>, Amazon Route 53 sends a DNS request to resolve the domain name
* that you specify in <code>FullyQualifiedDomainName</code> at the interval that you specify in
* <code>RequestInterval</code>. Using an IP address that is returned by DNS, Amazon Route 53 then checks the health
* of the endpoint.
* </p>
* <p>
* Use one of the following formats for the value of <code>IPAddress</code>:
* </p>
* <ul>
* <li>
* <p>
* <b>IPv4 address</b>: four values between 0 and 255, separated by periods (.), for example,
* <code>192.0.2.44</code>.
* </p>
* </li>
* <li>
* <p>
* <b>IPv6 address</b>: eight groups of four hexadecimal values, separated by colons (:), for example,
* <code>2001:0db8:85a3:0000:0000:abcd:0001:2345</code>. You can also shorten IPv6 addresses as described in RFC
* 5952, for example, <code>2001:db8:85a3::abcd:1:2345</code>.
* </p>
* </li>
* </ul>
* <p>
* If the endpoint is an EC2 instance, we recommend that you create an Elastic IP address, associate it with your
* EC2 instance, and specify the Elastic IP address for <code>IPAddress</code>. This ensures that the IP address of
* your instance never changes. For more information, see the applicable documentation:
* </p>
* <ul>
* <li>
* <p>
* Linux: <a href="http://docs.aws.amazon.com/AWSEC2/latest/UserGuide/elastic-ip-addresses-eip.html">Elastic IP
* Addresses (EIP)</a> in the <i>Amazon EC2 User Guide for Linux Instances</i>
* </p>
* </li>
* <li>
* <p>
* Windows: <a href="http://docs.aws.amazon.com/AWSEC2/latest/WindowsGuide/elastic-ip-addresses-eip.html">Elastic IP
* Addresses (EIP)</a> in the <i>Amazon EC2 User Guide for Windows Instances</i>
* </p>
* </li>
* </ul>
* <note>
* <p>
* If a health check already has a value for <code>IPAddress</code>, you can change the value. However, you can't
* update an existing health check to add or remove the value of <code>IPAddress</code>.
* </p>
* </note>
* <p>
* For more information, see <a>UpdateHealthCheckRequest$FullyQualifiedDomainName</a>.
* </p>
* <p>
* Constraints: Amazon Route 53 can't check the health of endpoints for which the IP address is in local, private,
* non-routable, or multicast ranges. For more information about IP addresses for which you can't create health
* checks, see the following documents:
* </p>
* <ul>
* <li>
* <p>
* <a href="https://tools.ietf.org/html/rfc5735">RFC 5735, Special Use IPv4 Addresses</a>
* </p>
* </li>
* <li>
* <p>
* <a href="https://tools.ietf.org/html/rfc6598">RFC 6598, IANA-Reserved IPv4 Prefix for Shared Address Space</a>
* </p>
* </li>
* <li>
* <p>
* <a href="https://tools.ietf.org/html/rfc5156">RFC 5156, Special-Use IPv6 Addresses</a>
* </p>
* </li>
* </ul>
*
* @return The IPv4 or IPv6 IP address for the endpoint that you want Amazon Route 53 to perform health checks on.
* If you don't specify a value for <code>IPAddress</code>, Amazon Route 53 sends a DNS request to resolve
* the domain name that you specify in <code>FullyQualifiedDomainName</code> at the interval that you
* specify in <code>RequestInterval</code>. Using an IP address that is returned by DNS, Amazon Route 53
* then checks the health of the endpoint.</p>
* <p>
* Use one of the following formats for the value of <code>IPAddress</code>:
* </p>
* <ul>
* <li>
* <p>
* <b>IPv4 address</b>: four values between 0 and 255, separated by periods (.), for example,
* <code>192.0.2.44</code>.
* </p>
* </li>
* <li>
* <p>
* <b>IPv6 address</b>: eight groups of four hexadecimal values, separated by colons (:), for example,
* <code>2001:0db8:85a3:0000:0000:abcd:0001:2345</code>. You can also shorten IPv6 addresses as described in
* RFC 5952, for example, <code>2001:db8:85a3::abcd:1:2345</code>.
* </p>
* </li>
* </ul>
* <p>
* If the endpoint is an EC2 instance, we recommend that you create an Elastic IP address, associate it with
* your EC2 instance, and specify the Elastic IP address for <code>IPAddress</code>. This ensures that the
* IP address of your instance never changes. For more information, see the applicable documentation:
* </p>
* <ul>
* <li>
* <p>
* Linux: <a href="http://docs.aws.amazon.com/AWSEC2/latest/UserGuide/elastic-ip-addresses-eip.html">Elastic
* IP Addresses (EIP)</a> in the <i>Amazon EC2 User Guide for Linux Instances</i>
* </p>
* </li>
* <li>
* <p>
* Windows: <a
* href="http://docs.aws.amazon.com/AWSEC2/latest/WindowsGuide/elastic-ip-addresses-eip.html">Elastic IP
* Addresses (EIP)</a> in the <i>Amazon EC2 User Guide for Windows Instances</i>
* </p>
* </li>
* </ul>
* <note>
* <p>
* If a health check already has a value for <code>IPAddress</code>, you can change the value. However, you
* can't update an existing health check to add or remove the value of <code>IPAddress</code>.
* </p>
* </note>
* <p>
* For more information, see <a>UpdateHealthCheckRequest$FullyQualifiedDomainName</a>.
* </p>
* <p>
* Constraints: Amazon Route 53 can't check the health of endpoints for which the IP address is in local,
* private, non-routable, or multicast ranges. For more information about IP addresses for which you can't
* create health checks, see the following documents:
* </p>
* <ul>
* <li>
* <p>
* <a href="https://tools.ietf.org/html/rfc5735">RFC 5735, Special Use IPv4 Addresses</a>
* </p>
* </li>
* <li>
* <p>
* <a href="https://tools.ietf.org/html/rfc6598">RFC 6598, IANA-Reserved IPv4 Prefix for Shared Address
* Space</a>
* </p>
* </li>
* <li>
* <p>
* <a href="https://tools.ietf.org/html/rfc5156">RFC 5156, Special-Use IPv6 Addresses</a>
* </p>
* </li>
*/
public String getIPAddress() {
return this.iPAddress;
}
/**
* <p>
* The IPv4 or IPv6 IP address for the endpoint that you want Amazon Route 53 to perform health checks on. If you
* don't specify a value for <code>IPAddress</code>, Amazon Route 53 sends a DNS request to resolve the domain name
* that you specify in <code>FullyQualifiedDomainName</code> at the interval that you specify in
* <code>RequestInterval</code>. Using an IP address that is returned by DNS, Amazon Route 53 then checks the health
* of the endpoint.
* </p>
* <p>
* Use one of the following formats for the value of <code>IPAddress</code>:
* </p>
* <ul>
* <li>
* <p>
* <b>IPv4 address</b>: four values between 0 and 255, separated by periods (.), for example,
* <code>192.0.2.44</code>.
* </p>
* </li>
* <li>
* <p>
* <b>IPv6 address</b>: eight groups of four hexadecimal values, separated by colons (:), for example,
* <code>2001:0db8:85a3:0000:0000:abcd:0001:2345</code>. You can also shorten IPv6 addresses as described in RFC
* 5952, for example, <code>2001:db8:85a3::abcd:1:2345</code>.
* </p>
* </li>
* </ul>
* <p>
* If the endpoint is an EC2 instance, we recommend that you create an Elastic IP address, associate it with your
* EC2 instance, and specify the Elastic IP address for <code>IPAddress</code>. This ensures that the IP address of
* your instance never changes. For more information, see the applicable documentation:
* </p>
* <ul>
* <li>
* <p>
* Linux: <a href="http://docs.aws.amazon.com/AWSEC2/latest/UserGuide/elastic-ip-addresses-eip.html">Elastic IP
* Addresses (EIP)</a> in the <i>Amazon EC2 User Guide for Linux Instances</i>
* </p>
* </li>
* <li>
* <p>
* Windows: <a href="http://docs.aws.amazon.com/AWSEC2/latest/WindowsGuide/elastic-ip-addresses-eip.html">Elastic IP
* Addresses (EIP)</a> in the <i>Amazon EC2 User Guide for Windows Instances</i>
* </p>
* </li>
* </ul>
* <note>
* <p>
* If a health check already has a value for <code>IPAddress</code>, you can change the value. However, you can't
* update an existing health check to add or remove the value of <code>IPAddress</code>.
* </p>
* </note>
* <p>
* For more information, see <a>UpdateHealthCheckRequest$FullyQualifiedDomainName</a>.
* </p>
* <p>
* Constraints: Amazon Route 53 can't check the health of endpoints for which the IP address is in local, private,
* non-routable, or multicast ranges. For more information about IP addresses for which you can't create health
* checks, see the following documents:
* </p>
* <ul>
* <li>
* <p>
* <a href="https://tools.ietf.org/html/rfc5735">RFC 5735, Special Use IPv4 Addresses</a>
* </p>
* </li>
* <li>
* <p>
* <a href="https://tools.ietf.org/html/rfc6598">RFC 6598, IANA-Reserved IPv4 Prefix for Shared Address Space</a>
* </p>
* </li>
* <li>
* <p>
* <a href="https://tools.ietf.org/html/rfc5156">RFC 5156, Special-Use IPv6 Addresses</a>
* </p>
* </li>
* </ul>
*
* @param iPAddress
* The IPv4 or IPv6 IP address for the endpoint that you want Amazon Route 53 to perform health checks on. If
* you don't specify a value for <code>IPAddress</code>, Amazon Route 53 sends a DNS request to resolve the
* domain name that you specify in <code>FullyQualifiedDomainName</code> at the interval that you specify in
* <code>RequestInterval</code>. Using an IP address that is returned by DNS, Amazon Route 53 then checks the
* health of the endpoint.</p>
* <p>
* Use one of the following formats for the value of <code>IPAddress</code>:
* </p>
* <ul>
* <li>
* <p>
* <b>IPv4 address</b>: four values between 0 and 255, separated by periods (.), for example,
* <code>192.0.2.44</code>.
* </p>
* </li>
* <li>
* <p>
* <b>IPv6 address</b>: eight groups of four hexadecimal values, separated by colons (:), for example,
* <code>2001:0db8:85a3:0000:0000:abcd:0001:2345</code>. You can also shorten IPv6 addresses as described in
* RFC 5952, for example, <code>2001:db8:85a3::abcd:1:2345</code>.
* </p>
* </li>
* </ul>
* <p>
* If the endpoint is an EC2 instance, we recommend that you create an Elastic IP address, associate it with
* your EC2 instance, and specify the Elastic IP address for <code>IPAddress</code>. This ensures that the IP
* address of your instance never changes. For more information, see the applicable documentation:
* </p>
* <ul>
* <li>
* <p>
* Linux: <a href="http://docs.aws.amazon.com/AWSEC2/latest/UserGuide/elastic-ip-addresses-eip.html">Elastic
* IP Addresses (EIP)</a> in the <i>Amazon EC2 User Guide for Linux Instances</i>
* </p>
* </li>
* <li>
* <p>
* Windows: <a
* href="http://docs.aws.amazon.com/AWSEC2/latest/WindowsGuide/elastic-ip-addresses-eip.html">Elastic IP
* Addresses (EIP)</a> in the <i>Amazon EC2 User Guide for Windows Instances</i>
* </p>
* </li>
* </ul>
* <note>
* <p>
* If a health check already has a value for <code>IPAddress</code>, you can change the value. However, you
* can't update an existing health check to add or remove the value of <code>IPAddress</code>.
* </p>
* </note>
* <p>
* For more information, see <a>UpdateHealthCheckRequest$FullyQualifiedDomainName</a>.
* </p>
* <p>
* Constraints: Amazon Route 53 can't check the health of endpoints for which the IP address is in local,
* private, non-routable, or multicast ranges. For more information about IP addresses for which you can't
* create health checks, see the following documents:
* </p>
* <ul>
* <li>
* <p>
* <a href="https://tools.ietf.org/html/rfc5735">RFC 5735, Special Use IPv4 Addresses</a>
* </p>
* </li>
* <li>
* <p>
* <a href="https://tools.ietf.org/html/rfc6598">RFC 6598, IANA-Reserved IPv4 Prefix for Shared Address
* Space</a>
* </p>
* </li>
* <li>
* <p>
* <a href="https://tools.ietf.org/html/rfc5156">RFC 5156, Special-Use IPv6 Addresses</a>
* </p>
* </li>
* @return Returns a reference to this object so that method calls can be chained together.
*/
public UpdateHealthCheckRequest withIPAddress(String iPAddress) {
setIPAddress(iPAddress);
return this;
}
/**
* <p>
* The port on the endpoint on which you want Amazon Route 53 to perform health checks.
* </p>
*
* @param port
* The port on the endpoint on which you want Amazon Route 53 to perform health checks.
*/
public void setPort(Integer port) {
this.port = port;
}
/**
* <p>
* The port on the endpoint on which you want Amazon Route 53 to perform health checks.
* </p>
*
* @return The port on the endpoint on which you want Amazon Route 53 to perform health checks.
*/
public Integer getPort() {
return this.port;
}
/**
* <p>
* The port on the endpoint on which you want Amazon Route 53 to perform health checks.
* </p>
*
* @param port
* The port on the endpoint on which you want Amazon Route 53 to perform health checks.
* @return Returns a reference to this object so that method calls can be chained together.
*/
public UpdateHealthCheckRequest withPort(Integer port) {
setPort(port);
return this;
}
/**
* <p>
* The path that you want Amazon Route 53 to request when performing health checks. The path can be any value for
* which your endpoint will return an HTTP status code of 2xx or 3xx when the endpoint is healthy, for example the
* file /docs/route53-health-check.html.
* </p>
* <p>
* Specify this value only if you want to change it.
* </p>
*
* @param resourcePath
* The path that you want Amazon Route 53 to request when performing health checks. The path can be any value
* for which your endpoint will return an HTTP status code of 2xx or 3xx when the endpoint is healthy, for
* example the file /docs/route53-health-check.html. </p>
* <p>
* Specify this value only if you want to change it.
*/
public void setResourcePath(String resourcePath) {
this.resourcePath = resourcePath;
}
/**
* <p>
* The path that you want Amazon Route 53 to request when performing health checks. The path can be any value for
* which your endpoint will return an HTTP status code of 2xx or 3xx when the endpoint is healthy, for example the
* file /docs/route53-health-check.html.
* </p>
* <p>
* Specify this value only if you want to change it.
* </p>
*
* @return The path that you want Amazon Route 53 to request when performing health checks. The path can be any
* value for which your endpoint will return an HTTP status code of 2xx or 3xx when the endpoint is healthy,
* for example the file /docs/route53-health-check.html. </p>
* <p>
* Specify this value only if you want to change it.
*/
public String getResourcePath() {
return this.resourcePath;
}
/**
* <p>
* The path that you want Amazon Route 53 to request when performing health checks. The path can be any value for
* which your endpoint will return an HTTP status code of 2xx or 3xx when the endpoint is healthy, for example the
* file /docs/route53-health-check.html.
* </p>
* <p>
* Specify this value only if you want to change it.
* </p>
*
* @param resourcePath
* The path that you want Amazon Route 53 to request when performing health checks. The path can be any value
* for which your endpoint will return an HTTP status code of 2xx or 3xx when the endpoint is healthy, for
* example the file /docs/route53-health-check.html. </p>
* <p>
* Specify this value only if you want to change it.
* @return Returns a reference to this object so that method calls can be chained together.
*/
public UpdateHealthCheckRequest withResourcePath(String resourcePath) {
setResourcePath(resourcePath);
return this;
}
/**
* <p>
* Amazon Route 53 behavior depends on whether you specify a value for <code>IPAddress</code>.
* </p>
* <note>
* <p>
* If a health check already has a value for <code>IPAddress</code>, you can change the value. However, you can't
* update an existing health check to add or remove the value of <code>IPAddress</code>.
* </p>
* </note>
* <p>
* <b>If you specify a value for</b> <code>IPAddress</code>:
* </p>
* <p>
* Amazon Route 53 sends health check requests to the specified IPv4 or IPv6 address and passes the value of
* <code>FullyQualifiedDomainName</code> in the <code>Host</code> header for all health checks except TCP health
* checks. This is typically the fully qualified DNS name of the endpoint on which you want Amazon Route 53 to
* perform health checks.
* </p>
* <p>
* When Amazon Route 53 checks the health of an endpoint, here is how it constructs the <code>Host</code> header:
* </p>
* <ul>
* <li>
* <p>
* If you specify a value of <code>80</code> for <code>Port</code> and <code>HTTP</code> or
* <code>HTTP_STR_MATCH</code> for <code>Type</code>, Amazon Route 53 passes the value of
* <code>FullyQualifiedDomainName</code> to the endpoint in the <code>Host</code> header.
* </p>
* </li>
* <li>
* <p>
* If you specify a value of <code>443</code> for <code>Port</code> and <code>HTTPS</code> or
* <code>HTTPS_STR_MATCH</code> for <code>Type</code>, Amazon Route 53 passes the value of
* <code>FullyQualifiedDomainName</code> to the endpoint in the <code>Host</code> header.
* </p>
* </li>
* <li>
* <p>
* If you specify another value for <code>Port</code> and any value except <code>TCP</code> for <code>Type</code>,
* Amazon Route 53 passes <i> <code>FullyQualifiedDomainName</code>:<code>Port</code> </i> to the endpoint in the
* <code>Host</code> header.
* </p>
* </li>
* </ul>
* <p>
* If you don't specify a value for <code>FullyQualifiedDomainName</code>, Amazon Route 53 substitutes the value of
* <code>IPAddress</code> in the <code>Host</code> header in each of the above cases.
* </p>
* <p>
* <b>If you don't specify a value for</b> <code>IPAddress</code>:
* </p>
* <p>
* If you don't specify a value for <code>IPAddress</code>, Amazon Route 53 sends a DNS request to the domain that
* you specify in <code>FullyQualifiedDomainName</code> at the interval you specify in <code>RequestInterval</code>.
* Using an IPv4 address that is returned by DNS, Amazon Route 53 then checks the health of the endpoint.
* </p>
* <note>
* <p>
* If you don't specify a value for <code>IPAddress</code>, Amazon Route 53 uses only IPv4 to send health checks to
* the endpoint. If there's no resource record set with a type of A for the name that you specify for
* <code>FullyQualifiedDomainName</code>, the health check fails with a "DNS resolution failed" error.
* </p>
* </note>
* <p>
* If you want to check the health of weighted, latency, or failover resource record sets and you choose to specify
* the endpoint only by <code>FullyQualifiedDomainName</code>, we recommend that you create a separate health check
* for each endpoint. For example, create a health check for each HTTP server that is serving content for
* www.example.com. For the value of <code>FullyQualifiedDomainName</code>, specify the domain name of the server
* (such as <code>us-east-2-www.example.com</code>), not the name of the resource record sets (www.example.com).
* </p>
* <important>
* <p>
* In this configuration, if the value of <code>FullyQualifiedDomainName</code> matches the name of the resource
* record sets and you then associate the health check with those resource record sets, health check results will be
* unpredictable.
* </p>
* </important>
* <p>
* In addition, if the value of <code>Type</code> is <code>HTTP</code>, <code>HTTPS</code>,
* <code>HTTP_STR_MATCH</code>, or <code>HTTPS_STR_MATCH</code>, Amazon Route 53 passes the value of
* <code>FullyQualifiedDomainName</code> in the <code>Host</code> header, as it does when you specify a value for
* <code>IPAddress</code>. If the value of <code>Type</code> is <code>TCP</code>, Amazon Route 53 doesn't pass a
* <code>Host</code> header.
* </p>
*
* @param fullyQualifiedDomainName
* Amazon Route 53 behavior depends on whether you specify a value for <code>IPAddress</code>.</p> <note>
* <p>
* If a health check already has a value for <code>IPAddress</code>, you can change the value. However, you
* can't update an existing health check to add or remove the value of <code>IPAddress</code>.
* </p>
* </note>
* <p>
* <b>If you specify a value for</b> <code>IPAddress</code>:
* </p>
* <p>
* Amazon Route 53 sends health check requests to the specified IPv4 or IPv6 address and passes the value of
* <code>FullyQualifiedDomainName</code> in the <code>Host</code> header for all health checks except TCP
* health checks. This is typically the fully qualified DNS name of the endpoint on which you want Amazon
* Route 53 to perform health checks.
* </p>
* <p>
* When Amazon Route 53 checks the health of an endpoint, here is how it constructs the <code>Host</code>
* header:
* </p>
* <ul>
* <li>
* <p>
* If you specify a value of <code>80</code> for <code>Port</code> and <code>HTTP</code> or
* <code>HTTP_STR_MATCH</code> for <code>Type</code>, Amazon Route 53 passes the value of
* <code>FullyQualifiedDomainName</code> to the endpoint in the <code>Host</code> header.
* </p>
* </li>
* <li>
* <p>
* If you specify a value of <code>443</code> for <code>Port</code> and <code>HTTPS</code> or
* <code>HTTPS_STR_MATCH</code> for <code>Type</code>, Amazon Route 53 passes the value of
* <code>FullyQualifiedDomainName</code> to the endpoint in the <code>Host</code> header.
* </p>
* </li>
* <li>
* <p>
* If you specify another value for <code>Port</code> and any value except <code>TCP</code> for
* <code>Type</code>, Amazon Route 53 passes <i> <code>FullyQualifiedDomainName</code>:<code>Port</code> </i>
* to the endpoint in the <code>Host</code> header.
* </p>
* </li>
* </ul>
* <p>
* If you don't specify a value for <code>FullyQualifiedDomainName</code>, Amazon Route 53 substitutes the
* value of <code>IPAddress</code> in the <code>Host</code> header in each of the above cases.
* </p>
* <p>
* <b>If you don't specify a value for</b> <code>IPAddress</code>:
* </p>
* <p>
* If you don't specify a value for <code>IPAddress</code>, Amazon Route 53 sends a DNS request to the domain
* that you specify in <code>FullyQualifiedDomainName</code> at the interval you specify in
* <code>RequestInterval</code>. Using an IPv4 address that is returned by DNS, Amazon Route 53 then checks
* the health of the endpoint.
* </p>
* <note>
* <p>
* If you don't specify a value for <code>IPAddress</code>, Amazon Route 53 uses only IPv4 to send health
* checks to the endpoint. If there's no resource record set with a type of A for the name that you specify
* for <code>FullyQualifiedDomainName</code>, the health check fails with a "DNS resolution failed" error.
* </p>
* </note>
* <p>
* If you want to check the health of weighted, latency, or failover resource record sets and you choose to
* specify the endpoint only by <code>FullyQualifiedDomainName</code>, we recommend that you create a
* separate health check for each endpoint. For example, create a health check for each HTTP server that is
* serving content for www.example.com. For the value of <code>FullyQualifiedDomainName</code>, specify the
* domain name of the server (such as <code>us-east-2-www.example.com</code>), not the name of the resource
* record sets (www.example.com).
* </p>
* <important>
* <p>
* In this configuration, if the value of <code>FullyQualifiedDomainName</code> matches the name of the
* resource record sets and you then associate the health check with those resource record sets, health check
* results will be unpredictable.
* </p>
* </important>
* <p>
* In addition, if the value of <code>Type</code> is <code>HTTP</code>, <code>HTTPS</code>,
* <code>HTTP_STR_MATCH</code>, or <code>HTTPS_STR_MATCH</code>, Amazon Route 53 passes the value of
* <code>FullyQualifiedDomainName</code> in the <code>Host</code> header, as it does when you specify a value
* for <code>IPAddress</code>. If the value of <code>Type</code> is <code>TCP</code>, Amazon Route 53 doesn't
* pass a <code>Host</code> header.
*/
public void setFullyQualifiedDomainName(String fullyQualifiedDomainName) {
this.fullyQualifiedDomainName = fullyQualifiedDomainName;
}
/**
* <p>
* Amazon Route 53 behavior depends on whether you specify a value for <code>IPAddress</code>.
* </p>
* <note>
* <p>
* If a health check already has a value for <code>IPAddress</code>, you can change the value. However, you can't
* update an existing health check to add or remove the value of <code>IPAddress</code>.
* </p>
* </note>
* <p>
* <b>If you specify a value for</b> <code>IPAddress</code>:
* </p>
* <p>
* Amazon Route 53 sends health check requests to the specified IPv4 or IPv6 address and passes the value of
* <code>FullyQualifiedDomainName</code> in the <code>Host</code> header for all health checks except TCP health
* checks. This is typically the fully qualified DNS name of the endpoint on which you want Amazon Route 53 to
* perform health checks.
* </p>
* <p>
* When Amazon Route 53 checks the health of an endpoint, here is how it constructs the <code>Host</code> header:
* </p>
* <ul>
* <li>
* <p>
* If you specify a value of <code>80</code> for <code>Port</code> and <code>HTTP</code> or
* <code>HTTP_STR_MATCH</code> for <code>Type</code>, Amazon Route 53 passes the value of
* <code>FullyQualifiedDomainName</code> to the endpoint in the <code>Host</code> header.
* </p>
* </li>
* <li>
* <p>
* If you specify a value of <code>443</code> for <code>Port</code> and <code>HTTPS</code> or
* <code>HTTPS_STR_MATCH</code> for <code>Type</code>, Amazon Route 53 passes the value of
* <code>FullyQualifiedDomainName</code> to the endpoint in the <code>Host</code> header.
* </p>
* </li>
* <li>
* <p>
* If you specify another value for <code>Port</code> and any value except <code>TCP</code> for <code>Type</code>,
* Amazon Route 53 passes <i> <code>FullyQualifiedDomainName</code>:<code>Port</code> </i> to the endpoint in the
* <code>Host</code> header.
* </p>
* </li>
* </ul>
* <p>
* If you don't specify a value for <code>FullyQualifiedDomainName</code>, Amazon Route 53 substitutes the value of
* <code>IPAddress</code> in the <code>Host</code> header in each of the above cases.
* </p>
* <p>
* <b>If you don't specify a value for</b> <code>IPAddress</code>:
* </p>
* <p>
* If you don't specify a value for <code>IPAddress</code>, Amazon Route 53 sends a DNS request to the domain that
* you specify in <code>FullyQualifiedDomainName</code> at the interval you specify in <code>RequestInterval</code>.
* Using an IPv4 address that is returned by DNS, Amazon Route 53 then checks the health of the endpoint.
* </p>
* <note>
* <p>
* If you don't specify a value for <code>IPAddress</code>, Amazon Route 53 uses only IPv4 to send health checks to
* the endpoint. If there's no resource record set with a type of A for the name that you specify for
* <code>FullyQualifiedDomainName</code>, the health check fails with a "DNS resolution failed" error.
* </p>
* </note>
* <p>
* If you want to check the health of weighted, latency, or failover resource record sets and you choose to specify
* the endpoint only by <code>FullyQualifiedDomainName</code>, we recommend that you create a separate health check
* for each endpoint. For example, create a health check for each HTTP server that is serving content for
* www.example.com. For the value of <code>FullyQualifiedDomainName</code>, specify the domain name of the server
* (such as <code>us-east-2-www.example.com</code>), not the name of the resource record sets (www.example.com).
* </p>
* <important>
* <p>
* In this configuration, if the value of <code>FullyQualifiedDomainName</code> matches the name of the resource
* record sets and you then associate the health check with those resource record sets, health check results will be
* unpredictable.
* </p>
* </important>
* <p>
* In addition, if the value of <code>Type</code> is <code>HTTP</code>, <code>HTTPS</code>,
* <code>HTTP_STR_MATCH</code>, or <code>HTTPS_STR_MATCH</code>, Amazon Route 53 passes the value of
* <code>FullyQualifiedDomainName</code> in the <code>Host</code> header, as it does when you specify a value for
* <code>IPAddress</code>. If the value of <code>Type</code> is <code>TCP</code>, Amazon Route 53 doesn't pass a
* <code>Host</code> header.
* </p>
*
* @return Amazon Route 53 behavior depends on whether you specify a value for <code>IPAddress</code>.</p> <note>
* <p>
* If a health check already has a value for <code>IPAddress</code>, you can change the value. However, you
* can't update an existing health check to add or remove the value of <code>IPAddress</code>.
* </p>
* </note>
* <p>
* <b>If you specify a value for</b> <code>IPAddress</code>:
* </p>
* <p>
* Amazon Route 53 sends health check requests to the specified IPv4 or IPv6 address and passes the value of
* <code>FullyQualifiedDomainName</code> in the <code>Host</code> header for all health checks except TCP
* health checks. This is typically the fully qualified DNS name of the endpoint on which you want Amazon
* Route 53 to perform health checks.
* </p>
* <p>
* When Amazon Route 53 checks the health of an endpoint, here is how it constructs the <code>Host</code>
* header:
* </p>
* <ul>
* <li>
* <p>
* If you specify a value of <code>80</code> for <code>Port</code> and <code>HTTP</code> or
* <code>HTTP_STR_MATCH</code> for <code>Type</code>, Amazon Route 53 passes the value of
* <code>FullyQualifiedDomainName</code> to the endpoint in the <code>Host</code> header.
* </p>
* </li>
* <li>
* <p>
* If you specify a value of <code>443</code> for <code>Port</code> and <code>HTTPS</code> or
* <code>HTTPS_STR_MATCH</code> for <code>Type</code>, Amazon Route 53 passes the value of
* <code>FullyQualifiedDomainName</code> to the endpoint in the <code>Host</code> header.
* </p>
* </li>
* <li>
* <p>
* If you specify another value for <code>Port</code> and any value except <code>TCP</code> for
* <code>Type</code>, Amazon Route 53 passes <i> <code>FullyQualifiedDomainName</code>:<code>Port</code>
* </i> to the endpoint in the <code>Host</code> header.
* </p>
* </li>
* </ul>
* <p>
* If you don't specify a value for <code>FullyQualifiedDomainName</code>, Amazon Route 53 substitutes the
* value of <code>IPAddress</code> in the <code>Host</code> header in each of the above cases.
* </p>
* <p>
* <b>If you don't specify a value for</b> <code>IPAddress</code>:
* </p>
* <p>
* If you don't specify a value for <code>IPAddress</code>, Amazon Route 53 sends a DNS request to the
* domain that you specify in <code>FullyQualifiedDomainName</code> at the interval you specify in
* <code>RequestInterval</code>. Using an IPv4 address that is returned by DNS, Amazon Route 53 then checks
* the health of the endpoint.
* </p>
* <note>
* <p>
* If you don't specify a value for <code>IPAddress</code>, Amazon Route 53 uses only IPv4 to send health
* checks to the endpoint. If there's no resource record set with a type of A for the name that you specify
* for <code>FullyQualifiedDomainName</code>, the health check fails with a "DNS resolution failed" error.
* </p>
* </note>
* <p>
* If you want to check the health of weighted, latency, or failover resource record sets and you choose to
* specify the endpoint only by <code>FullyQualifiedDomainName</code>, we recommend that you create a
* separate health check for each endpoint. For example, create a health check for each HTTP server that is
* serving content for www.example.com. For the value of <code>FullyQualifiedDomainName</code>, specify the
* domain name of the server (such as <code>us-east-2-www.example.com</code>), not the name of the resource
* record sets (www.example.com).
* </p>
* <important>
* <p>
* In this configuration, if the value of <code>FullyQualifiedDomainName</code> matches the name of the
* resource record sets and you then associate the health check with those resource record sets, health
* check results will be unpredictable.
* </p>
* </important>
* <p>
* In addition, if the value of <code>Type</code> is <code>HTTP</code>, <code>HTTPS</code>,
* <code>HTTP_STR_MATCH</code>, or <code>HTTPS_STR_MATCH</code>, Amazon Route 53 passes the value of
* <code>FullyQualifiedDomainName</code> in the <code>Host</code> header, as it does when you specify a
* value for <code>IPAddress</code>. If the value of <code>Type</code> is <code>TCP</code>, Amazon Route 53
* doesn't pass a <code>Host</code> header.
*/
public String getFullyQualifiedDomainName() {
return this.fullyQualifiedDomainName;
}
/**
* <p>
* Amazon Route 53 behavior depends on whether you specify a value for <code>IPAddress</code>.
* </p>
* <note>
* <p>
* If a health check already has a value for <code>IPAddress</code>, you can change the value. However, you can't
* update an existing health check to add or remove the value of <code>IPAddress</code>.
* </p>
* </note>
* <p>
* <b>If you specify a value for</b> <code>IPAddress</code>:
* </p>
* <p>
* Amazon Route 53 sends health check requests to the specified IPv4 or IPv6 address and passes the value of
* <code>FullyQualifiedDomainName</code> in the <code>Host</code> header for all health checks except TCP health
* checks. This is typically the fully qualified DNS name of the endpoint on which you want Amazon Route 53 to
* perform health checks.
* </p>
* <p>
* When Amazon Route 53 checks the health of an endpoint, here is how it constructs the <code>Host</code> header:
* </p>
* <ul>
* <li>
* <p>
* If you specify a value of <code>80</code> for <code>Port</code> and <code>HTTP</code> or
* <code>HTTP_STR_MATCH</code> for <code>Type</code>, Amazon Route 53 passes the value of
* <code>FullyQualifiedDomainName</code> to the endpoint in the <code>Host</code> header.
* </p>
* </li>
* <li>
* <p>
* If you specify a value of <code>443</code> for <code>Port</code> and <code>HTTPS</code> or
* <code>HTTPS_STR_MATCH</code> for <code>Type</code>, Amazon Route 53 passes the value of
* <code>FullyQualifiedDomainName</code> to the endpoint in the <code>Host</code> header.
* </p>
* </li>
* <li>
* <p>
* If you specify another value for <code>Port</code> and any value except <code>TCP</code> for <code>Type</code>,
* Amazon Route 53 passes <i> <code>FullyQualifiedDomainName</code>:<code>Port</code> </i> to the endpoint in the
* <code>Host</code> header.
* </p>
* </li>
* </ul>
* <p>
* If you don't specify a value for <code>FullyQualifiedDomainName</code>, Amazon Route 53 substitutes the value of
* <code>IPAddress</code> in the <code>Host</code> header in each of the above cases.
* </p>
* <p>
* <b>If you don't specify a value for</b> <code>IPAddress</code>:
* </p>
* <p>
* If you don't specify a value for <code>IPAddress</code>, Amazon Route 53 sends a DNS request to the domain that
* you specify in <code>FullyQualifiedDomainName</code> at the interval you specify in <code>RequestInterval</code>.
* Using an IPv4 address that is returned by DNS, Amazon Route 53 then checks the health of the endpoint.
* </p>
* <note>
* <p>
* If you don't specify a value for <code>IPAddress</code>, Amazon Route 53 uses only IPv4 to send health checks to
* the endpoint. If there's no resource record set with a type of A for the name that you specify for
* <code>FullyQualifiedDomainName</code>, the health check fails with a "DNS resolution failed" error.
* </p>
* </note>
* <p>
* If you want to check the health of weighted, latency, or failover resource record sets and you choose to specify
* the endpoint only by <code>FullyQualifiedDomainName</code>, we recommend that you create a separate health check
* for each endpoint. For example, create a health check for each HTTP server that is serving content for
* www.example.com. For the value of <code>FullyQualifiedDomainName</code>, specify the domain name of the server
* (such as <code>us-east-2-www.example.com</code>), not the name of the resource record sets (www.example.com).
* </p>
* <important>
* <p>
* In this configuration, if the value of <code>FullyQualifiedDomainName</code> matches the name of the resource
* record sets and you then associate the health check with those resource record sets, health check results will be
* unpredictable.
* </p>
* </important>
* <p>
* In addition, if the value of <code>Type</code> is <code>HTTP</code>, <code>HTTPS</code>,
* <code>HTTP_STR_MATCH</code>, or <code>HTTPS_STR_MATCH</code>, Amazon Route 53 passes the value of
* <code>FullyQualifiedDomainName</code> in the <code>Host</code> header, as it does when you specify a value for
* <code>IPAddress</code>. If the value of <code>Type</code> is <code>TCP</code>, Amazon Route 53 doesn't pass a
* <code>Host</code> header.
* </p>
*
* @param fullyQualifiedDomainName
* Amazon Route 53 behavior depends on whether you specify a value for <code>IPAddress</code>.</p> <note>
* <p>
* If a health check already has a value for <code>IPAddress</code>, you can change the value. However, you
* can't update an existing health check to add or remove the value of <code>IPAddress</code>.
* </p>
* </note>
* <p>
* <b>If you specify a value for</b> <code>IPAddress</code>:
* </p>
* <p>
* Amazon Route 53 sends health check requests to the specified IPv4 or IPv6 address and passes the value of
* <code>FullyQualifiedDomainName</code> in the <code>Host</code> header for all health checks except TCP
* health checks. This is typically the fully qualified DNS name of the endpoint on which you want Amazon
* Route 53 to perform health checks.
* </p>
* <p>
* When Amazon Route 53 checks the health of an endpoint, here is how it constructs the <code>Host</code>
* header:
* </p>
* <ul>
* <li>
* <p>
* If you specify a value of <code>80</code> for <code>Port</code> and <code>HTTP</code> or
* <code>HTTP_STR_MATCH</code> for <code>Type</code>, Amazon Route 53 passes the value of
* <code>FullyQualifiedDomainName</code> to the endpoint in the <code>Host</code> header.
* </p>
* </li>
* <li>
* <p>
* If you specify a value of <code>443</code> for <code>Port</code> and <code>HTTPS</code> or
* <code>HTTPS_STR_MATCH</code> for <code>Type</code>, Amazon Route 53 passes the value of
* <code>FullyQualifiedDomainName</code> to the endpoint in the <code>Host</code> header.
* </p>
* </li>
* <li>
* <p>
* If you specify another value for <code>Port</code> and any value except <code>TCP</code> for
* <code>Type</code>, Amazon Route 53 passes <i> <code>FullyQualifiedDomainName</code>:<code>Port</code> </i>
* to the endpoint in the <code>Host</code> header.
* </p>
* </li>
* </ul>
* <p>
* If you don't specify a value for <code>FullyQualifiedDomainName</code>, Amazon Route 53 substitutes the
* value of <code>IPAddress</code> in the <code>Host</code> header in each of the above cases.
* </p>
* <p>
* <b>If you don't specify a value for</b> <code>IPAddress</code>:
* </p>
* <p>
* If you don't specify a value for <code>IPAddress</code>, Amazon Route 53 sends a DNS request to the domain
* that you specify in <code>FullyQualifiedDomainName</code> at the interval you specify in
* <code>RequestInterval</code>. Using an IPv4 address that is returned by DNS, Amazon Route 53 then checks
* the health of the endpoint.
* </p>
* <note>
* <p>
* If you don't specify a value for <code>IPAddress</code>, Amazon Route 53 uses only IPv4 to send health
* checks to the endpoint. If there's no resource record set with a type of A for the name that you specify
* for <code>FullyQualifiedDomainName</code>, the health check fails with a "DNS resolution failed" error.
* </p>
* </note>
* <p>
* If you want to check the health of weighted, latency, or failover resource record sets and you choose to
* specify the endpoint only by <code>FullyQualifiedDomainName</code>, we recommend that you create a
* separate health check for each endpoint. For example, create a health check for each HTTP server that is
* serving content for www.example.com. For the value of <code>FullyQualifiedDomainName</code>, specify the
* domain name of the server (such as <code>us-east-2-www.example.com</code>), not the name of the resource
* record sets (www.example.com).
* </p>
* <important>
* <p>
* In this configuration, if the value of <code>FullyQualifiedDomainName</code> matches the name of the
* resource record sets and you then associate the health check with those resource record sets, health check
* results will be unpredictable.
* </p>
* </important>
* <p>
* In addition, if the value of <code>Type</code> is <code>HTTP</code>, <code>HTTPS</code>,
* <code>HTTP_STR_MATCH</code>, or <code>HTTPS_STR_MATCH</code>, Amazon Route 53 passes the value of
* <code>FullyQualifiedDomainName</code> in the <code>Host</code> header, as it does when you specify a value
* for <code>IPAddress</code>. If the value of <code>Type</code> is <code>TCP</code>, Amazon Route 53 doesn't
* pass a <code>Host</code> header.
* @return Returns a reference to this object so that method calls can be chained together.
*/
public UpdateHealthCheckRequest withFullyQualifiedDomainName(String fullyQualifiedDomainName) {
setFullyQualifiedDomainName(fullyQualifiedDomainName);
return this;
}
/**
* <p>
* If the value of <code>Type</code> is <code>HTTP_STR_MATCH</code> or <code>HTTP_STR_MATCH</code>, the string that
* you want Amazon Route 53 to search for in the response body from the specified resource. If the string appears in
* the response body, Amazon Route 53 considers the resource healthy. (You can't change the value of
* <code>Type</code> when you update a health check.)
* </p>
*
* @param searchString
* If the value of <code>Type</code> is <code>HTTP_STR_MATCH</code> or <code>HTTP_STR_MATCH</code>, the
* string that you want Amazon Route 53 to search for in the response body from the specified resource. If
* the string appears in the response body, Amazon Route 53 considers the resource healthy. (You can't change
* the value of <code>Type</code> when you update a health check.)
*/
public void setSearchString(String searchString) {
this.searchString = searchString;
}
/**
* <p>
* If the value of <code>Type</code> is <code>HTTP_STR_MATCH</code> or <code>HTTP_STR_MATCH</code>, the string that
* you want Amazon Route 53 to search for in the response body from the specified resource. If the string appears in
* the response body, Amazon Route 53 considers the resource healthy. (You can't change the value of
* <code>Type</code> when you update a health check.)
* </p>
*
* @return If the value of <code>Type</code> is <code>HTTP_STR_MATCH</code> or <code>HTTP_STR_MATCH</code>, the
* string that you want Amazon Route 53 to search for in the response body from the specified resource. If
* the string appears in the response body, Amazon Route 53 considers the resource healthy. (You can't
* change the value of <code>Type</code> when you update a health check.)
*/
public String getSearchString() {
return this.searchString;
}
/**
* <p>
* If the value of <code>Type</code> is <code>HTTP_STR_MATCH</code> or <code>HTTP_STR_MATCH</code>, the string that
* you want Amazon Route 53 to search for in the response body from the specified resource. If the string appears in
* the response body, Amazon Route 53 considers the resource healthy. (You can't change the value of
* <code>Type</code> when you update a health check.)
* </p>
*
* @param searchString
* If the value of <code>Type</code> is <code>HTTP_STR_MATCH</code> or <code>HTTP_STR_MATCH</code>, the
* string that you want Amazon Route 53 to search for in the response body from the specified resource. If
* the string appears in the response body, Amazon Route 53 considers the resource healthy. (You can't change
* the value of <code>Type</code> when you update a health check.)
* @return Returns a reference to this object so that method calls can be chained together.
*/
public UpdateHealthCheckRequest withSearchString(String searchString) {
setSearchString(searchString);
return this;
}
/**
* <p>
* The number of consecutive health checks that an endpoint must pass or fail for Amazon Route 53 to change the
* current status of the endpoint from unhealthy to healthy or vice versa. For more information, see <a href=
* "http://docs.aws.amazon.com/Route53/latest/DeveloperGuide/dns-failover-determining-health-of-endpoints.html">How
* Amazon Route 53 Determines Whether an Endpoint Is Healthy</a> in the <i>Amazon Route 53 Developer Guide</i>.
* </p>
* <p>
* If you don't specify a value for <code>FailureThreshold</code>, the default value is three health checks.
* </p>
*
* @param failureThreshold
* The number of consecutive health checks that an endpoint must pass or fail for Amazon Route 53 to change
* the current status of the endpoint from unhealthy to healthy or vice versa. For more information, see <a
* href=
* "http://docs.aws.amazon.com/Route53/latest/DeveloperGuide/dns-failover-determining-health-of-endpoints.html"
* >How Amazon Route 53 Determines Whether an Endpoint Is Healthy</a> in the <i>Amazon Route 53 Developer
* Guide</i>.</p>
* <p>
* If you don't specify a value for <code>FailureThreshold</code>, the default value is three health checks.
*/
public void setFailureThreshold(Integer failureThreshold) {
this.failureThreshold = failureThreshold;
}
/**
* <p>
* The number of consecutive health checks that an endpoint must pass or fail for Amazon Route 53 to change the
* current status of the endpoint from unhealthy to healthy or vice versa. For more information, see <a href=
* "http://docs.aws.amazon.com/Route53/latest/DeveloperGuide/dns-failover-determining-health-of-endpoints.html">How
* Amazon Route 53 Determines Whether an Endpoint Is Healthy</a> in the <i>Amazon Route 53 Developer Guide</i>.
* </p>
* <p>
* If you don't specify a value for <code>FailureThreshold</code>, the default value is three health checks.
* </p>
*
* @return The number of consecutive health checks that an endpoint must pass or fail for Amazon Route 53 to change
* the current status of the endpoint from unhealthy to healthy or vice versa. For more information, see <a
* href=
* "http://docs.aws.amazon.com/Route53/latest/DeveloperGuide/dns-failover-determining-health-of-endpoints.html"
* >How Amazon Route 53 Determines Whether an Endpoint Is Healthy</a> in the <i>Amazon Route 53 Developer
* Guide</i>.</p>
* <p>
* If you don't specify a value for <code>FailureThreshold</code>, the default value is three health checks.
*/
public Integer getFailureThreshold() {
return this.failureThreshold;
}
/**
* <p>
* The number of consecutive health checks that an endpoint must pass or fail for Amazon Route 53 to change the
* current status of the endpoint from unhealthy to healthy or vice versa. For more information, see <a href=
* "http://docs.aws.amazon.com/Route53/latest/DeveloperGuide/dns-failover-determining-health-of-endpoints.html">How
* Amazon Route 53 Determines Whether an Endpoint Is Healthy</a> in the <i>Amazon Route 53 Developer Guide</i>.
* </p>
* <p>
* If you don't specify a value for <code>FailureThreshold</code>, the default value is three health checks.
* </p>
*
* @param failureThreshold
* The number of consecutive health checks that an endpoint must pass or fail for Amazon Route 53 to change
* the current status of the endpoint from unhealthy to healthy or vice versa. For more information, see <a
* href=
* "http://docs.aws.amazon.com/Route53/latest/DeveloperGuide/dns-failover-determining-health-of-endpoints.html"
* >How Amazon Route 53 Determines Whether an Endpoint Is Healthy</a> in the <i>Amazon Route 53 Developer
* Guide</i>.</p>
* <p>
* If you don't specify a value for <code>FailureThreshold</code>, the default value is three health checks.
* @return Returns a reference to this object so that method calls can be chained together.
*/
public UpdateHealthCheckRequest withFailureThreshold(Integer failureThreshold) {
setFailureThreshold(failureThreshold);
return this;
}
/**
* <p>
* Specify whether you want Amazon Route 53 to invert the status of a health check, for example, to consider a
* health check unhealthy when it otherwise would be considered healthy.
* </p>
*
* @param inverted
* Specify whether you want Amazon Route 53 to invert the status of a health check, for example, to consider
* a health check unhealthy when it otherwise would be considered healthy.
*/
public void setInverted(Boolean inverted) {
this.inverted = inverted;
}
/**
* <p>
* Specify whether you want Amazon Route 53 to invert the status of a health check, for example, to consider a
* health check unhealthy when it otherwise would be considered healthy.
* </p>
*
* @return Specify whether you want Amazon Route 53 to invert the status of a health check, for example, to consider
* a health check unhealthy when it otherwise would be considered healthy.
*/
public Boolean getInverted() {
return this.inverted;
}
/**
* <p>
* Specify whether you want Amazon Route 53 to invert the status of a health check, for example, to consider a
* health check unhealthy when it otherwise would be considered healthy.
* </p>
*
* @param inverted
* Specify whether you want Amazon Route 53 to invert the status of a health check, for example, to consider
* a health check unhealthy when it otherwise would be considered healthy.
* @return Returns a reference to this object so that method calls can be chained together.
*/
public UpdateHealthCheckRequest withInverted(Boolean inverted) {
setInverted(inverted);
return this;
}
/**
* <p>
* Specify whether you want Amazon Route 53 to invert the status of a health check, for example, to consider a
* health check unhealthy when it otherwise would be considered healthy.
* </p>
*
* @return Specify whether you want Amazon Route 53 to invert the status of a health check, for example, to consider
* a health check unhealthy when it otherwise would be considered healthy.
*/
public Boolean isInverted() {
return this.inverted;
}
/**
* <p>
* The number of child health checks that are associated with a <code>CALCULATED</code> health that Amazon Route 53
* must consider healthy for the <code>CALCULATED</code> health check to be considered healthy. To specify the child
* health checks that you want to associate with a <code>CALCULATED</code> health check, use the
* <code>ChildHealthChecks</code> and <code>ChildHealthCheck</code> elements.
* </p>
* <p>
* Note the following:
* </p>
* <ul>
* <li>
* <p>
* If you specify a number greater than the number of child health checks, Amazon Route 53 always considers this
* health check to be unhealthy.
* </p>
* </li>
* <li>
* <p>
* If you specify <code>0</code>, Amazon Route 53 always considers this health check to be healthy.
* </p>
* </li>
* </ul>
*
* @param healthThreshold
* The number of child health checks that are associated with a <code>CALCULATED</code> health that Amazon
* Route 53 must consider healthy for the <code>CALCULATED</code> health check to be considered healthy. To
* specify the child health checks that you want to associate with a <code>CALCULATED</code> health check,
* use the <code>ChildHealthChecks</code> and <code>ChildHealthCheck</code> elements.</p>
* <p>
* Note the following:
* </p>
* <ul>
* <li>
* <p>
* If you specify a number greater than the number of child health checks, Amazon Route 53 always considers
* this health check to be unhealthy.
* </p>
* </li>
* <li>
* <p>
* If you specify <code>0</code>, Amazon Route 53 always considers this health check to be healthy.
* </p>
* </li>
*/
public void setHealthThreshold(Integer healthThreshold) {
this.healthThreshold = healthThreshold;
}
/**
* <p>
* The number of child health checks that are associated with a <code>CALCULATED</code> health that Amazon Route 53
* must consider healthy for the <code>CALCULATED</code> health check to be considered healthy. To specify the child
* health checks that you want to associate with a <code>CALCULATED</code> health check, use the
* <code>ChildHealthChecks</code> and <code>ChildHealthCheck</code> elements.
* </p>
* <p>
* Note the following:
* </p>
* <ul>
* <li>
* <p>
* If you specify a number greater than the number of child health checks, Amazon Route 53 always considers this
* health check to be unhealthy.
* </p>
* </li>
* <li>
* <p>
* If you specify <code>0</code>, Amazon Route 53 always considers this health check to be healthy.
* </p>
* </li>
* </ul>
*
* @return The number of child health checks that are associated with a <code>CALCULATED</code> health that Amazon
* Route 53 must consider healthy for the <code>CALCULATED</code> health check to be considered healthy. To
* specify the child health checks that you want to associate with a <code>CALCULATED</code> health check,
* use the <code>ChildHealthChecks</code> and <code>ChildHealthCheck</code> elements.</p>
* <p>
* Note the following:
* </p>
* <ul>
* <li>
* <p>
* If you specify a number greater than the number of child health checks, Amazon Route 53 always considers
* this health check to be unhealthy.
* </p>
* </li>
* <li>
* <p>
* If you specify <code>0</code>, Amazon Route 53 always considers this health check to be healthy.
* </p>
* </li>
*/
public Integer getHealthThreshold() {
return this.healthThreshold;
}
/**
* <p>
* The number of child health checks that are associated with a <code>CALCULATED</code> health that Amazon Route 53
* must consider healthy for the <code>CALCULATED</code> health check to be considered healthy. To specify the child
* health checks that you want to associate with a <code>CALCULATED</code> health check, use the
* <code>ChildHealthChecks</code> and <code>ChildHealthCheck</code> elements.
* </p>
* <p>
* Note the following:
* </p>
* <ul>
* <li>
* <p>
* If you specify a number greater than the number of child health checks, Amazon Route 53 always considers this
* health check to be unhealthy.
* </p>
* </li>
* <li>
* <p>
* If you specify <code>0</code>, Amazon Route 53 always considers this health check to be healthy.
* </p>
* </li>
* </ul>
*
* @param healthThreshold
* The number of child health checks that are associated with a <code>CALCULATED</code> health that Amazon
* Route 53 must consider healthy for the <code>CALCULATED</code> health check to be considered healthy. To
* specify the child health checks that you want to associate with a <code>CALCULATED</code> health check,
* use the <code>ChildHealthChecks</code> and <code>ChildHealthCheck</code> elements.</p>
* <p>
* Note the following:
* </p>
* <ul>
* <li>
* <p>
* If you specify a number greater than the number of child health checks, Amazon Route 53 always considers
* this health check to be unhealthy.
* </p>
* </li>
* <li>
* <p>
* If you specify <code>0</code>, Amazon Route 53 always considers this health check to be healthy.
* </p>
* </li>
* @return Returns a reference to this object so that method calls can be chained together.
*/
public UpdateHealthCheckRequest withHealthThreshold(Integer healthThreshold) {
setHealthThreshold(healthThreshold);
return this;
}
/**
* <p>
* A complex type that contains one <code>ChildHealthCheck</code> element for each health check that you want to
* associate with a <code>CALCULATED</code> health check.
* </p>
*
* @return A complex type that contains one <code>ChildHealthCheck</code> element for each health check that you
* want to associate with a <code>CALCULATED</code> health check.
*/
public java.util.List<String> getChildHealthChecks() {
if (childHealthChecks == null) {
childHealthChecks = new com.amazonaws.internal.SdkInternalList<String>();
}
return childHealthChecks;
}
/**
* <p>
* A complex type that contains one <code>ChildHealthCheck</code> element for each health check that you want to
* associate with a <code>CALCULATED</code> health check.
* </p>
*
* @param childHealthChecks
* A complex type that contains one <code>ChildHealthCheck</code> element for each health check that you want
* to associate with a <code>CALCULATED</code> health check.
*/
public void setChildHealthChecks(java.util.Collection<String> childHealthChecks) {
if (childHealthChecks == null) {
this.childHealthChecks = null;
return;
}
this.childHealthChecks = new com.amazonaws.internal.SdkInternalList<String>(childHealthChecks);
}
/**
* <p>
* A complex type that contains one <code>ChildHealthCheck</code> element for each health check that you want to
* associate with a <code>CALCULATED</code> health check.
* </p>
* <p>
* <b>NOTE:</b> This method appends the values to the existing list (if any). Use
* {@link #setChildHealthChecks(java.util.Collection)} or {@link #withChildHealthChecks(java.util.Collection)} if
* you want to override the existing values.
* </p>
*
* @param childHealthChecks
* A complex type that contains one <code>ChildHealthCheck</code> element for each health check that you want
* to associate with a <code>CALCULATED</code> health check.
* @return Returns a reference to this object so that method calls can be chained together.
*/
public UpdateHealthCheckRequest withChildHealthChecks(String... childHealthChecks) {
if (this.childHealthChecks == null) {
setChildHealthChecks(new com.amazonaws.internal.SdkInternalList<String>(childHealthChecks.length));
}
for (String ele : childHealthChecks) {
this.childHealthChecks.add(ele);
}
return this;
}
/**
* <p>
* A complex type that contains one <code>ChildHealthCheck</code> element for each health check that you want to
* associate with a <code>CALCULATED</code> health check.
* </p>
*
* @param childHealthChecks
* A complex type that contains one <code>ChildHealthCheck</code> element for each health check that you want
* to associate with a <code>CALCULATED</code> health check.
* @return Returns a reference to this object so that method calls can be chained together.
*/
public UpdateHealthCheckRequest withChildHealthChecks(java.util.Collection<String> childHealthChecks) {
setChildHealthChecks(childHealthChecks);
return this;
}
/**
* <p>
* Specify whether you want Amazon Route 53 to send the value of <code>FullyQualifiedDomainName</code> to the
* endpoint in the <code>client_hello</code> message during <code>TLS</code> negotiation. This allows the endpoint
* to respond to <code>HTTPS</code> health check requests with the applicable SSL/TLS certificate.
* </p>
* <p>
* Some endpoints require that HTTPS requests include the host name in the <code>client_hello</code> message. If you
* don't enable SNI, the status of the health check will be SSL alert <code>handshake_failure</code>. A health check
* can also have that status for other reasons. If SNI is enabled and you're still getting the error, check the
* SSL/TLS configuration on your endpoint and confirm that your certificate is valid.
* </p>
* <p>
* The SSL/TLS certificate on your endpoint includes a domain name in the <code>Common Name</code> field and
* possibly several more in the <code>Subject Alternative Names</code> field. One of the domain names in the
* certificate should match the value that you specify for <code>FullyQualifiedDomainName</code>. If the endpoint
* responds to the <code>client_hello</code> message with a certificate that does not include the domain name that
* you specified in <code>FullyQualifiedDomainName</code>, a health checker will retry the handshake. In the second
* attempt, the health checker will omit <code>FullyQualifiedDomainName</code> from the <code>client_hello</code>
* message.
* </p>
*
* @param enableSNI
* Specify whether you want Amazon Route 53 to send the value of <code>FullyQualifiedDomainName</code> to the
* endpoint in the <code>client_hello</code> message during <code>TLS</code> negotiation. This allows the
* endpoint to respond to <code>HTTPS</code> health check requests with the applicable SSL/TLS
* certificate.</p>
* <p>
* Some endpoints require that HTTPS requests include the host name in the <code>client_hello</code> message.
* If you don't enable SNI, the status of the health check will be SSL alert <code>handshake_failure</code>.
* A health check can also have that status for other reasons. If SNI is enabled and you're still getting the
* error, check the SSL/TLS configuration on your endpoint and confirm that your certificate is valid.
* </p>
* <p>
* The SSL/TLS certificate on your endpoint includes a domain name in the <code>Common Name</code> field and
* possibly several more in the <code>Subject Alternative Names</code> field. One of the domain names in the
* certificate should match the value that you specify for <code>FullyQualifiedDomainName</code>. If the
* endpoint responds to the <code>client_hello</code> message with a certificate that does not include the
* domain name that you specified in <code>FullyQualifiedDomainName</code>, a health checker will retry the
* handshake. In the second attempt, the health checker will omit <code>FullyQualifiedDomainName</code> from
* the <code>client_hello</code> message.
*/
public void setEnableSNI(Boolean enableSNI) {
this.enableSNI = enableSNI;
}
/**
* <p>
* Specify whether you want Amazon Route 53 to send the value of <code>FullyQualifiedDomainName</code> to the
* endpoint in the <code>client_hello</code> message during <code>TLS</code> negotiation. This allows the endpoint
* to respond to <code>HTTPS</code> health check requests with the applicable SSL/TLS certificate.
* </p>
* <p>
* Some endpoints require that HTTPS requests include the host name in the <code>client_hello</code> message. If you
* don't enable SNI, the status of the health check will be SSL alert <code>handshake_failure</code>. A health check
* can also have that status for other reasons. If SNI is enabled and you're still getting the error, check the
* SSL/TLS configuration on your endpoint and confirm that your certificate is valid.
* </p>
* <p>
* The SSL/TLS certificate on your endpoint includes a domain name in the <code>Common Name</code> field and
* possibly several more in the <code>Subject Alternative Names</code> field. One of the domain names in the
* certificate should match the value that you specify for <code>FullyQualifiedDomainName</code>. If the endpoint
* responds to the <code>client_hello</code> message with a certificate that does not include the domain name that
* you specified in <code>FullyQualifiedDomainName</code>, a health checker will retry the handshake. In the second
* attempt, the health checker will omit <code>FullyQualifiedDomainName</code> from the <code>client_hello</code>
* message.
* </p>
*
* @return Specify whether you want Amazon Route 53 to send the value of <code>FullyQualifiedDomainName</code> to
* the endpoint in the <code>client_hello</code> message during <code>TLS</code> negotiation. This allows
* the endpoint to respond to <code>HTTPS</code> health check requests with the applicable SSL/TLS
* certificate.</p>
* <p>
* Some endpoints require that HTTPS requests include the host name in the <code>client_hello</code>
* message. If you don't enable SNI, the status of the health check will be SSL alert
* <code>handshake_failure</code>. A health check can also have that status for other reasons. If SNI is
* enabled and you're still getting the error, check the SSL/TLS configuration on your endpoint and confirm
* that your certificate is valid.
* </p>
* <p>
* The SSL/TLS certificate on your endpoint includes a domain name in the <code>Common Name</code> field and
* possibly several more in the <code>Subject Alternative Names</code> field. One of the domain names in the
* certificate should match the value that you specify for <code>FullyQualifiedDomainName</code>. If the
* endpoint responds to the <code>client_hello</code> message with a certificate that does not include the
* domain name that you specified in <code>FullyQualifiedDomainName</code>, a health checker will retry the
* handshake. In the second attempt, the health checker will omit <code>FullyQualifiedDomainName</code> from
* the <code>client_hello</code> message.
*/
public Boolean getEnableSNI() {
return this.enableSNI;
}
/**
* <p>
* Specify whether you want Amazon Route 53 to send the value of <code>FullyQualifiedDomainName</code> to the
* endpoint in the <code>client_hello</code> message during <code>TLS</code> negotiation. This allows the endpoint
* to respond to <code>HTTPS</code> health check requests with the applicable SSL/TLS certificate.
* </p>
* <p>
* Some endpoints require that HTTPS requests include the host name in the <code>client_hello</code> message. If you
* don't enable SNI, the status of the health check will be SSL alert <code>handshake_failure</code>. A health check
* can also have that status for other reasons. If SNI is enabled and you're still getting the error, check the
* SSL/TLS configuration on your endpoint and confirm that your certificate is valid.
* </p>
* <p>
* The SSL/TLS certificate on your endpoint includes a domain name in the <code>Common Name</code> field and
* possibly several more in the <code>Subject Alternative Names</code> field. One of the domain names in the
* certificate should match the value that you specify for <code>FullyQualifiedDomainName</code>. If the endpoint
* responds to the <code>client_hello</code> message with a certificate that does not include the domain name that
* you specified in <code>FullyQualifiedDomainName</code>, a health checker will retry the handshake. In the second
* attempt, the health checker will omit <code>FullyQualifiedDomainName</code> from the <code>client_hello</code>
* message.
* </p>
*
* @param enableSNI
* Specify whether you want Amazon Route 53 to send the value of <code>FullyQualifiedDomainName</code> to the
* endpoint in the <code>client_hello</code> message during <code>TLS</code> negotiation. This allows the
* endpoint to respond to <code>HTTPS</code> health check requests with the applicable SSL/TLS
* certificate.</p>
* <p>
* Some endpoints require that HTTPS requests include the host name in the <code>client_hello</code> message.
* If you don't enable SNI, the status of the health check will be SSL alert <code>handshake_failure</code>.
* A health check can also have that status for other reasons. If SNI is enabled and you're still getting the
* error, check the SSL/TLS configuration on your endpoint and confirm that your certificate is valid.
* </p>
* <p>
* The SSL/TLS certificate on your endpoint includes a domain name in the <code>Common Name</code> field and
* possibly several more in the <code>Subject Alternative Names</code> field. One of the domain names in the
* certificate should match the value that you specify for <code>FullyQualifiedDomainName</code>. If the
* endpoint responds to the <code>client_hello</code> message with a certificate that does not include the
* domain name that you specified in <code>FullyQualifiedDomainName</code>, a health checker will retry the
* handshake. In the second attempt, the health checker will omit <code>FullyQualifiedDomainName</code> from
* the <code>client_hello</code> message.
* @return Returns a reference to this object so that method calls can be chained together.
*/
public UpdateHealthCheckRequest withEnableSNI(Boolean enableSNI) {
setEnableSNI(enableSNI);
return this;
}
/**
* <p>
* Specify whether you want Amazon Route 53 to send the value of <code>FullyQualifiedDomainName</code> to the
* endpoint in the <code>client_hello</code> message during <code>TLS</code> negotiation. This allows the endpoint
* to respond to <code>HTTPS</code> health check requests with the applicable SSL/TLS certificate.
* </p>
* <p>
* Some endpoints require that HTTPS requests include the host name in the <code>client_hello</code> message. If you
* don't enable SNI, the status of the health check will be SSL alert <code>handshake_failure</code>. A health check
* can also have that status for other reasons. If SNI is enabled and you're still getting the error, check the
* SSL/TLS configuration on your endpoint and confirm that your certificate is valid.
* </p>
* <p>
* The SSL/TLS certificate on your endpoint includes a domain name in the <code>Common Name</code> field and
* possibly several more in the <code>Subject Alternative Names</code> field. One of the domain names in the
* certificate should match the value that you specify for <code>FullyQualifiedDomainName</code>. If the endpoint
* responds to the <code>client_hello</code> message with a certificate that does not include the domain name that
* you specified in <code>FullyQualifiedDomainName</code>, a health checker will retry the handshake. In the second
* attempt, the health checker will omit <code>FullyQualifiedDomainName</code> from the <code>client_hello</code>
* message.
* </p>
*
* @return Specify whether you want Amazon Route 53 to send the value of <code>FullyQualifiedDomainName</code> to
* the endpoint in the <code>client_hello</code> message during <code>TLS</code> negotiation. This allows
* the endpoint to respond to <code>HTTPS</code> health check requests with the applicable SSL/TLS
* certificate.</p>
* <p>
* Some endpoints require that HTTPS requests include the host name in the <code>client_hello</code>
* message. If you don't enable SNI, the status of the health check will be SSL alert
* <code>handshake_failure</code>. A health check can also have that status for other reasons. If SNI is
* enabled and you're still getting the error, check the SSL/TLS configuration on your endpoint and confirm
* that your certificate is valid.
* </p>
* <p>
* The SSL/TLS certificate on your endpoint includes a domain name in the <code>Common Name</code> field and
* possibly several more in the <code>Subject Alternative Names</code> field. One of the domain names in the
* certificate should match the value that you specify for <code>FullyQualifiedDomainName</code>. If the
* endpoint responds to the <code>client_hello</code> message with a certificate that does not include the
* domain name that you specified in <code>FullyQualifiedDomainName</code>, a health checker will retry the
* handshake. In the second attempt, the health checker will omit <code>FullyQualifiedDomainName</code> from
* the <code>client_hello</code> message.
*/
public Boolean isEnableSNI() {
return this.enableSNI;
}
/**
* <p>
* A complex type that contains one <code>Region</code> element for each region that you want Amazon Route 53 health
* checkers to check the specified endpoint from.
* </p>
*
* @return A complex type that contains one <code>Region</code> element for each region that you want Amazon Route
* 53 health checkers to check the specified endpoint from.
* @see HealthCheckRegion
*/
public java.util.List<String> getRegions() {
if (regions == null) {
regions = new com.amazonaws.internal.SdkInternalList<String>();
}
return regions;
}
/**
* <p>
* A complex type that contains one <code>Region</code> element for each region that you want Amazon Route 53 health
* checkers to check the specified endpoint from.
* </p>
*
* @param regions
* A complex type that contains one <code>Region</code> element for each region that you want Amazon Route 53
* health checkers to check the specified endpoint from.
* @see HealthCheckRegion
*/
public void setRegions(java.util.Collection<String> regions) {
if (regions == null) {
this.regions = null;
return;
}
this.regions = new com.amazonaws.internal.SdkInternalList<String>(regions);
}
/**
* <p>
* A complex type that contains one <code>Region</code> element for each region that you want Amazon Route 53 health
* checkers to check the specified endpoint from.
* </p>
* <p>
* <b>NOTE:</b> This method appends the values to the existing list (if any). Use
* {@link #setRegions(java.util.Collection)} or {@link #withRegions(java.util.Collection)} if you want to override
* the existing values.
* </p>
*
* @param regions
* A complex type that contains one <code>Region</code> element for each region that you want Amazon Route 53
* health checkers to check the specified endpoint from.
* @return Returns a reference to this object so that method calls can be chained together.
* @see HealthCheckRegion
*/
public UpdateHealthCheckRequest withRegions(String... regions) {
if (this.regions == null) {
setRegions(new com.amazonaws.internal.SdkInternalList<String>(regions.length));
}
for (String ele : regions) {
this.regions.add(ele);
}
return this;
}
/**
* <p>
* A complex type that contains one <code>Region</code> element for each region that you want Amazon Route 53 health
* checkers to check the specified endpoint from.
* </p>
*
* @param regions
* A complex type that contains one <code>Region</code> element for each region that you want Amazon Route 53
* health checkers to check the specified endpoint from.
* @return Returns a reference to this object so that method calls can be chained together.
* @see HealthCheckRegion
*/
public UpdateHealthCheckRequest withRegions(java.util.Collection<String> regions) {
setRegions(regions);
return this;
}
/**
* <p>
* A complex type that contains one <code>Region</code> element for each region that you want Amazon Route 53 health
* checkers to check the specified endpoint from.
* </p>
*
* @param regions
* A complex type that contains one <code>Region</code> element for each region that you want Amazon Route 53
* health checkers to check the specified endpoint from.
* @return Returns a reference to this object so that method calls can be chained together.
* @see HealthCheckRegion
*/
public UpdateHealthCheckRequest withRegions(HealthCheckRegion... regions) {
com.amazonaws.internal.SdkInternalList<String> regionsCopy = new com.amazonaws.internal.SdkInternalList<String>(regions.length);
for (HealthCheckRegion value : regions) {
regionsCopy.add(value.toString());
}
if (getRegions() == null) {
setRegions(regionsCopy);
} else {
getRegions().addAll(regionsCopy);
}
return this;
}
/**
* @param alarmIdentifier
*/
public void setAlarmIdentifier(AlarmIdentifier alarmIdentifier) {
this.alarmIdentifier = alarmIdentifier;
}
/**
* @return
*/
public AlarmIdentifier getAlarmIdentifier() {
return this.alarmIdentifier;
}
/**
* @param alarmIdentifier
* @return Returns a reference to this object so that method calls can be chained together.
*/
public UpdateHealthCheckRequest withAlarmIdentifier(AlarmIdentifier alarmIdentifier) {
setAlarmIdentifier(alarmIdentifier);
return this;
}
/**
* <p>
* When CloudWatch has insufficient data about the metric to determine the alarm state, the status that you want
* Amazon Route 53 to assign to the health check:
* </p>
* <ul>
* <li>
* <p>
* <code>Healthy</code>: Amazon Route 53 considers the health check to be healthy.
* </p>
* </li>
* <li>
* <p>
* <code>Unhealthy</code>: Amazon Route 53 considers the health check to be unhealthy.
* </p>
* </li>
* <li>
* <p>
* <code>LastKnownStatus</code>: Amazon Route 53 uses the status of the health check from the last time CloudWatch
* had sufficient data to determine the alarm state. For new health checks that have no last known status, the
* default status for the health check is healthy.
* </p>
* </li>
* </ul>
*
* @param insufficientDataHealthStatus
* When CloudWatch has insufficient data about the metric to determine the alarm state, the status that you
* want Amazon Route 53 to assign to the health check:</p>
* <ul>
* <li>
* <p>
* <code>Healthy</code>: Amazon Route 53 considers the health check to be healthy.
* </p>
* </li>
* <li>
* <p>
* <code>Unhealthy</code>: Amazon Route 53 considers the health check to be unhealthy.
* </p>
* </li>
* <li>
* <p>
* <code>LastKnownStatus</code>: Amazon Route 53 uses the status of the health check from the last time
* CloudWatch had sufficient data to determine the alarm state. For new health checks that have no last known
* status, the default status for the health check is healthy.
* </p>
* </li>
* @see InsufficientDataHealthStatus
*/
public void setInsufficientDataHealthStatus(String insufficientDataHealthStatus) {
this.insufficientDataHealthStatus = insufficientDataHealthStatus;
}
/**
* <p>
* When CloudWatch has insufficient data about the metric to determine the alarm state, the status that you want
* Amazon Route 53 to assign to the health check:
* </p>
* <ul>
* <li>
* <p>
* <code>Healthy</code>: Amazon Route 53 considers the health check to be healthy.
* </p>
* </li>
* <li>
* <p>
* <code>Unhealthy</code>: Amazon Route 53 considers the health check to be unhealthy.
* </p>
* </li>
* <li>
* <p>
* <code>LastKnownStatus</code>: Amazon Route 53 uses the status of the health check from the last time CloudWatch
* had sufficient data to determine the alarm state. For new health checks that have no last known status, the
* default status for the health check is healthy.
* </p>
* </li>
* </ul>
*
* @return When CloudWatch has insufficient data about the metric to determine the alarm state, the status that you
* want Amazon Route 53 to assign to the health check:</p>
* <ul>
* <li>
* <p>
* <code>Healthy</code>: Amazon Route 53 considers the health check to be healthy.
* </p>
* </li>
* <li>
* <p>
* <code>Unhealthy</code>: Amazon Route 53 considers the health check to be unhealthy.
* </p>
* </li>
* <li>
* <p>
* <code>LastKnownStatus</code>: Amazon Route 53 uses the status of the health check from the last time
* CloudWatch had sufficient data to determine the alarm state. For new health checks that have no last
* known status, the default status for the health check is healthy.
* </p>
* </li>
* @see InsufficientDataHealthStatus
*/
public String getInsufficientDataHealthStatus() {
return this.insufficientDataHealthStatus;
}
/**
* <p>
* When CloudWatch has insufficient data about the metric to determine the alarm state, the status that you want
* Amazon Route 53 to assign to the health check:
* </p>
* <ul>
* <li>
* <p>
* <code>Healthy</code>: Amazon Route 53 considers the health check to be healthy.
* </p>
* </li>
* <li>
* <p>
* <code>Unhealthy</code>: Amazon Route 53 considers the health check to be unhealthy.
* </p>
* </li>
* <li>
* <p>
* <code>LastKnownStatus</code>: Amazon Route 53 uses the status of the health check from the last time CloudWatch
* had sufficient data to determine the alarm state. For new health checks that have no last known status, the
* default status for the health check is healthy.
* </p>
* </li>
* </ul>
*
* @param insufficientDataHealthStatus
* When CloudWatch has insufficient data about the metric to determine the alarm state, the status that you
* want Amazon Route 53 to assign to the health check:</p>
* <ul>
* <li>
* <p>
* <code>Healthy</code>: Amazon Route 53 considers the health check to be healthy.
* </p>
* </li>
* <li>
* <p>
* <code>Unhealthy</code>: Amazon Route 53 considers the health check to be unhealthy.
* </p>
* </li>
* <li>
* <p>
* <code>LastKnownStatus</code>: Amazon Route 53 uses the status of the health check from the last time
* CloudWatch had sufficient data to determine the alarm state. For new health checks that have no last known
* status, the default status for the health check is healthy.
* </p>
* </li>
* @return Returns a reference to this object so that method calls can be chained together.
* @see InsufficientDataHealthStatus
*/
public UpdateHealthCheckRequest withInsufficientDataHealthStatus(String insufficientDataHealthStatus) {
setInsufficientDataHealthStatus(insufficientDataHealthStatus);
return this;
}
/**
* <p>
* When CloudWatch has insufficient data about the metric to determine the alarm state, the status that you want
* Amazon Route 53 to assign to the health check:
* </p>
* <ul>
* <li>
* <p>
* <code>Healthy</code>: Amazon Route 53 considers the health check to be healthy.
* </p>
* </li>
* <li>
* <p>
* <code>Unhealthy</code>: Amazon Route 53 considers the health check to be unhealthy.
* </p>
* </li>
* <li>
* <p>
* <code>LastKnownStatus</code>: Amazon Route 53 uses the status of the health check from the last time CloudWatch
* had sufficient data to determine the alarm state. For new health checks that have no last known status, the
* default status for the health check is healthy.
* </p>
* </li>
* </ul>
*
* @param insufficientDataHealthStatus
* When CloudWatch has insufficient data about the metric to determine the alarm state, the status that you
* want Amazon Route 53 to assign to the health check:</p>
* <ul>
* <li>
* <p>
* <code>Healthy</code>: Amazon Route 53 considers the health check to be healthy.
* </p>
* </li>
* <li>
* <p>
* <code>Unhealthy</code>: Amazon Route 53 considers the health check to be unhealthy.
* </p>
* </li>
* <li>
* <p>
* <code>LastKnownStatus</code>: Amazon Route 53 uses the status of the health check from the last time
* CloudWatch had sufficient data to determine the alarm state. For new health checks that have no last known
* status, the default status for the health check is healthy.
* </p>
* </li>
* @see InsufficientDataHealthStatus
*/
public void setInsufficientDataHealthStatus(InsufficientDataHealthStatus insufficientDataHealthStatus) {
this.insufficientDataHealthStatus = insufficientDataHealthStatus.toString();
}
/**
* <p>
* When CloudWatch has insufficient data about the metric to determine the alarm state, the status that you want
* Amazon Route 53 to assign to the health check:
* </p>
* <ul>
* <li>
* <p>
* <code>Healthy</code>: Amazon Route 53 considers the health check to be healthy.
* </p>
* </li>
* <li>
* <p>
* <code>Unhealthy</code>: Amazon Route 53 considers the health check to be unhealthy.
* </p>
* </li>
* <li>
* <p>
* <code>LastKnownStatus</code>: Amazon Route 53 uses the status of the health check from the last time CloudWatch
* had sufficient data to determine the alarm state. For new health checks that have no last known status, the
* default status for the health check is healthy.
* </p>
* </li>
* </ul>
*
* @param insufficientDataHealthStatus
* When CloudWatch has insufficient data about the metric to determine the alarm state, the status that you
* want Amazon Route 53 to assign to the health check:</p>
* <ul>
* <li>
* <p>
* <code>Healthy</code>: Amazon Route 53 considers the health check to be healthy.
* </p>
* </li>
* <li>
* <p>
* <code>Unhealthy</code>: Amazon Route 53 considers the health check to be unhealthy.
* </p>
* </li>
* <li>
* <p>
* <code>LastKnownStatus</code>: Amazon Route 53 uses the status of the health check from the last time
* CloudWatch had sufficient data to determine the alarm state. For new health checks that have no last known
* status, the default status for the health check is healthy.
* </p>
* </li>
* @return Returns a reference to this object so that method calls can be chained together.
* @see InsufficientDataHealthStatus
*/
public UpdateHealthCheckRequest withInsufficientDataHealthStatus(InsufficientDataHealthStatus insufficientDataHealthStatus) {
setInsufficientDataHealthStatus(insufficientDataHealthStatus);
return this;
}
/**
* Returns a string representation of this object; useful for testing and debugging.
*
* @return A string representation of this object.
*
* @see java.lang.Object#toString()
*/
@Override
public String toString() {
StringBuilder sb = new StringBuilder();
sb.append("{");
if (getHealthCheckId() != null)
sb.append("HealthCheckId: ").append(getHealthCheckId()).append(",");
if (getHealthCheckVersion() != null)
sb.append("HealthCheckVersion: ").append(getHealthCheckVersion()).append(",");
if (getIPAddress() != null)
sb.append("IPAddress: ").append(getIPAddress()).append(",");
if (getPort() != null)
sb.append("Port: ").append(getPort()).append(",");
if (getResourcePath() != null)
sb.append("ResourcePath: ").append(getResourcePath()).append(",");
if (getFullyQualifiedDomainName() != null)
sb.append("FullyQualifiedDomainName: ").append(getFullyQualifiedDomainName()).append(",");
if (getSearchString() != null)
sb.append("SearchString: ").append(getSearchString()).append(",");
if (getFailureThreshold() != null)
sb.append("FailureThreshold: ").append(getFailureThreshold()).append(",");
if (getInverted() != null)
sb.append("Inverted: ").append(getInverted()).append(",");
if (getHealthThreshold() != null)
sb.append("HealthThreshold: ").append(getHealthThreshold()).append(",");
if (getChildHealthChecks() != null)
sb.append("ChildHealthChecks: ").append(getChildHealthChecks()).append(",");
if (getEnableSNI() != null)
sb.append("EnableSNI: ").append(getEnableSNI()).append(",");
if (getRegions() != null)
sb.append("Regions: ").append(getRegions()).append(",");
if (getAlarmIdentifier() != null)
sb.append("AlarmIdentifier: ").append(getAlarmIdentifier()).append(",");
if (getInsufficientDataHealthStatus() != null)
sb.append("InsufficientDataHealthStatus: ").append(getInsufficientDataHealthStatus());
sb.append("}");
return sb.toString();
}
@Override
public boolean equals(Object obj) {
if (this == obj)
return true;
if (obj == null)
return false;
if (obj instanceof UpdateHealthCheckRequest == false)
return false;
UpdateHealthCheckRequest other = (UpdateHealthCheckRequest) obj;
if (other.getHealthCheckId() == null ^ this.getHealthCheckId() == null)
return false;
if (other.getHealthCheckId() != null && other.getHealthCheckId().equals(this.getHealthCheckId()) == false)
return false;
if (other.getHealthCheckVersion() == null ^ this.getHealthCheckVersion() == null)
return false;
if (other.getHealthCheckVersion() != null && other.getHealthCheckVersion().equals(this.getHealthCheckVersion()) == false)
return false;
if (other.getIPAddress() == null ^ this.getIPAddress() == null)
return false;
if (other.getIPAddress() != null && other.getIPAddress().equals(this.getIPAddress()) == false)
return false;
if (other.getPort() == null ^ this.getPort() == null)
return false;
if (other.getPort() != null && other.getPort().equals(this.getPort()) == false)
return false;
if (other.getResourcePath() == null ^ this.getResourcePath() == null)
return false;
if (other.getResourcePath() != null && other.getResourcePath().equals(this.getResourcePath()) == false)
return false;
if (other.getFullyQualifiedDomainName() == null ^ this.getFullyQualifiedDomainName() == null)
return false;
if (other.getFullyQualifiedDomainName() != null && other.getFullyQualifiedDomainName().equals(this.getFullyQualifiedDomainName()) == false)
return false;
if (other.getSearchString() == null ^ this.getSearchString() == null)
return false;
if (other.getSearchString() != null && other.getSearchString().equals(this.getSearchString()) == false)
return false;
if (other.getFailureThreshold() == null ^ this.getFailureThreshold() == null)
return false;
if (other.getFailureThreshold() != null && other.getFailureThreshold().equals(this.getFailureThreshold()) == false)
return false;
if (other.getInverted() == null ^ this.getInverted() == null)
return false;
if (other.getInverted() != null && other.getInverted().equals(this.getInverted()) == false)
return false;
if (other.getHealthThreshold() == null ^ this.getHealthThreshold() == null)
return false;
if (other.getHealthThreshold() != null && other.getHealthThreshold().equals(this.getHealthThreshold()) == false)
return false;
if (other.getChildHealthChecks() == null ^ this.getChildHealthChecks() == null)
return false;
if (other.getChildHealthChecks() != null && other.getChildHealthChecks().equals(this.getChildHealthChecks()) == false)
return false;
if (other.getEnableSNI() == null ^ this.getEnableSNI() == null)
return false;
if (other.getEnableSNI() != null && other.getEnableSNI().equals(this.getEnableSNI()) == false)
return false;
if (other.getRegions() == null ^ this.getRegions() == null)
return false;
if (other.getRegions() != null && other.getRegions().equals(this.getRegions()) == false)
return false;
if (other.getAlarmIdentifier() == null ^ this.getAlarmIdentifier() == null)
return false;
if (other.getAlarmIdentifier() != null && other.getAlarmIdentifier().equals(this.getAlarmIdentifier()) == false)
return false;
if (other.getInsufficientDataHealthStatus() == null ^ this.getInsufficientDataHealthStatus() == null)
return false;
if (other.getInsufficientDataHealthStatus() != null && other.getInsufficientDataHealthStatus().equals(this.getInsufficientDataHealthStatus()) == false)
return false;
return true;
}
@Override
public int hashCode() {
final int prime = 31;
int hashCode = 1;
hashCode = prime * hashCode + ((getHealthCheckId() == null) ? 0 : getHealthCheckId().hashCode());
hashCode = prime * hashCode + ((getHealthCheckVersion() == null) ? 0 : getHealthCheckVersion().hashCode());
hashCode = prime * hashCode + ((getIPAddress() == null) ? 0 : getIPAddress().hashCode());
hashCode = prime * hashCode + ((getPort() == null) ? 0 : getPort().hashCode());
hashCode = prime * hashCode + ((getResourcePath() == null) ? 0 : getResourcePath().hashCode());
hashCode = prime * hashCode + ((getFullyQualifiedDomainName() == null) ? 0 : getFullyQualifiedDomainName().hashCode());
hashCode = prime * hashCode + ((getSearchString() == null) ? 0 : getSearchString().hashCode());
hashCode = prime * hashCode + ((getFailureThreshold() == null) ? 0 : getFailureThreshold().hashCode());
hashCode = prime * hashCode + ((getInverted() == null) ? 0 : getInverted().hashCode());
hashCode = prime * hashCode + ((getHealthThreshold() == null) ? 0 : getHealthThreshold().hashCode());
hashCode = prime * hashCode + ((getChildHealthChecks() == null) ? 0 : getChildHealthChecks().hashCode());
hashCode = prime * hashCode + ((getEnableSNI() == null) ? 0 : getEnableSNI().hashCode());
hashCode = prime * hashCode + ((getRegions() == null) ? 0 : getRegions().hashCode());
hashCode = prime * hashCode + ((getAlarmIdentifier() == null) ? 0 : getAlarmIdentifier().hashCode());
hashCode = prime * hashCode + ((getInsufficientDataHealthStatus() == null) ? 0 : getInsufficientDataHealthStatus().hashCode());
return hashCode;
}
@Override
public UpdateHealthCheckRequest clone() {
return (UpdateHealthCheckRequest) super.clone();
}
}