/*
* Copyright 2012-2017 Amazon.com, Inc. or its affiliates. All Rights Reserved.
*
* Licensed under the Apache License, Version 2.0 (the "License"). You may not use this file except in compliance with
* the License. A copy of the License is located at
*
* http://aws.amazon.com/apache2.0
*
* or in the "license" file accompanying this file. This file is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR
* CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions
* and limitations under the License.
*/
package com.amazonaws.services.glacier;
import javax.annotation.Generated;
import com.amazonaws.*;
import com.amazonaws.regions.*;
import com.amazonaws.services.glacier.model.*;
import com.amazonaws.services.glacier.waiters.AmazonGlacierWaiters;
/**
* Interface for accessing Amazon Glacier.
* <p>
* <b>Note:</b> Do not directly implement this interface, new methods are added to it regularly. Extend from
* {@link com.amazonaws.services.glacier.AbstractAmazonGlacier} instead.
* </p>
* <p>
* <p>
* Amazon Glacier is a storage solution for "cold data."
* </p>
* <p>
* Amazon Glacier is an extremely low-cost storage service that provides secure, durable, and easy-to-use storage for
* data backup and archival. With Amazon Glacier, customers can store their data cost effectively for months, years, or
* decades. Amazon Glacier also enables customers to offload the administrative burdens of operating and scaling storage
* to AWS, so they don't have to worry about capacity planning, hardware provisioning, data replication, hardware
* failure and recovery, or time-consuming hardware migrations.
* </p>
* <p>
* Amazon Glacier is a great storage choice when low storage cost is paramount, your data is rarely retrieved, and
* retrieval latency of several hours is acceptable. If your application requires fast or frequent access to your data,
* consider using Amazon S3. For more information, see <a href="http://aws.amazon.com/s3/">Amazon Simple Storage Service
* (Amazon S3)</a>.
* </p>
* <p>
* You can store any kind of data in any format. There is no maximum limit on the total amount of data you can store in
* Amazon Glacier.
* </p>
* <p>
* If you are a first-time user of Amazon Glacier, we recommend that you begin by reading the following sections in the
* <i>Amazon Glacier Developer Guide</i>:
* </p>
* <ul>
* <li>
* <p>
* <a href="http://docs.aws.amazon.com/amazonglacier/latest/dev/introduction.html">What is Amazon Glacier</a> - This
* section of the Developer Guide describes the underlying data model, the operations it supports, and the AWS SDKs that
* you can use to interact with the service.
* </p>
* </li>
* <li>
* <p>
* <a href="http://docs.aws.amazon.com/amazonglacier/latest/dev/amazon-glacier-getting-started.html">Getting Started
* with Amazon Glacier</a> - The Getting Started section walks you through the process of creating a vault, uploading
* archives, creating jobs to download archives, retrieving the job output, and deleting archives.
* </p>
* </li>
* </ul>
*/
@Generated("com.amazonaws:aws-java-sdk-code-generator")
public interface AmazonGlacier {
/**
* The region metadata service name for computing region endpoints. You can use this value to retrieve metadata
* (such as supported regions) of the service.
*
* @see RegionUtils#getRegionsForService(String)
*/
String ENDPOINT_PREFIX = "glacier";
/**
* Overrides the default endpoint for this client ("https://glacier.us-east-1.amazonaws.com"). Callers can use this
* method to control which AWS region they want to work with.
* <p>
* Callers can pass in just the endpoint (ex: "glacier.us-east-1.amazonaws.com") or a full URL, including the
* protocol (ex: "https://glacier.us-east-1.amazonaws.com"). If the protocol is not specified here, the default
* protocol from this client's {@link ClientConfiguration} will be used, which by default is HTTPS.
* <p>
* For more information on using AWS regions with the AWS SDK for Java, and a complete list of all available
* endpoints for all AWS services, see: <a
* href="http://developer.amazonwebservices.com/connect/entry.jspa?externalID=3912">
* http://developer.amazonwebservices.com/connect/entry.jspa?externalID=3912</a>
* <p>
* <b>This method is not threadsafe. An endpoint should be configured when the client is created and before any
* service requests are made. Changing it afterwards creates inevitable race conditions for any service requests in
* transit or retrying.</b>
*
* @param endpoint
* The endpoint (ex: "glacier.us-east-1.amazonaws.com") or a full URL, including the protocol (ex:
* "https://glacier.us-east-1.amazonaws.com") of the region specific AWS endpoint this client will
* communicate with.
* @deprecated use {@link AwsClientBuilder#setEndpointConfiguration(AwsClientBuilder.EndpointConfiguration)} for
* example:
* {@code builder.setEndpointConfiguration(new EndpointConfiguration(endpoint, signingRegion));}
*/
@Deprecated
void setEndpoint(String endpoint);
/**
* An alternative to {@link AmazonGlacier#setEndpoint(String)}, sets the regional endpoint for this client's service
* calls. Callers can use this method to control which AWS region they want to work with.
* <p>
* By default, all service endpoints in all regions use the https protocol. To use http instead, specify it in the
* {@link ClientConfiguration} supplied at construction.
* <p>
* <b>This method is not threadsafe. A region should be configured when the client is created and before any service
* requests are made. Changing it afterwards creates inevitable race conditions for any service requests in transit
* or retrying.</b>
*
* @param region
* The region this client will communicate with. See {@link Region#getRegion(com.amazonaws.regions.Regions)}
* for accessing a given region. Must not be null and must be a region where the service is available.
*
* @see Region#getRegion(com.amazonaws.regions.Regions)
* @see Region#createClient(Class, com.amazonaws.auth.AWSCredentialsProvider, ClientConfiguration)
* @see Region#isServiceSupported(String)
* @deprecated use {@link AwsClientBuilder#setRegion(String)}
*/
@Deprecated
void setRegion(Region region);
/**
* <p>
* This operation aborts a multipart upload identified by the upload ID.
* </p>
* <p>
* After the Abort Multipart Upload request succeeds, you cannot upload any more parts to the multipart upload or
* complete the multipart upload. Aborting a completed upload fails. However, aborting an already-aborted upload
* will succeed, for a short time. For more information about uploading a part and completing a multipart upload,
* see <a>UploadMultipartPart</a> and <a>CompleteMultipartUpload</a>.
* </p>
* <p>
* This operation is idempotent.
* </p>
* <p>
* An AWS account has full permission to perform all operations (actions). However, AWS Identity and Access
* Management (IAM) users don't have any permissions by default. You must grant them explicit permission to perform
* specific actions. For more information, see <a
* href="http://docs.aws.amazon.com/amazonglacier/latest/dev/using-iam-with-amazon-glacier.html">Access Control
* Using AWS Identity and Access Management (IAM)</a>.
* </p>
* <p>
* For conceptual information and underlying REST API, see <a
* href="http://docs.aws.amazon.com/amazonglacier/latest/dev/working-with-archives.html">Working with Archives in
* Amazon Glacier</a> and <a
* href="http://docs.aws.amazon.com/amazonglacier/latest/dev/api-multipart-abort-upload.html">Abort Multipart
* Upload</a> in the <i>Amazon Glacier Developer Guide</i>.
* </p>
*
* @param abortMultipartUploadRequest
* Provides options to abort a multipart upload identified by the upload ID.</p>
* <p>
* For information about the underlying REST API, see <a
* href="http://docs.aws.amazon.com/amazonglacier/latest/dev/api-multipart-abort-upload.html">Abort Multipart
* Upload</a>. For conceptual information, see <a
* href="http://docs.aws.amazon.com/amazonglacier/latest/dev/working-with-archives.html">Working with
* Archives in Amazon Glacier</a>.
* @return Result of the AbortMultipartUpload operation returned by the service.
* @throws ResourceNotFoundException
* Returned if the specified resource (such as a vault, upload ID, or job ID) doesn't exist.
* @throws InvalidParameterValueException
* Returned if a parameter of the request is incorrectly specified.
* @throws MissingParameterValueException
* Returned if a required header or parameter is missing from the request.
* @throws ServiceUnavailableException
* Returned if the service cannot complete the request.
* @sample AmazonGlacier.AbortMultipartUpload
*/
AbortMultipartUploadResult abortMultipartUpload(AbortMultipartUploadRequest abortMultipartUploadRequest);
/**
* <p>
* This operation aborts the vault locking process if the vault lock is not in the <code>Locked</code> state. If the
* vault lock is in the <code>Locked</code> state when this operation is requested, the operation returns an
* <code>AccessDeniedException</code> error. Aborting the vault locking process removes the vault lock policy from
* the specified vault.
* </p>
* <p>
* A vault lock is put into the <code>InProgress</code> state by calling <a>InitiateVaultLock</a>. A vault lock is
* put into the <code>Locked</code> state by calling <a>CompleteVaultLock</a>. You can get the state of a vault lock
* by calling <a>GetVaultLock</a>. For more information about the vault locking process, see <a
* href="http://docs.aws.amazon.com/amazonglacier/latest/dev/vault-lock.html">Amazon Glacier Vault Lock</a>. For
* more information about vault lock policies, see <a
* href="http://docs.aws.amazon.com/amazonglacier/latest/dev/vault-lock-policy.html">Amazon Glacier Access Control
* with Vault Lock Policies</a>.
* </p>
* <p>
* This operation is idempotent. You can successfully invoke this operation multiple times, if the vault lock is in
* the <code>InProgress</code> state or if there is no policy associated with the vault.
* </p>
*
* @param abortVaultLockRequest
* The input values for <code>AbortVaultLock</code>.
* @return Result of the AbortVaultLock operation returned by the service.
* @throws ResourceNotFoundException
* Returned if the specified resource (such as a vault, upload ID, or job ID) doesn't exist.
* @throws InvalidParameterValueException
* Returned if a parameter of the request is incorrectly specified.
* @throws MissingParameterValueException
* Returned if a required header or parameter is missing from the request.
* @throws ServiceUnavailableException
* Returned if the service cannot complete the request.
* @sample AmazonGlacier.AbortVaultLock
*/
AbortVaultLockResult abortVaultLock(AbortVaultLockRequest abortVaultLockRequest);
/**
* <p>
* This operation adds the specified tags to a vault. Each tag is composed of a key and a value. Each vault can have
* up to 10 tags. If your request would cause the tag limit for the vault to be exceeded, the operation throws the
* <code>LimitExceededException</code> error. If a tag already exists on the vault under a specified key, the
* existing key value will be overwritten. For more information about tags, see <a
* href="http://docs.aws.amazon.com/amazonglacier/latest/dev/tagging.html">Tagging Amazon Glacier Resources</a>.
* </p>
*
* @param addTagsToVaultRequest
* The input values for <code>AddTagsToVault</code>.
* @return Result of the AddTagsToVault operation returned by the service.
* @throws InvalidParameterValueException
* Returned if a parameter of the request is incorrectly specified.
* @throws MissingParameterValueException
* Returned if a required header or parameter is missing from the request.
* @throws ResourceNotFoundException
* Returned if the specified resource (such as a vault, upload ID, or job ID) doesn't exist.
* @throws LimitExceededException
* Returned if the request results in a vault or account limit being exceeded.
* @throws ServiceUnavailableException
* Returned if the service cannot complete the request.
* @sample AmazonGlacier.AddTagsToVault
*/
AddTagsToVaultResult addTagsToVault(AddTagsToVaultRequest addTagsToVaultRequest);
/**
* <p>
* You call this operation to inform Amazon Glacier that all the archive parts have been uploaded and that Amazon
* Glacier can now assemble the archive from the uploaded parts. After assembling and saving the archive to the
* vault, Amazon Glacier returns the URI path of the newly created archive resource. Using the URI path, you can
* then access the archive. After you upload an archive, you should save the archive ID returned to retrieve the
* archive at a later point. You can also get the vault inventory to obtain a list of archive IDs in a vault. For
* more information, see <a>InitiateJob</a>.
* </p>
* <p>
* In the request, you must include the computed SHA256 tree hash of the entire archive you have uploaded. For
* information about computing a SHA256 tree hash, see <a
* href="http://docs.aws.amazon.com/amazonglacier/latest/dev/checksum-calculations.html">Computing Checksums</a>. On
* the server side, Amazon Glacier also constructs the SHA256 tree hash of the assembled archive. If the values
* match, Amazon Glacier saves the archive to the vault; otherwise, it returns an error, and the operation fails.
* The <a>ListParts</a> operation returns a list of parts uploaded for a specific multipart upload. It includes
* checksum information for each uploaded part that can be used to debug a bad checksum issue.
* </p>
* <p>
* Additionally, Amazon Glacier also checks for any missing content ranges when assembling the archive, if missing
* content ranges are found, Amazon Glacier returns an error and the operation fails.
* </p>
* <p>
* Complete Multipart Upload is an idempotent operation. After your first successful complete multipart upload, if
* you call the operation again within a short period, the operation will succeed and return the same archive ID.
* This is useful in the event you experience a network issue that causes an aborted connection or receive a 500
* server error, in which case you can repeat your Complete Multipart Upload request and get the same archive ID
* without creating duplicate archives. Note, however, that after the multipart upload completes, you cannot call
* the List Parts operation and the multipart upload will not appear in List Multipart Uploads response, even if
* idempotent complete is possible.
* </p>
* <p>
* An AWS account has full permission to perform all operations (actions). However, AWS Identity and Access
* Management (IAM) users don't have any permissions by default. You must grant them explicit permission to perform
* specific actions. For more information, see <a
* href="http://docs.aws.amazon.com/amazonglacier/latest/dev/using-iam-with-amazon-glacier.html">Access Control
* Using AWS Identity and Access Management (IAM)</a>.
* </p>
* <p>
* For conceptual information and underlying REST API, see <a
* href="http://docs.aws.amazon.com/amazonglacier/latest/dev/uploading-archive-mpu.html">Uploading Large Archives in
* Parts (Multipart Upload)</a> and <a
* href="http://docs.aws.amazon.com/amazonglacier/latest/dev/api-multipart-complete-upload.html">Complete Multipart
* Upload</a> in the <i>Amazon Glacier Developer Guide</i>.
* </p>
*
* @param completeMultipartUploadRequest
* Provides options to complete a multipart upload operation. This informs Amazon Glacier that all the
* archive parts have been uploaded and Amazon Glacier can now assemble the archive from the uploaded parts.
* After assembling and saving the archive to the vault, Amazon Glacier returns the URI path of the newly
* created archive resource.
* @return Result of the CompleteMultipartUpload operation returned by the service.
* @throws ResourceNotFoundException
* Returned if the specified resource (such as a vault, upload ID, or job ID) doesn't exist.
* @throws InvalidParameterValueException
* Returned if a parameter of the request is incorrectly specified.
* @throws MissingParameterValueException
* Returned if a required header or parameter is missing from the request.
* @throws ServiceUnavailableException
* Returned if the service cannot complete the request.
* @sample AmazonGlacier.CompleteMultipartUpload
*/
CompleteMultipartUploadResult completeMultipartUpload(CompleteMultipartUploadRequest completeMultipartUploadRequest);
/**
* <p>
* This operation completes the vault locking process by transitioning the vault lock from the
* <code>InProgress</code> state to the <code>Locked</code> state, which causes the vault lock policy to become
* unchangeable. A vault lock is put into the <code>InProgress</code> state by calling <a>InitiateVaultLock</a>. You
* can obtain the state of the vault lock by calling <a>GetVaultLock</a>. For more information about the vault
* locking process, <a href="http://docs.aws.amazon.com/amazonglacier/latest/dev/vault-lock.html">Amazon Glacier
* Vault Lock</a>.
* </p>
* <p>
* This operation is idempotent. This request is always successful if the vault lock is in the <code>Locked</code>
* state and the provided lock ID matches the lock ID originally used to lock the vault.
* </p>
* <p>
* If an invalid lock ID is passed in the request when the vault lock is in the <code>Locked</code> state, the
* operation returns an <code>AccessDeniedException</code> error. If an invalid lock ID is passed in the request
* when the vault lock is in the <code>InProgress</code> state, the operation throws an
* <code>InvalidParameter</code> error.
* </p>
*
* @param completeVaultLockRequest
* The input values for <code>CompleteVaultLock</code>.
* @return Result of the CompleteVaultLock operation returned by the service.
* @throws ResourceNotFoundException
* Returned if the specified resource (such as a vault, upload ID, or job ID) doesn't exist.
* @throws InvalidParameterValueException
* Returned if a parameter of the request is incorrectly specified.
* @throws MissingParameterValueException
* Returned if a required header or parameter is missing from the request.
* @throws ServiceUnavailableException
* Returned if the service cannot complete the request.
* @sample AmazonGlacier.CompleteVaultLock
*/
CompleteVaultLockResult completeVaultLock(CompleteVaultLockRequest completeVaultLockRequest);
/**
* <p>
* This operation creates a new vault with the specified name. The name of the vault must be unique within a region
* for an AWS account. You can create up to 1,000 vaults per account. If you need to create more vaults, contact
* Amazon Glacier.
* </p>
* <p>
* You must use the following guidelines when naming a vault.
* </p>
* <ul>
* <li>
* <p>
* Names can be between 1 and 255 characters long.
* </p>
* </li>
* <li>
* <p>
* Allowed characters are a-z, A-Z, 0-9, '_' (underscore), '-' (hyphen), and '.' (period).
* </p>
* </li>
* </ul>
* <p>
* This operation is idempotent.
* </p>
* <p>
* An AWS account has full permission to perform all operations (actions). However, AWS Identity and Access
* Management (IAM) users don't have any permissions by default. You must grant them explicit permission to perform
* specific actions. For more information, see <a
* href="http://docs.aws.amazon.com/amazonglacier/latest/dev/using-iam-with-amazon-glacier.html">Access Control
* Using AWS Identity and Access Management (IAM)</a>.
* </p>
* <p>
* For conceptual information and underlying REST API, see <a
* href="http://docs.aws.amazon.com/amazonglacier/latest/dev/creating-vaults.html">Creating a Vault in Amazon
* Glacier</a> and <a href="http://docs.aws.amazon.com/amazonglacier/latest/dev/api-vault-put.html">Create Vault
* </a> in the <i>Amazon Glacier Developer Guide</i>.
* </p>
*
* @param createVaultRequest
* Provides options to create a vault.
* @return Result of the CreateVault operation returned by the service.
* @throws InvalidParameterValueException
* Returned if a parameter of the request is incorrectly specified.
* @throws MissingParameterValueException
* Returned if a required header or parameter is missing from the request.
* @throws ServiceUnavailableException
* Returned if the service cannot complete the request.
* @throws LimitExceededException
* Returned if the request results in a vault or account limit being exceeded.
* @sample AmazonGlacier.CreateVault
*/
CreateVaultResult createVault(CreateVaultRequest createVaultRequest);
/**
* <p>
* This operation deletes an archive from a vault. Subsequent requests to initiate a retrieval of this archive will
* fail. Archive retrievals that are in progress for this archive ID may or may not succeed according to the
* following scenarios:
* </p>
* <ul>
* <li>
* <p>
* If the archive retrieval job is actively preparing the data for download when Amazon Glacier receives the delete
* archive request, the archival retrieval operation might fail.
* </p>
* </li>
* <li>
* <p>
* If the archive retrieval job has successfully prepared the archive for download when Amazon Glacier receives the
* delete archive request, you will be able to download the output.
* </p>
* </li>
* </ul>
* <p>
* This operation is idempotent. Attempting to delete an already-deleted archive does not result in an error.
* </p>
* <p>
* An AWS account has full permission to perform all operations (actions). However, AWS Identity and Access
* Management (IAM) users don't have any permissions by default. You must grant them explicit permission to perform
* specific actions. For more information, see <a
* href="http://docs.aws.amazon.com/amazonglacier/latest/dev/using-iam-with-amazon-glacier.html">Access Control
* Using AWS Identity and Access Management (IAM)</a>.
* </p>
* <p>
* For conceptual information and underlying REST API, see <a
* href="http://docs.aws.amazon.com/amazonglacier/latest/dev/deleting-an-archive.html">Deleting an Archive in Amazon
* Glacier</a> and <a href="http://docs.aws.amazon.com/amazonglacier/latest/dev/api-archive-delete.html">Delete
* Archive</a> in the <i>Amazon Glacier Developer Guide</i>.
* </p>
*
* @param deleteArchiveRequest
* Provides options for deleting an archive from an Amazon Glacier vault.
* @return Result of the DeleteArchive operation returned by the service.
* @throws ResourceNotFoundException
* Returned if the specified resource (such as a vault, upload ID, or job ID) doesn't exist.
* @throws InvalidParameterValueException
* Returned if a parameter of the request is incorrectly specified.
* @throws MissingParameterValueException
* Returned if a required header or parameter is missing from the request.
* @throws ServiceUnavailableException
* Returned if the service cannot complete the request.
* @sample AmazonGlacier.DeleteArchive
*/
DeleteArchiveResult deleteArchive(DeleteArchiveRequest deleteArchiveRequest);
/**
* <p>
* This operation deletes a vault. Amazon Glacier will delete a vault only if there are no archives in the vault as
* of the last inventory and there have been no writes to the vault since the last inventory. If either of these
* conditions is not satisfied, the vault deletion fails (that is, the vault is not removed) and Amazon Glacier
* returns an error. You can use <a>DescribeVault</a> to return the number of archives in a vault, and you can use
* <a href="http://docs.aws.amazon.com/amazonglacier/latest/dev/api-initiate-job-post.html">Initiate a Job (POST
* jobs)</a> to initiate a new inventory retrieval for a vault. The inventory contains the archive IDs you use to
* delete archives using <a
* href="http://docs.aws.amazon.com/amazonglacier/latest/dev/api-archive-delete.html">Delete Archive (DELETE
* archive)</a>.
* </p>
* <p>
* This operation is idempotent.
* </p>
* <p>
* An AWS account has full permission to perform all operations (actions). However, AWS Identity and Access
* Management (IAM) users don't have any permissions by default. You must grant them explicit permission to perform
* specific actions. For more information, see <a
* href="http://docs.aws.amazon.com/amazonglacier/latest/dev/using-iam-with-amazon-glacier.html">Access Control
* Using AWS Identity and Access Management (IAM)</a>.
* </p>
* <p>
* For conceptual information and underlying REST API, see <a
* href="http://docs.aws.amazon.com/amazonglacier/latest/dev/deleting-vaults.html">Deleting a Vault in Amazon
* Glacier</a> and <a href="http://docs.aws.amazon.com/amazonglacier/latest/dev/api-vault-delete.html">Delete Vault
* </a> in the <i>Amazon Glacier Developer Guide</i>.
* </p>
*
* @param deleteVaultRequest
* Provides options for deleting a vault from Amazon Glacier.
* @return Result of the DeleteVault operation returned by the service.
* @throws ResourceNotFoundException
* Returned if the specified resource (such as a vault, upload ID, or job ID) doesn't exist.
* @throws InvalidParameterValueException
* Returned if a parameter of the request is incorrectly specified.
* @throws MissingParameterValueException
* Returned if a required header or parameter is missing from the request.
* @throws ServiceUnavailableException
* Returned if the service cannot complete the request.
* @sample AmazonGlacier.DeleteVault
*/
DeleteVaultResult deleteVault(DeleteVaultRequest deleteVaultRequest);
/**
* <p>
* This operation deletes the access policy associated with the specified vault. The operation is eventually
* consistent; that is, it might take some time for Amazon Glacier to completely remove the access policy, and you
* might still see the effect of the policy for a short time after you send the delete request.
* </p>
* <p>
* This operation is idempotent. You can invoke delete multiple times, even if there is no policy associated with
* the vault. For more information about vault access policies, see <a
* href="http://docs.aws.amazon.com/amazonglacier/latest/dev/vault-access-policy.html">Amazon Glacier Access Control
* with Vault Access Policies</a>.
* </p>
*
* @param deleteVaultAccessPolicyRequest
* DeleteVaultAccessPolicy input.
* @return Result of the DeleteVaultAccessPolicy operation returned by the service.
* @throws ResourceNotFoundException
* Returned if the specified resource (such as a vault, upload ID, or job ID) doesn't exist.
* @throws InvalidParameterValueException
* Returned if a parameter of the request is incorrectly specified.
* @throws MissingParameterValueException
* Returned if a required header or parameter is missing from the request.
* @throws ServiceUnavailableException
* Returned if the service cannot complete the request.
* @sample AmazonGlacier.DeleteVaultAccessPolicy
*/
DeleteVaultAccessPolicyResult deleteVaultAccessPolicy(DeleteVaultAccessPolicyRequest deleteVaultAccessPolicyRequest);
/**
* <p>
* This operation deletes the notification configuration set for a vault. The operation is eventually consistent;
* that is, it might take some time for Amazon Glacier to completely disable the notifications and you might still
* receive some notifications for a short time after you send the delete request.
* </p>
* <p>
* An AWS account has full permission to perform all operations (actions). However, AWS Identity and Access
* Management (IAM) users don't have any permissions by default. You must grant them explicit permission to perform
* specific actions. For more information, see <a
* href="http://docs.aws.amazon.com/latest/dev/using-iam-with-amazon-glacier.html">Access Control Using AWS Identity
* and Access Management (IAM)</a>.
* </p>
* <p>
* For conceptual information and underlying REST API, see <a
* href="http://docs.aws.amazon.com/amazonglacier/latest/dev/configuring-notifications.html">Configuring Vault
* Notifications in Amazon Glacier</a> and <a
* href="http://docs.aws.amazon.com/amazonglacier/latest/dev/api-vault-notifications-delete.html">Delete Vault
* Notification Configuration </a> in the Amazon Glacier Developer Guide.
* </p>
*
* @param deleteVaultNotificationsRequest
* Provides options for deleting a vault notification configuration from an Amazon Glacier vault.
* @return Result of the DeleteVaultNotifications operation returned by the service.
* @throws ResourceNotFoundException
* Returned if the specified resource (such as a vault, upload ID, or job ID) doesn't exist.
* @throws InvalidParameterValueException
* Returned if a parameter of the request is incorrectly specified.
* @throws MissingParameterValueException
* Returned if a required header or parameter is missing from the request.
* @throws ServiceUnavailableException
* Returned if the service cannot complete the request.
* @sample AmazonGlacier.DeleteVaultNotifications
*/
DeleteVaultNotificationsResult deleteVaultNotifications(DeleteVaultNotificationsRequest deleteVaultNotificationsRequest);
/**
* <p>
* This operation returns information about a job you previously initiated, including the job initiation date, the
* user who initiated the job, the job status code/message and the Amazon SNS topic to notify after Amazon Glacier
* completes the job. For more information about initiating a job, see <a>InitiateJob</a>.
* </p>
* <note>
* <p>
* This operation enables you to check the status of your job. However, it is strongly recommended that you set up
* an Amazon SNS topic and specify it in your initiate job request so that Amazon Glacier can notify the topic after
* it completes the job.
* </p>
* </note>
* <p>
* A job ID will not expire for at least 24 hours after Amazon Glacier completes the job.
* </p>
* <p>
* An AWS account has full permission to perform all operations (actions). However, AWS Identity and Access
* Management (IAM) users don't have any permissions by default. You must grant them explicit permission to perform
* specific actions. For more information, see <a
* href="http://docs.aws.amazon.com/amazonglacier/latest/dev/using-iam-with-amazon-glacier.html">Access Control
* Using AWS Identity and Access Management (IAM)</a>.
* </p>
* <p>
* For information about the underlying REST API, see <a
* href="http://docs.aws.amazon.com/amazonglacier/latest/dev/api-describe-job-get.html">Working with Archives in
* Amazon Glacier</a> in the <i>Amazon Glacier Developer Guide</i>.
* </p>
*
* @param describeJobRequest
* Provides options for retrieving a job description.
* @return Result of the DescribeJob operation returned by the service.
* @throws ResourceNotFoundException
* Returned if the specified resource (such as a vault, upload ID, or job ID) doesn't exist.
* @throws InvalidParameterValueException
* Returned if a parameter of the request is incorrectly specified.
* @throws MissingParameterValueException
* Returned if a required header or parameter is missing from the request.
* @throws ServiceUnavailableException
* Returned if the service cannot complete the request.
* @sample AmazonGlacier.DescribeJob
*/
DescribeJobResult describeJob(DescribeJobRequest describeJobRequest);
/**
* <p>
* This operation returns information about a vault, including the vault's Amazon Resource Name (ARN), the date the
* vault was created, the number of archives it contains, and the total size of all the archives in the vault. The
* number of archives and their total size are as of the last inventory generation. This means that if you add or
* remove an archive from a vault, and then immediately use Describe Vault, the change in contents will not be
* immediately reflected. If you want to retrieve the latest inventory of the vault, use <a>InitiateJob</a>. Amazon
* Glacier generates vault inventories approximately daily. For more information, see <a
* href="http://docs.aws.amazon.com/amazonglacier/latest/dev/vault-inventory.html">Downloading a Vault Inventory in
* Amazon Glacier</a>.
* </p>
* <p>
* An AWS account has full permission to perform all operations (actions). However, AWS Identity and Access
* Management (IAM) users don't have any permissions by default. You must grant them explicit permission to perform
* specific actions. For more information, see <a
* href="http://docs.aws.amazon.com/amazonglacier/latest/dev/using-iam-with-amazon-glacier.html">Access Control
* Using AWS Identity and Access Management (IAM)</a>.
* </p>
* <p>
* For conceptual information and underlying REST API, see <a
* href="http://docs.aws.amazon.com/amazonglacier/latest/dev/retrieving-vault-info.html">Retrieving Vault Metadata
* in Amazon Glacier</a> and <a
* href="http://docs.aws.amazon.com/amazonglacier/latest/dev/api-vault-get.html">Describe Vault </a> in the
* <i>Amazon Glacier Developer Guide</i>.
* </p>
*
* @param describeVaultRequest
* Provides options for retrieving metadata for a specific vault in Amazon Glacier.
* @return Result of the DescribeVault operation returned by the service.
* @throws ResourceNotFoundException
* Returned if the specified resource (such as a vault, upload ID, or job ID) doesn't exist.
* @throws InvalidParameterValueException
* Returned if a parameter of the request is incorrectly specified.
* @throws MissingParameterValueException
* Returned if a required header or parameter is missing from the request.
* @throws ServiceUnavailableException
* Returned if the service cannot complete the request.
* @sample AmazonGlacier.DescribeVault
*/
DescribeVaultResult describeVault(DescribeVaultRequest describeVaultRequest);
/**
* <p>
* This operation returns the current data retrieval policy for the account and region specified in the GET request.
* For more information about data retrieval policies, see <a
* href="http://docs.aws.amazon.com/amazonglacier/latest/dev/data-retrieval-policy.html">Amazon Glacier Data
* Retrieval Policies</a>.
* </p>
*
* @param getDataRetrievalPolicyRequest
* Input for GetDataRetrievalPolicy.
* @return Result of the GetDataRetrievalPolicy operation returned by the service.
* @throws InvalidParameterValueException
* Returned if a parameter of the request is incorrectly specified.
* @throws MissingParameterValueException
* Returned if a required header or parameter is missing from the request.
* @throws ServiceUnavailableException
* Returned if the service cannot complete the request.
* @sample AmazonGlacier.GetDataRetrievalPolicy
*/
GetDataRetrievalPolicyResult getDataRetrievalPolicy(GetDataRetrievalPolicyRequest getDataRetrievalPolicyRequest);
/**
* <p>
* This operation downloads the output of the job you initiated using <a>InitiateJob</a>. Depending on the job type
* you specified when you initiated the job, the output will be either the content of an archive or a vault
* inventory.
* </p>
* <p>
* You can download all the job output or download a portion of the output by specifying a byte range. In the case
* of an archive retrieval job, depending on the byte range you specify, Amazon Glacier returns the checksum for the
* portion of the data. You can compute the checksum on the client and verify that the values match to ensure the
* portion you downloaded is the correct data.
* </p>
* <p>
* A job ID will not expire for at least 24 hours after Amazon Glacier completes the job. That a byte range. For
* both archive and inventory retrieval jobs, you should verify the downloaded size against the size returned in the
* headers from the <b>Get Job Output</b> response.
* </p>
* <p>
* For archive retrieval jobs, you should also verify that the size is what you expected. If you download a portion
* of the output, the expected size is based on the range of bytes you specified. For example, if you specify a
* range of <code>bytes=0-1048575</code>, you should verify your download size is 1,048,576 bytes. If you download
* an entire archive, the expected size is the size of the archive when you uploaded it to Amazon Glacier The
* expected size is also returned in the headers from the <b>Get Job Output</b> response.
* </p>
* <p>
* In the case of an archive retrieval job, depending on the byte range you specify, Amazon Glacier returns the
* checksum for the portion of the data. To ensure the portion you downloaded is the correct data, compute the
* checksum on the client, verify that the values match, and verify that the size is what you expected.
* </p>
* <p>
* A job ID does not expire for at least 24 hours after Amazon Glacier completes the job. That is, you can download
* the job output within the 24 hours period after Amazon Glacier completes the job.
* </p>
* <p>
* An AWS account has full permission to perform all operations (actions). However, AWS Identity and Access
* Management (IAM) users don't have any permissions by default. You must grant them explicit permission to perform
* specific actions. For more information, see <a
* href="http://docs.aws.amazon.com/amazonglacier/latest/dev/using-iam-with-amazon-glacier.html">Access Control
* Using AWS Identity and Access Management (IAM)</a>.
* </p>
* <p>
* For conceptual information and the underlying REST API, see <a
* href="http://docs.aws.amazon.com/amazonglacier/latest/dev/vault-inventory.html">Downloading a Vault
* Inventory</a>, <a
* href="http://docs.aws.amazon.com/amazonglacier/latest/dev/downloading-an-archive.html">Downloading an
* Archive</a>, and <a href="http://docs.aws.amazon.com/amazonglacier/latest/dev/api-job-output-get.html">Get Job
* Output </a>
* </p>
*
* @param getJobOutputRequest
* Provides options for downloading output of an Amazon Glacier job.
* @return Result of the GetJobOutput operation returned by the service.
* @throws ResourceNotFoundException
* Returned if the specified resource (such as a vault, upload ID, or job ID) doesn't exist.
* @throws InvalidParameterValueException
* Returned if a parameter of the request is incorrectly specified.
* @throws MissingParameterValueException
* Returned if a required header or parameter is missing from the request.
* @throws ServiceUnavailableException
* Returned if the service cannot complete the request.
* @sample AmazonGlacier.GetJobOutput
*/
GetJobOutputResult getJobOutput(GetJobOutputRequest getJobOutputRequest);
/**
* <p>
* This operation retrieves the <code>access-policy</code> subresource set on the vault; for more information on
* setting this subresource, see <a
* href="http://docs.aws.amazon.com/amazonglacier/latest/dev/api-SetVaultAccessPolicy.html">Set Vault Access Policy
* (PUT access-policy)</a>. If there is no access policy set on the vault, the operation returns a
* <code>404 Not found</code> error. For more information about vault access policies, see <a
* href="http://docs.aws.amazon.com/amazonglacier/latest/dev/vault-access-policy.html">Amazon Glacier Access Control
* with Vault Access Policies</a>.
* </p>
*
* @param getVaultAccessPolicyRequest
* Input for GetVaultAccessPolicy.
* @return Result of the GetVaultAccessPolicy operation returned by the service.
* @throws ResourceNotFoundException
* Returned if the specified resource (such as a vault, upload ID, or job ID) doesn't exist.
* @throws InvalidParameterValueException
* Returned if a parameter of the request is incorrectly specified.
* @throws MissingParameterValueException
* Returned if a required header or parameter is missing from the request.
* @throws ServiceUnavailableException
* Returned if the service cannot complete the request.
* @sample AmazonGlacier.GetVaultAccessPolicy
*/
GetVaultAccessPolicyResult getVaultAccessPolicy(GetVaultAccessPolicyRequest getVaultAccessPolicyRequest);
/**
* <p>
* This operation retrieves the following attributes from the <code>lock-policy</code> subresource set on the
* specified vault:
* </p>
* <ul>
* <li>
* <p>
* The vault lock policy set on the vault.
* </p>
* </li>
* <li>
* <p>
* The state of the vault lock, which is either <code>InProgess</code> or <code>Locked</code>.
* </p>
* </li>
* <li>
* <p>
* When the lock ID expires. The lock ID is used to complete the vault locking process.
* </p>
* </li>
* <li>
* <p>
* When the vault lock was initiated and put into the <code>InProgress</code> state.
* </p>
* </li>
* </ul>
* <p>
* A vault lock is put into the <code>InProgress</code> state by calling <a>InitiateVaultLock</a>. A vault lock is
* put into the <code>Locked</code> state by calling <a>CompleteVaultLock</a>. You can abort the vault locking
* process by calling <a>AbortVaultLock</a>. For more information about the vault locking process, <a
* href="http://docs.aws.amazon.com/amazonglacier/latest/dev/vault-lock.html">Amazon Glacier Vault Lock</a>.
* </p>
* <p>
* If there is no vault lock policy set on the vault, the operation returns a <code>404 Not found</code> error. For
* more information about vault lock policies, <a
* href="http://docs.aws.amazon.com/amazonglacier/latest/dev/vault-lock-policy.html">Amazon Glacier Access Control
* with Vault Lock Policies</a>.
* </p>
*
* @param getVaultLockRequest
* The input values for <code>GetVaultLock</code>.
* @return Result of the GetVaultLock operation returned by the service.
* @throws ResourceNotFoundException
* Returned if the specified resource (such as a vault, upload ID, or job ID) doesn't exist.
* @throws InvalidParameterValueException
* Returned if a parameter of the request is incorrectly specified.
* @throws MissingParameterValueException
* Returned if a required header or parameter is missing from the request.
* @throws ServiceUnavailableException
* Returned if the service cannot complete the request.
* @sample AmazonGlacier.GetVaultLock
*/
GetVaultLockResult getVaultLock(GetVaultLockRequest getVaultLockRequest);
/**
* <p>
* This operation retrieves the <code>notification-configuration</code> subresource of the specified vault.
* </p>
* <p>
* For information about setting a notification configuration on a vault, see <a>SetVaultNotifications</a>. If a
* notification configuration for a vault is not set, the operation returns a <code>404 Not Found</code> error. For
* more information about vault notifications, see <a
* href="http://docs.aws.amazon.com/amazonglacier/latest/dev/configuring-notifications.html">Configuring Vault
* Notifications in Amazon Glacier</a>.
* </p>
* <p>
* An AWS account has full permission to perform all operations (actions). However, AWS Identity and Access
* Management (IAM) users don't have any permissions by default. You must grant them explicit permission to perform
* specific actions. For more information, see <a
* href="http://docs.aws.amazon.com/amazonglacier/latest/dev/using-iam-with-amazon-glacier.html">Access Control
* Using AWS Identity and Access Management (IAM)</a>.
* </p>
* <p>
* For conceptual information and underlying REST API, see <a
* href="http://docs.aws.amazon.com/amazonglacier/latest/dev/configuring-notifications.html">Configuring Vault
* Notifications in Amazon Glacier</a> and <a
* href="http://docs.aws.amazon.com/amazonglacier/latest/dev/api-vault-notifications-get.html">Get Vault
* Notification Configuration </a> in the <i>Amazon Glacier Developer Guide</i>.
* </p>
*
* @param getVaultNotificationsRequest
* Provides options for retrieving the notification configuration set on an Amazon Glacier vault.
* @return Result of the GetVaultNotifications operation returned by the service.
* @throws ResourceNotFoundException
* Returned if the specified resource (such as a vault, upload ID, or job ID) doesn't exist.
* @throws InvalidParameterValueException
* Returned if a parameter of the request is incorrectly specified.
* @throws MissingParameterValueException
* Returned if a required header or parameter is missing from the request.
* @throws ServiceUnavailableException
* Returned if the service cannot complete the request.
* @sample AmazonGlacier.GetVaultNotifications
*/
GetVaultNotificationsResult getVaultNotifications(GetVaultNotificationsRequest getVaultNotificationsRequest);
/**
* <p>
* This operation initiates a job of the specified type. In this release, you can initiate a job to retrieve either
* an archive or a vault inventory (a list of archives in a vault).
* </p>
* <p>
* Retrieving data from Amazon Glacier is a two-step process:
* </p>
* <ol>
* <li>
* <p>
* Initiate a retrieval job.
* </p>
* <note>
* <p>
* A data retrieval policy can cause your initiate retrieval job request to fail with a PolicyEnforcedException
* exception. For more information about data retrieval policies, see <a
* href="http://docs.aws.amazon.com/amazonglacier/latest/dev/data-retrieval-policy.html">Amazon Glacier Data
* Retrieval Policies</a>. For more information about the PolicyEnforcedException exception, see <a
* href="http://docs.aws.amazon.com/amazonglacier/latest/dev/api-error-responses.html">Error Responses</a>.
* </p>
* </note></li>
* <li>
* <p>
* After the job completes, download the bytes.
* </p>
* </li>
* </ol>
* <p>
* The retrieval request is executed asynchronously. When you initiate a retrieval job, Amazon Glacier creates a job
* and returns a job ID in the response. When Amazon Glacier completes the job, you can get the job output (archive
* or inventory data). For information about getting job output, see <a>GetJobOutput</a> operation.
* </p>
* <p>
* The job must complete before you can get its output. To determine when a job is complete, you have the following
* options:
* </p>
* <ul>
* <li>
* <p>
* <b>Use Amazon SNS Notification</b> You can specify an Amazon Simple Notification Service (Amazon SNS) topic to
* which Amazon Glacier can post a notification after the job is completed. You can specify an SNS topic per job
* request. The notification is sent only after Amazon Glacier completes the job. In addition to specifying an SNS
* topic per job request, you can configure vault notifications for a vault so that job notifications are always
* sent. For more information, see <a>SetVaultNotifications</a>.
* </p>
* </li>
* <li>
* <p>
* <b>Get job details</b> You can make a <a>DescribeJob</a> request to obtain job status information while a job is
* in progress. However, it is more efficient to use an Amazon SNS notification to determine when a job is complete.
* </p>
* </li>
* </ul>
* <note>
* <p>
* The information you get via notification is same that you get by calling <a>DescribeJob</a>.
* </p>
* </note>
* <p>
* If for a specific event, you add both the notification configuration on the vault and also specify an SNS topic
* in your initiate job request, Amazon Glacier sends both notifications. For more information, see
* <a>SetVaultNotifications</a>.
* </p>
* <p>
* An AWS account has full permission to perform all operations (actions). However, AWS Identity and Access
* Management (IAM) users don't have any permissions by default. You must grant them explicit permission to perform
* specific actions. For more information, see <a
* href="http://docs.aws.amazon.com/amazonglacier/latest/dev/using-iam-with-amazon-glacier.html">Access Control
* Using AWS Identity and Access Management (IAM)</a>.
* </p>
* <p>
* <b>About the Vault Inventory</b>
* </p>
* <p>
* Amazon Glacier prepares an inventory for each vault periodically, every 24 hours. When you initiate a job for a
* vault inventory, Amazon Glacier returns the last inventory for the vault. The inventory data you get might be up
* to a day or two days old. Also, the initiate inventory job might take some time to complete before you can
* download the vault inventory. So you do not want to retrieve a vault inventory for each vault operation. However,
* in some scenarios, you might find the vault inventory useful. For example, when you upload an archive, you can
* provide an archive description but not an archive name. Amazon Glacier provides you a unique archive ID, an
* opaque string of characters. So, you might maintain your own database that maps archive names to their
* corresponding Amazon Glacier assigned archive IDs. You might find the vault inventory useful in the event you
* need to reconcile information in your database with the actual vault inventory.
* </p>
* <p>
* <b>Range Inventory Retrieval</b>
* </p>
* <p>
* You can limit the number of inventory items retrieved by filtering on the archive creation date or by setting a
* limit.
* </p>
* <p>
* <i>Filtering by Archive Creation Date</i>
* </p>
* <p>
* You can retrieve inventory items for archives created between <code>StartDate</code> and <code>EndDate</code> by
* specifying values for these parameters in the <b>InitiateJob</b> request. Archives created on or after the
* <code>StartDate</code> and before the <code>EndDate</code> will be returned. If you only provide the
* <code>StartDate</code> without the <code>EndDate</code>, you will retrieve the inventory for all archives created
* on or after the <code>StartDate</code>. If you only provide the <code>EndDate</code> without the
* <code>StartDate</code>, you will get back the inventory for all archives created before the <code>EndDate</code>.
* </p>
* <p>
* <i>Limiting Inventory Items per Retrieval</i>
* </p>
* <p>
* You can limit the number of inventory items returned by setting the <code>Limit</code> parameter in the
* <b>InitiateJob</b> request. The inventory job output will contain inventory items up to the specified
* <code>Limit</code>. If there are more inventory items available, the result is paginated. After a job is complete
* you can use the <a>DescribeJob</a> operation to get a marker that you use in a subsequent <b>InitiateJob</b>
* request. The marker will indicate the starting point to retrieve the next set of inventory items. You can page
* through your entire inventory by repeatedly making <b>InitiateJob</b> requests with the marker from the previous
* <b>DescribeJob</b> output, until you get a marker from <b>DescribeJob</b> that returns null, indicating that
* there are no more inventory items available.
* </p>
* <p>
* You can use the <code>Limit</code> parameter together with the date range parameters.
* </p>
* <p>
* <b>About Ranged Archive Retrieval</b>
* </p>
* <p>
* You can initiate an archive retrieval for the whole archive or a range of the archive. In the case of ranged
* archive retrieval, you specify a byte range to return or the whole archive. The range specified must be megabyte
* (MB) aligned, that is the range start value must be divisible by 1 MB and range end value plus 1 must be
* divisible by 1 MB or equal the end of the archive. If the ranged archive retrieval is not megabyte aligned, this
* operation returns a 400 response. Furthermore, to ensure you get checksum values for data you download using Get
* Job Output API, the range must be tree hash aligned.
* </p>
* <p>
* An AWS account has full permission to perform all operations (actions). However, AWS Identity and Access
* Management (IAM) users don't have any permissions by default. You must grant them explicit permission to perform
* specific actions. For more information, see <a
* href="http://docs.aws.amazon.com/amazonglacier/latest/dev/using-iam-with-amazon-glacier.html">Access Control
* Using AWS Identity and Access Management (IAM)</a>.
* </p>
* <p>
* For conceptual information and the underlying REST API, see <a
* href="http://docs.aws.amazon.com/amazonglacier/latest/dev/api-initiate-job-post.html">Initiate a Job</a> and <a
* href="http://docs.aws.amazon.com/amazonglacier/latest/dev/vault-inventory.html">Downloading a Vault Inventory</a>
* </p>
* <p>
* <b>Expedited and Bulk Archive Retrievals</b>
* </p>
* <p>
* When retrieving an archive, you can specify one of the following options in the <code>Tier</code> field of the
* request body:
* </p>
* <ul>
* <li>
* <p>
* <b>Standard</b> The default type of retrieval, which allows access to any of your archives within several hours.
* Standard retrievals typically complete within 3–5 hours.
* </p>
* </li>
* <li>
* <p>
* <b>Bulk</b> Amazon Glacier’s lowest-cost retrieval option, which enables you to retrieve large amounts of data
* inexpensively in a day. Bulk retrieval requests typically complete within 5–12 hours.
* </p>
* </li>
* <li>
* <p>
* <b>Expedited</b> Amazon Glacier’s option for the fastest retrievals. Archives requested using the expedited
* retrievals typically become accessible within 1–5 minutes.
* </p>
* </li>
* </ul>
* <p>
* For more information about expedited and bulk retrievals, see <a
* href="http://docs.aws.amazon.com/amazonglacier/latest/dev/downloading-an-archive-two-steps.html">Retrieving
* Amazon Glacier Archives</a>.
* </p>
*
* @param initiateJobRequest
* Provides options for initiating an Amazon Glacier job.
* @return Result of the InitiateJob operation returned by the service.
* @throws ResourceNotFoundException
* Returned if the specified resource (such as a vault, upload ID, or job ID) doesn't exist.
* @throws PolicyEnforcedException
* Returned if a retrieval job would exceed the current data policy's retrieval rate limit. For more
* information about data retrieval policies,
* @throws InvalidParameterValueException
* Returned if a parameter of the request is incorrectly specified.
* @throws MissingParameterValueException
* Returned if a required header or parameter is missing from the request.
* @throws InsufficientCapacityException
* Returned if there is insufficient capacity to process this expedited request. This error only applies to
* expedited retrievals and not to standard or bulk retrievals.
* @throws ServiceUnavailableException
* Returned if the service cannot complete the request.
* @sample AmazonGlacier.InitiateJob
*/
InitiateJobResult initiateJob(InitiateJobRequest initiateJobRequest);
/**
* <p>
* This operation initiates a multipart upload. Amazon Glacier creates a multipart upload resource and returns its
* ID in the response. The multipart upload ID is used in subsequent requests to upload parts of an archive (see
* <a>UploadMultipartPart</a>).
* </p>
* <p>
* When you initiate a multipart upload, you specify the part size in number of bytes. The part size must be a
* megabyte (1024 KB) multiplied by a power of 2-for example, 1048576 (1 MB), 2097152 (2 MB), 4194304 (4 MB),
* 8388608 (8 MB), and so on. The minimum allowable part size is 1 MB, and the maximum is 4 GB.
* </p>
* <p>
* Every part you upload to this resource (see <a>UploadMultipartPart</a>), except the last one, must have the same
* size. The last one can be the same size or smaller. For example, suppose you want to upload a 16.2 MB file. If
* you initiate the multipart upload with a part size of 4 MB, you will upload four parts of 4 MB each and one part
* of 0.2 MB.
* </p>
* <note>
* <p>
* You don't need to know the size of the archive when you start a multipart upload because Amazon Glacier does not
* require you to specify the overall archive size.
* </p>
* </note>
* <p>
* After you complete the multipart upload, Amazon Glacier removes the multipart upload resource referenced by the
* ID. Amazon Glacier also removes the multipart upload resource if you cancel the multipart upload or it may be
* removed if there is no activity for a period of 24 hours.
* </p>
* <p>
* An AWS account has full permission to perform all operations (actions). However, AWS Identity and Access
* Management (IAM) users don't have any permissions by default. You must grant them explicit permission to perform
* specific actions. For more information, see <a
* href="http://docs.aws.amazon.com/amazonglacier/latest/dev/using-iam-with-amazon-glacier.html">Access Control
* Using AWS Identity and Access Management (IAM)</a>.
* </p>
* <p>
* For conceptual information and underlying REST API, see <a
* href="http://docs.aws.amazon.com/amazonglacier/latest/dev/uploading-archive-mpu.html">Uploading Large Archives in
* Parts (Multipart Upload)</a> and <a
* href="http://docs.aws.amazon.com/amazonglacier/latest/dev/api-multipart-initiate-upload.html">Initiate Multipart
* Upload</a> in the <i>Amazon Glacier Developer Guide</i>.
* </p>
*
* @param initiateMultipartUploadRequest
* Provides options for initiating a multipart upload to an Amazon Glacier vault.
* @return Result of the InitiateMultipartUpload operation returned by the service.
* @throws ResourceNotFoundException
* Returned if the specified resource (such as a vault, upload ID, or job ID) doesn't exist.
* @throws InvalidParameterValueException
* Returned if a parameter of the request is incorrectly specified.
* @throws MissingParameterValueException
* Returned if a required header or parameter is missing from the request.
* @throws ServiceUnavailableException
* Returned if the service cannot complete the request.
* @sample AmazonGlacier.InitiateMultipartUpload
*/
InitiateMultipartUploadResult initiateMultipartUpload(InitiateMultipartUploadRequest initiateMultipartUploadRequest);
/**
* <p>
* This operation initiates the vault locking process by doing the following:
* </p>
* <ul>
* <li>
* <p>
* Installing a vault lock policy on the specified vault.
* </p>
* </li>
* <li>
* <p>
* Setting the lock state of vault lock to <code>InProgress</code>.
* </p>
* </li>
* <li>
* <p>
* Returning a lock ID, which is used to complete the vault locking process.
* </p>
* </li>
* </ul>
* <p>
* You can set one vault lock policy for each vault and this policy can be up to 20 KB in size. For more information
* about vault lock policies, see <a
* href="http://docs.aws.amazon.com/amazonglacier/latest/dev/vault-lock-policy.html">Amazon Glacier Access Control
* with Vault Lock Policies</a>.
* </p>
* <p>
* You must complete the vault locking process within 24 hours after the vault lock enters the
* <code>InProgress</code> state. After the 24 hour window ends, the lock ID expires, the vault automatically exits
* the <code>InProgress</code> state, and the vault lock policy is removed from the vault. You call
* <a>CompleteVaultLock</a> to complete the vault locking process by setting the state of the vault lock to
* <code>Locked</code>.
* </p>
* <p>
* After a vault lock is in the <code>Locked</code> state, you cannot initiate a new vault lock for the vault.
* </p>
* <p>
* You can abort the vault locking process by calling <a>AbortVaultLock</a>. You can get the state of the vault lock
* by calling <a>GetVaultLock</a>. For more information about the vault locking process, <a
* href="http://docs.aws.amazon.com/amazonglacier/latest/dev/vault-lock.html">Amazon Glacier Vault Lock</a>.
* </p>
* <p>
* If this operation is called when the vault lock is in the <code>InProgress</code> state, the operation returns an
* <code>AccessDeniedException</code> error. When the vault lock is in the <code>InProgress</code> state you must
* call <a>AbortVaultLock</a> before you can initiate a new vault lock policy.
* </p>
*
* @param initiateVaultLockRequest
* The input values for <code>InitiateVaultLock</code>.
* @return Result of the InitiateVaultLock operation returned by the service.
* @throws ResourceNotFoundException
* Returned if the specified resource (such as a vault, upload ID, or job ID) doesn't exist.
* @throws InvalidParameterValueException
* Returned if a parameter of the request is incorrectly specified.
* @throws MissingParameterValueException
* Returned if a required header or parameter is missing from the request.
* @throws ServiceUnavailableException
* Returned if the service cannot complete the request.
* @sample AmazonGlacier.InitiateVaultLock
*/
InitiateVaultLockResult initiateVaultLock(InitiateVaultLockRequest initiateVaultLockRequest);
/**
* <p>
* This operation lists jobs for a vault, including jobs that are in-progress and jobs that have recently finished.
* </p>
* <note>
* <p>
* Amazon Glacier retains recently completed jobs for a period before deleting them; however, it eventually removes
* completed jobs. The output of completed jobs can be retrieved. Retaining completed jobs for a period of time
* after they have completed enables you to get a job output in the event you miss the job completion notification
* or your first attempt to download it fails. For example, suppose you start an archive retrieval job to download
* an archive. After the job completes, you start to download the archive but encounter a network error. In this
* scenario, you can retry and download the archive while the job exists.
* </p>
* </note>
* <p>
* To retrieve an archive or retrieve a vault inventory from Amazon Glacier, you first initiate a job, and after the
* job completes, you download the data. For an archive retrieval, the output is the archive data. For an inventory
* retrieval, it is the inventory list. The List Job operation returns a list of these jobs sorted by job initiation
* time.
* </p>
* <p>
* The List Jobs operation supports pagination. You should always check the response <code>Marker</code> field. If
* there are no more jobs to list, the <code>Marker</code> field is set to <code>null</code>. If there are more jobs
* to list, the <code>Marker</code> field is set to a non-null value, which you can use to continue the pagination
* of the list. To return a list of jobs that begins at a specific job, set the marker request parameter to the
* <code>Marker</code> value for that job that you obtained from a previous List Jobs request.
* </p>
* <p>
* You can set a maximum limit for the number of jobs returned in the response by specifying the <code>limit</code>
* parameter in the request. The default limit is 1000. The number of jobs returned might be fewer than the limit,
* but the number of returned jobs never exceeds the limit.
* </p>
* <p>
* Additionally, you can filter the jobs list returned by specifying the optional <code>statuscode</code> parameter
* or <code>completed</code> parameter, or both. Using the <code>statuscode</code> parameter, you can specify to
* return only jobs that match either the <code>InProgress</code>, <code>Succeeded</code>, or <code>Failed</code>
* status. Using the <code>completed</code> parameter, you can specify to return only jobs that were completed (
* <code>true</code>) or jobs that were not completed (<code>false</code>).
* </p>
* <p>
* For the underlying REST API, see <a
* href="http://docs.aws.amazon.com/amazonglacier/latest/dev/api-jobs-get.html">List Jobs</a>.
* </p>
*
* @param listJobsRequest
* Provides options for retrieving a job list for an Amazon Glacier vault.
* @return Result of the ListJobs operation returned by the service.
* @throws ResourceNotFoundException
* Returned if the specified resource (such as a vault, upload ID, or job ID) doesn't exist.
* @throws InvalidParameterValueException
* Returned if a parameter of the request is incorrectly specified.
* @throws MissingParameterValueException
* Returned if a required header or parameter is missing from the request.
* @throws ServiceUnavailableException
* Returned if the service cannot complete the request.
* @sample AmazonGlacier.ListJobs
*/
ListJobsResult listJobs(ListJobsRequest listJobsRequest);
/**
* <p>
* This operation lists in-progress multipart uploads for the specified vault. An in-progress multipart upload is a
* multipart upload that has been initiated by an <a>InitiateMultipartUpload</a> request, but has not yet been
* completed or aborted. The list returned in the List Multipart Upload response has no guaranteed order.
* </p>
* <p>
* The List Multipart Uploads operation supports pagination. By default, this operation returns up to 1,000
* multipart uploads in the response. You should always check the response for a <code>marker</code> at which to
* continue the list; if there are no more items the <code>marker</code> is <code>null</code>. To return a list of
* multipart uploads that begins at a specific upload, set the <code>marker</code> request parameter to the value
* you obtained from a previous List Multipart Upload request. You can also limit the number of uploads returned in
* the response by specifying the <code>limit</code> parameter in the request.
* </p>
* <p>
* Note the difference between this operation and listing parts (<a>ListParts</a>). The List Multipart Uploads
* operation lists all multipart uploads for a vault and does not require a multipart upload ID. The List Parts
* operation requires a multipart upload ID since parts are associated with a single upload.
* </p>
* <p>
* An AWS account has full permission to perform all operations (actions). However, AWS Identity and Access
* Management (IAM) users don't have any permissions by default. You must grant them explicit permission to perform
* specific actions. For more information, see <a
* href="http://docs.aws.amazon.com/amazonglacier/latest/dev/using-iam-with-amazon-glacier.html">Access Control
* Using AWS Identity and Access Management (IAM)</a>.
* </p>
* <p>
* For conceptual information and the underlying REST API, see <a
* href="http://docs.aws.amazon.com/amazonglacier/latest/dev/working-with-archives.html">Working with Archives in
* Amazon Glacier</a> and <a
* href="http://docs.aws.amazon.com/amazonglacier/latest/dev/api-multipart-list-uploads.html">List Multipart Uploads
* </a> in the <i>Amazon Glacier Developer Guide</i>.
* </p>
*
* @param listMultipartUploadsRequest
* Provides options for retrieving list of in-progress multipart uploads for an Amazon Glacier vault.
* @return Result of the ListMultipartUploads operation returned by the service.
* @throws ResourceNotFoundException
* Returned if the specified resource (such as a vault, upload ID, or job ID) doesn't exist.
* @throws InvalidParameterValueException
* Returned if a parameter of the request is incorrectly specified.
* @throws MissingParameterValueException
* Returned if a required header or parameter is missing from the request.
* @throws ServiceUnavailableException
* Returned if the service cannot complete the request.
* @sample AmazonGlacier.ListMultipartUploads
*/
ListMultipartUploadsResult listMultipartUploads(ListMultipartUploadsRequest listMultipartUploadsRequest);
/**
* <p>
* This operation lists the parts of an archive that have been uploaded in a specific multipart upload. You can make
* this request at any time during an in-progress multipart upload before you complete the upload (see
* <a>CompleteMultipartUpload</a>. List Parts returns an error for completed uploads. The list returned in the List
* Parts response is sorted by part range.
* </p>
* <p>
* The List Parts operation supports pagination. By default, this operation returns up to 1,000 uploaded parts in
* the response. You should always check the response for a <code>marker</code> at which to continue the list; if
* there are no more items the <code>marker</code> is <code>null</code>. To return a list of parts that begins at a
* specific part, set the <code>marker</code> request parameter to the value you obtained from a previous List Parts
* request. You can also limit the number of parts returned in the response by specifying the <code>limit</code>
* parameter in the request.
* </p>
* <p>
* An AWS account has full permission to perform all operations (actions). However, AWS Identity and Access
* Management (IAM) users don't have any permissions by default. You must grant them explicit permission to perform
* specific actions. For more information, see <a
* href="http://docs.aws.amazon.com/amazonglacier/latest/dev/using-iam-with-amazon-glacier.html">Access Control
* Using AWS Identity and Access Management (IAM)</a>.
* </p>
* <p>
* For conceptual information and the underlying REST API, see <a
* href="http://docs.aws.amazon.com/amazonglacier/latest/dev/working-with-archives.html">Working with Archives in
* Amazon Glacier</a> and <a
* href="http://docs.aws.amazon.com/amazonglacier/latest/dev/api-multipart-list-parts.html">List Parts</a> in the
* <i>Amazon Glacier Developer Guide</i>.
* </p>
*
* @param listPartsRequest
* Provides options for retrieving a list of parts of an archive that have been uploaded in a specific
* multipart upload.
* @return Result of the ListParts operation returned by the service.
* @throws ResourceNotFoundException
* Returned if the specified resource (such as a vault, upload ID, or job ID) doesn't exist.
* @throws InvalidParameterValueException
* Returned if a parameter of the request is incorrectly specified.
* @throws MissingParameterValueException
* Returned if a required header or parameter is missing from the request.
* @throws ServiceUnavailableException
* Returned if the service cannot complete the request.
* @sample AmazonGlacier.ListParts
*/
ListPartsResult listParts(ListPartsRequest listPartsRequest);
/**
* <p>
* This operation lists the provisioned capacity for the specified AWS account.
* </p>
*
* @param listProvisionedCapacityRequest
* @return Result of the ListProvisionedCapacity operation returned by the service.
* @throws InvalidParameterValueException
* Returned if a parameter of the request is incorrectly specified.
* @throws MissingParameterValueException
* Returned if a required header or parameter is missing from the request.
* @throws ServiceUnavailableException
* Returned if the service cannot complete the request.
* @sample AmazonGlacier.ListProvisionedCapacity
*/
ListProvisionedCapacityResult listProvisionedCapacity(ListProvisionedCapacityRequest listProvisionedCapacityRequest);
/**
* <p>
* This operation lists all the tags attached to a vault. The operation returns an empty map if there are no tags.
* For more information about tags, see <a
* href="http://docs.aws.amazon.com/amazonglacier/latest/dev/tagging.html">Tagging Amazon Glacier Resources</a>.
* </p>
*
* @param listTagsForVaultRequest
* The input value for <code>ListTagsForVaultInput</code>.
* @return Result of the ListTagsForVault operation returned by the service.
* @throws InvalidParameterValueException
* Returned if a parameter of the request is incorrectly specified.
* @throws MissingParameterValueException
* Returned if a required header or parameter is missing from the request.
* @throws ResourceNotFoundException
* Returned if the specified resource (such as a vault, upload ID, or job ID) doesn't exist.
* @throws ServiceUnavailableException
* Returned if the service cannot complete the request.
* @sample AmazonGlacier.ListTagsForVault
*/
ListTagsForVaultResult listTagsForVault(ListTagsForVaultRequest listTagsForVaultRequest);
/**
* <p>
* This operation lists all vaults owned by the calling user's account. The list returned in the response is
* ASCII-sorted by vault name.
* </p>
* <p>
* By default, this operation returns up to 1,000 items. If there are more vaults to list, the response
* <code>marker</code> field contains the vault Amazon Resource Name (ARN) at which to continue the list with a new
* List Vaults request; otherwise, the <code>marker</code> field is <code>null</code>. To return a list of vaults
* that begins at a specific vault, set the <code>marker</code> request parameter to the vault ARN you obtained from
* a previous List Vaults request. You can also limit the number of vaults returned in the response by specifying
* the <code>limit</code> parameter in the request.
* </p>
* <p>
* An AWS account has full permission to perform all operations (actions). However, AWS Identity and Access
* Management (IAM) users don't have any permissions by default. You must grant them explicit permission to perform
* specific actions. For more information, see <a
* href="http://docs.aws.amazon.com/amazonglacier/latest/dev/using-iam-with-amazon-glacier.html">Access Control
* Using AWS Identity and Access Management (IAM)</a>.
* </p>
* <p>
* For conceptual information and underlying REST API, see <a
* href="http://docs.aws.amazon.com/amazonglacier/latest/dev/retrieving-vault-info.html">Retrieving Vault Metadata
* in Amazon Glacier</a> and <a href="http://docs.aws.amazon.com/amazonglacier/latest/dev/api-vaults-get.html">List
* Vaults </a> in the <i>Amazon Glacier Developer Guide</i>.
* </p>
*
* @param listVaultsRequest
* Provides options to retrieve the vault list owned by the calling user's account. The list provides
* metadata information for each vault.
* @return Result of the ListVaults operation returned by the service.
* @throws ResourceNotFoundException
* Returned if the specified resource (such as a vault, upload ID, or job ID) doesn't exist.
* @throws InvalidParameterValueException
* Returned if a parameter of the request is incorrectly specified.
* @throws MissingParameterValueException
* Returned if a required header or parameter is missing from the request.
* @throws ServiceUnavailableException
* Returned if the service cannot complete the request.
* @sample AmazonGlacier.ListVaults
*/
ListVaultsResult listVaults(ListVaultsRequest listVaultsRequest);
/**
* <p>
* This operation purchases a provisioned capacity unit for an AWS account.
* </p>
*
* @param purchaseProvisionedCapacityRequest
* @return Result of the PurchaseProvisionedCapacity operation returned by the service.
* @throws InvalidParameterValueException
* Returned if a parameter of the request is incorrectly specified.
* @throws MissingParameterValueException
* Returned if a required header or parameter is missing from the request.
* @throws LimitExceededException
* Returned if the request results in a vault or account limit being exceeded.
* @throws ServiceUnavailableException
* Returned if the service cannot complete the request.
* @sample AmazonGlacier.PurchaseProvisionedCapacity
*/
PurchaseProvisionedCapacityResult purchaseProvisionedCapacity(PurchaseProvisionedCapacityRequest purchaseProvisionedCapacityRequest);
/**
* <p>
* This operation removes one or more tags from the set of tags attached to a vault. For more information about
* tags, see <a href="http://docs.aws.amazon.com/amazonglacier/latest/dev/tagging.html">Tagging Amazon Glacier
* Resources</a>. This operation is idempotent. The operation will be successful, even if there are no tags attached
* to the vault.
* </p>
*
* @param removeTagsFromVaultRequest
* The input value for <code>RemoveTagsFromVaultInput</code>.
* @return Result of the RemoveTagsFromVault operation returned by the service.
* @throws InvalidParameterValueException
* Returned if a parameter of the request is incorrectly specified.
* @throws MissingParameterValueException
* Returned if a required header or parameter is missing from the request.
* @throws ResourceNotFoundException
* Returned if the specified resource (such as a vault, upload ID, or job ID) doesn't exist.
* @throws ServiceUnavailableException
* Returned if the service cannot complete the request.
* @sample AmazonGlacier.RemoveTagsFromVault
*/
RemoveTagsFromVaultResult removeTagsFromVault(RemoveTagsFromVaultRequest removeTagsFromVaultRequest);
/**
* <p>
* This operation sets and then enacts a data retrieval policy in the region specified in the PUT request. You can
* set one policy per region for an AWS account. The policy is enacted within a few minutes of a successful PUT
* operation.
* </p>
* <p>
* The set policy operation does not affect retrieval jobs that were in progress before the policy was enacted. For
* more information about data retrieval policies, see <a
* href="http://docs.aws.amazon.com/amazonglacier/latest/dev/data-retrieval-policy.html">Amazon Glacier Data
* Retrieval Policies</a>.
* </p>
*
* @param setDataRetrievalPolicyRequest
* SetDataRetrievalPolicy input.
* @return Result of the SetDataRetrievalPolicy operation returned by the service.
* @throws InvalidParameterValueException
* Returned if a parameter of the request is incorrectly specified.
* @throws MissingParameterValueException
* Returned if a required header or parameter is missing from the request.
* @throws ServiceUnavailableException
* Returned if the service cannot complete the request.
* @sample AmazonGlacier.SetDataRetrievalPolicy
*/
SetDataRetrievalPolicyResult setDataRetrievalPolicy(SetDataRetrievalPolicyRequest setDataRetrievalPolicyRequest);
/**
* <p>
* This operation configures an access policy for a vault and will overwrite an existing policy. To configure a
* vault access policy, send a PUT request to the <code>access-policy</code> subresource of the vault. An access
* policy is specific to a vault and is also called a vault subresource. You can set one access policy per vault and
* the policy can be up to 20 KB in size. For more information about vault access policies, see <a
* href="http://docs.aws.amazon.com/amazonglacier/latest/dev/vault-access-policy.html">Amazon Glacier Access Control
* with Vault Access Policies</a>.
* </p>
*
* @param setVaultAccessPolicyRequest
* SetVaultAccessPolicy input.
* @return Result of the SetVaultAccessPolicy operation returned by the service.
* @throws ResourceNotFoundException
* Returned if the specified resource (such as a vault, upload ID, or job ID) doesn't exist.
* @throws InvalidParameterValueException
* Returned if a parameter of the request is incorrectly specified.
* @throws MissingParameterValueException
* Returned if a required header or parameter is missing from the request.
* @throws ServiceUnavailableException
* Returned if the service cannot complete the request.
* @sample AmazonGlacier.SetVaultAccessPolicy
*/
SetVaultAccessPolicyResult setVaultAccessPolicy(SetVaultAccessPolicyRequest setVaultAccessPolicyRequest);
/**
* <p>
* This operation configures notifications that will be sent when specific events happen to a vault. By default, you
* don't get any notifications.
* </p>
* <p>
* To configure vault notifications, send a PUT request to the <code>notification-configuration</code> subresource
* of the vault. The request should include a JSON document that provides an Amazon SNS topic and specific events
* for which you want Amazon Glacier to send notifications to the topic.
* </p>
* <p>
* Amazon SNS topics must grant permission to the vault to be allowed to publish notifications to the topic. You can
* configure a vault to publish a notification for the following vault events:
* </p>
* <ul>
* <li>
* <p>
* <b>ArchiveRetrievalCompleted</b> This event occurs when a job that was initiated for an archive retrieval is
* completed (<a>InitiateJob</a>). The status of the completed job can be "Succeeded" or "Failed". The notification
* sent to the SNS topic is the same output as returned from <a>DescribeJob</a>.
* </p>
* </li>
* <li>
* <p>
* <b>InventoryRetrievalCompleted</b> This event occurs when a job that was initiated for an inventory retrieval is
* completed (<a>InitiateJob</a>). The status of the completed job can be "Succeeded" or "Failed". The notification
* sent to the SNS topic is the same output as returned from <a>DescribeJob</a>.
* </p>
* </li>
* </ul>
* <p>
* An AWS account has full permission to perform all operations (actions). However, AWS Identity and Access
* Management (IAM) users don't have any permissions by default. You must grant them explicit permission to perform
* specific actions. For more information, see <a
* href="http://docs.aws.amazon.com/amazonglacier/latest/dev/using-iam-with-amazon-glacier.html">Access Control
* Using AWS Identity and Access Management (IAM)</a>.
* </p>
* <p>
* For conceptual information and underlying REST API, see <a
* href="http://docs.aws.amazon.com/amazonglacier/latest/dev/configuring-notifications.html">Configuring Vault
* Notifications in Amazon Glacier</a> and <a
* href="http://docs.aws.amazon.com/amazonglacier/latest/dev/api-vault-notifications-put.html">Set Vault
* Notification Configuration </a> in the <i>Amazon Glacier Developer Guide</i>.
* </p>
*
* @param setVaultNotificationsRequest
* Provides options to configure notifications that will be sent when specific events happen to a vault.
* @return Result of the SetVaultNotifications operation returned by the service.
* @throws ResourceNotFoundException
* Returned if the specified resource (such as a vault, upload ID, or job ID) doesn't exist.
* @throws InvalidParameterValueException
* Returned if a parameter of the request is incorrectly specified.
* @throws MissingParameterValueException
* Returned if a required header or parameter is missing from the request.
* @throws ServiceUnavailableException
* Returned if the service cannot complete the request.
* @sample AmazonGlacier.SetVaultNotifications
*/
SetVaultNotificationsResult setVaultNotifications(SetVaultNotificationsRequest setVaultNotificationsRequest);
/**
* <p>
* This operation adds an archive to a vault. This is a synchronous operation, and for a successful upload, your
* data is durably persisted. Amazon Glacier returns the archive ID in the <code>x-amz-archive-id</code> header of
* the response.
* </p>
* <p>
* You must use the archive ID to access your data in Amazon Glacier. After you upload an archive, you should save
* the archive ID returned so that you can retrieve or delete the archive later. Besides saving the archive ID, you
* can also index it and give it a friendly name to allow for better searching. You can also use the optional
* archive description field to specify how the archive is referred to in an external index of archives, such as you
* might create in Amazon DynamoDB. You can also get the vault inventory to obtain a list of archive IDs in a vault.
* For more information, see <a>InitiateJob</a>.
* </p>
* <p>
* You must provide a SHA256 tree hash of the data you are uploading. For information about computing a SHA256 tree
* hash, see <a href="http://docs.aws.amazon.com/amazonglacier/latest/dev/checksum-calculations.html">Computing
* Checksums</a>.
* </p>
* <p>
* You can optionally specify an archive description of up to 1,024 printable ASCII characters. You can get the
* archive description when you either retrieve the archive or get the vault inventory. For more information, see
* <a>InitiateJob</a>. Amazon Glacier does not interpret the description in any way. An archive description does not
* need to be unique. You cannot use the description to retrieve or sort the archive list.
* </p>
* <p>
* Archives are immutable. After you upload an archive, you cannot edit the archive or its description.
* </p>
* <p>
* An AWS account has full permission to perform all operations (actions). However, AWS Identity and Access
* Management (IAM) users don't have any permissions by default. You must grant them explicit permission to perform
* specific actions. For more information, see <a
* href="http://docs.aws.amazon.com/amazonglacier/latest/dev/using-iam-with-amazon-glacier.html">Access Control
* Using AWS Identity and Access Management (IAM)</a>.
* </p>
* <p>
* For conceptual information and underlying REST API, see <a
* href="http://docs.aws.amazon.com/amazonglacier/latest/dev/uploading-an-archive.html">Uploading an Archive in
* Amazon Glacier</a> and <a href="http://docs.aws.amazon.com/amazonglacier/latest/dev/api-archive-post.html">Upload
* Archive</a> in the <i>Amazon Glacier Developer Guide</i>.
* </p>
*
* @param uploadArchiveRequest
* Provides options to add an archive to a vault.
* @return Result of the UploadArchive operation returned by the service.
* @throws ResourceNotFoundException
* Returned if the specified resource (such as a vault, upload ID, or job ID) doesn't exist.
* @throws InvalidParameterValueException
* Returned if a parameter of the request is incorrectly specified.
* @throws MissingParameterValueException
* Returned if a required header or parameter is missing from the request.
* @throws RequestTimeoutException
* Returned if, when uploading an archive, Amazon Glacier times out while receiving the upload.
* @throws ServiceUnavailableException
* Returned if the service cannot complete the request.
* @sample AmazonGlacier.UploadArchive
*/
UploadArchiveResult uploadArchive(UploadArchiveRequest uploadArchiveRequest);
/**
* <p>
* This operation uploads a part of an archive. You can upload archive parts in any order. You can also upload them
* in parallel. You can upload up to 10,000 parts for a multipart upload.
* </p>
* <p>
* Amazon Glacier rejects your upload part request if any of the following conditions is true:
* </p>
* <ul>
* <li>
* <p>
* <b>SHA256 tree hash does not match</b>To ensure that part data is not corrupted in transmission, you compute a
* SHA256 tree hash of the part and include it in your request. Upon receiving the part data, Amazon Glacier also
* computes a SHA256 tree hash. If these hash values don't match, the operation fails. For information about
* computing a SHA256 tree hash, see <a
* href="http://docs.aws.amazon.com/amazonglacier/latest/dev/checksum-calculations.html">Computing Checksums</a>.
* </p>
* </li>
* <li>
* <p>
* <b>Part size does not match</b>The size of each part except the last must match the size specified in the
* corresponding <a>InitiateMultipartUpload</a> request. The size of the last part must be the same size as, or
* smaller than, the specified size.
* </p>
* <note>
* <p>
* If you upload a part whose size is smaller than the part size you specified in your initiate multipart upload
* request and that part is not the last part, then the upload part request will succeed. However, the subsequent
* Complete Multipart Upload request will fail.
* </p>
* </note></li>
* <li>
* <p>
* <b>Range does not align</b>The byte range value in the request does not align with the part size specified in the
* corresponding initiate request. For example, if you specify a part size of 4194304 bytes (4 MB), then 0 to
* 4194303 bytes (4 MB - 1) and 4194304 (4 MB) to 8388607 (8 MB - 1) are valid part ranges. However, if you set a
* range value of 2 MB to 6 MB, the range does not align with the part size and the upload will fail.
* </p>
* </li>
* </ul>
* <p>
* This operation is idempotent. If you upload the same part multiple times, the data included in the most recent
* request overwrites the previously uploaded data.
* </p>
* <p>
* An AWS account has full permission to perform all operations (actions). However, AWS Identity and Access
* Management (IAM) users don't have any permissions by default. You must grant them explicit permission to perform
* specific actions. For more information, see <a
* href="http://docs.aws.amazon.com/amazonglacier/latest/dev/using-iam-with-amazon-glacier.html">Access Control
* Using AWS Identity and Access Management (IAM)</a>.
* </p>
* <p>
* For conceptual information and underlying REST API, see <a
* href="http://docs.aws.amazon.com/amazonglacier/latest/dev/uploading-archive-mpu.html">Uploading Large Archives in
* Parts (Multipart Upload)</a> and <a
* href="http://docs.aws.amazon.com/amazonglacier/latest/dev/api-upload-part.html">Upload Part </a> in the <i>Amazon
* Glacier Developer Guide</i>.
* </p>
*
* @param uploadMultipartPartRequest
* Provides options to upload a part of an archive in a multipart upload operation.
* @return Result of the UploadMultipartPart operation returned by the service.
* @throws ResourceNotFoundException
* Returned if the specified resource (such as a vault, upload ID, or job ID) doesn't exist.
* @throws InvalidParameterValueException
* Returned if a parameter of the request is incorrectly specified.
* @throws MissingParameterValueException
* Returned if a required header or parameter is missing from the request.
* @throws RequestTimeoutException
* Returned if, when uploading an archive, Amazon Glacier times out while receiving the upload.
* @throws ServiceUnavailableException
* Returned if the service cannot complete the request.
* @sample AmazonGlacier.UploadMultipartPart
*/
UploadMultipartPartResult uploadMultipartPart(UploadMultipartPartRequest uploadMultipartPartRequest);
/**
* Shuts down this client object, releasing any resources that might be held open. This is an optional method, and
* callers are not expected to call it, but can if they want to explicitly release any open resources. Once a client
* has been shutdown, it should not be used to make any more requests.
*/
void shutdown();
/**
* Returns additional metadata for a previously executed successful request, typically used for debugging issues
* where a service isn't acting as expected. This data isn't considered part of the result data returned by an
* operation, so it's available through this separate, diagnostic interface.
* <p>
* Response metadata is only cached for a limited period of time, so if you need to access this extra diagnostic
* information for an executed request, you should use this method to retrieve it as soon as possible after
* executing a request.
*
* @param request
* The originally executed request.
*
* @return The response metadata for the specified request, or null if none is available.
*/
ResponseMetadata getCachedResponseMetadata(AmazonWebServiceRequest request);
AmazonGlacierWaiters waiters();
}