/**
* Copyright (c) 2010-2016 by the respective copyright holders.
*
* All rights reserved. This program and the accompanying materials
* are made available under the terms of the Eclipse Public License v1.0
* which accompanies this distribution, and is available at
* http://www.eclipse.org/legal/epl-v10.html
*/
/**
Hardware Limit Switches :
Using bistable switches for identification of open and close position
#define Souliss_T2n_LimSwitch_Close 0x08
#define Souliss_T2n_LimSwitch_Open 0x10
Hardware and/or Software Command:
Using a monostable wall switch (press and spring return) or a
software command from user interface, each press will toogle
the output status.
#define Souliss_T2n_CloseCmd_Local 0x08
#define Souliss_T2n_OpenCmd_Local 0x10
#define Souliss_T2n_StopCmd 0x04
Following constant are defined for sketch source compatibility with versions < A6.1.1
and their use is now deprecated.
#define Souliss_T2n_CloseCmd 0x01
#define Souliss_T2n_OpenCmd 0x02
This commands are designed to be used by an application (Souliss App, OpenHAB binding, user applications)
in order to support software "scenario". When the Open/Close command is recevived it is always excuted;
if the motor is running opposite direction it stops for 4 cycles then it revert motion.
#define Souliss_T2n_CloseCmd_SW 0x01
#define Souliss_T2n_OpenCmd_SW 0x02
#define Souliss_T2n_StopCmd 0x03
Command recap, using:
- 0x01(hex) as command, Software CLOSE request (stop 4 cycles if opening)
- 0x02(hex) as command, Software OPEN request (stop 4 cycles if closing)
- 0x04(hex) as command, STOP request
- 0x08(hex) as command, CLOSE request (stop if opening)
- 0x10(hex) as command, OPEN request (stop if closing)
Output status:
- 1(hex) for CLOSE,
- 2(hex) for OPEN,
- 3(hex) for STOP. * Copyright (c) 2010-2015, openHAB.org and others.
*
* All rights reserved. This program and the accompanying materials
* are made available under the terms of the Eclipse Public License v1.0
* which accompanies this distribution, and is available at
* http://www.eclipse.org/legal/epl-v10.html
*/
package org.openhab.binding.souliss.internal.network.typicals;
import java.net.DatagramSocket;
import org.openhab.core.types.State;
/**
* Typical T22 Motorized devices with limit switches and middle position
* floating point
*
* @author Tonino Fazio
* @since 1.7.0
*/
public class SoulissT21 extends SoulissT22 {
@Override
public void commandSEND(short command) {
super.commandSEND(command);
}
@Override
public State getOHState() {
return super.getOHState();
}
public SoulissT21(DatagramSocket _datagramsocket, String sSoulissNodeIPAddressOnLAN, int iIDNodo, int iSlot,
String sOHType) {
super(_datagramsocket, sSoulissNodeIPAddressOnLAN, iIDNodo, iSlot, sOHType);
this.setType(Constants.Souliss_T21);
}
}