/*
* Copyright 2010-2016 Amazon.com, Inc. or its affiliates. All Rights Reserved.
*
* Licensed under the Apache License, Version 2.0 (the "License").
* You may not use this file except in compliance with the License.
* A copy of the License is located at
*
* http://aws.amazon.com/apache2.0
*
* or in the "license" file accompanying this file. This file is distributed
* on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either
* express or implied. See the License for the specific language governing
* permissions and limitations under the License.
*/
package com.amazonaws.services.sqs.model;
import java.io.Serializable;
import com.amazonaws.AmazonWebServiceRequest;
/**
* <p>
* Delivers a message to the specified queue.
* </p>
* <important>
* <p>
* The following list shows the characters (in Unicode) that are allowed in your
* message, according to the W3C XML specification:
* </p>
* <p>
* <code>#x9</code> | <code>#xA</code> | <code>#xD</code> | [<code>#x20</code>
* to <code>#xD7FF</code>] | [<code>#xE000</code> to <code>#xFFFD</code>] | [
* <code>#x10000</code> to <code>#x10FFFF</code>]
* </p>
* <p>
* For more information, see <a
* href="https://www.ietf.org/rfc/rfc1321.txt">RFC1321</a>. If you send any
* characters that aren't included in this list, your request will be rejected.
* </p>
* </important>
*/
public class SendMessageRequest extends AmazonWebServiceRequest implements Serializable {
/**
* <p>
* The URL of the Amazon SQS queue to take action on.
* </p>
* <p>
* Queue URLs are case-sensitive.
* </p>
*/
private String queueUrl;
/**
* <p>
* The message to send. String maximum 256 KB in size. For a list of allowed
* characters, see the preceding note.
* </p>
*/
private String messageBody;
/**
* <p>
* The number of seconds (0 to 900 - 15 minutes) to delay a specific
* message. Messages with a positive <code>DelaySeconds</code> value become
* available for processing after the delay time is finished. If you don't
* specify a value, the default value for the queue applies.
* </p>
* <note>
* <p>
* When you set <code>FifoQueue</code>, you can't set
* <code>DelaySeconds</code> per message. You can set this parameter only on
* a queue level.
* </p>
* </note>
*/
private Integer delaySeconds;
/**
* <p>
* Each message attribute consists of a Name, Type, and Value. For more
* information, see <a href=
* "http://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/SQSMessageAttributes.html#SQSMessageAttributesNTV"
* >Message Attribute Items</a> in the <i>Amazon SQS Developer Guide</i>.
* </p>
*/
private java.util.Map<String, MessageAttributeValue> messageAttributes = new java.util.HashMap<String, MessageAttributeValue>();
/**
* <p>
* This parameter applies only to FIFO (first-in-first-out) queues.
* </p>
* <p>
* The token used for deduplication of sent messages. If a message with a
* particular <code>MessageDeduplicationId</code> is sent successfully, any
* messages sent with the same <code>MessageDeduplicationId</code> are
* accepted successfully but aren't delivered during the 5-minute
* deduplication interval. For more information, see <a href=
* "http://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/FIFO-queues.html#FIFO-queues-exactly-once-processing"
* > Exactly-Once Processing</a> in the <i>Amazon SQS Developer Guide</i>.
* </p>
* <ul>
* <li>
* <p>
* Every message must have a unique <code>MessageDeduplicationId</code>,
* </p>
* <ul>
* <li>
* <p>
* You may provide a <code>MessageDeduplicationId</code> explicitly.
* </p>
* </li>
* <li>
* <p>
* If you aren't able to provide a <code>MessageDeduplicationId</code> and
* you enable <code>ContentBasedDeduplication</code> for your queue, Amazon
* SQS uses a SHA-256 hash to generate the
* <code>MessageDeduplicationId</code> using the body of the message (but
* not the attributes of the message).
* </p>
* </li>
* <li>
* <p>
* If you don't provide a <code>MessageDeduplicationId</code> and the queue
* doesn't have <code>ContentBasedDeduplication</code> set, the action fails
* with an error.
* </p>
* </li>
* <li>
* <p>
* If the queue has <code>ContentBasedDeduplication</code> set, your
* <code>MessageDeduplicationId</code> overrides the generated one.
* </p>
* </li>
* </ul>
* </li>
* <li>
* <p>
* When <code>ContentBasedDeduplication</code> is in effect, messages with
* identical content sent within the deduplication interval are treated as
* duplicates and only one copy of the message is delivered.
* </p>
* </li>
* <li>
* <p>
* You can also use <code>ContentBasedDeduplication</code> for messages with
* identical content to be treated as duplicates.
* </p>
* </li>
* <li>
* <p>
* If you send one message with <code>ContentBasedDeduplication</code>
* enabled and then another message with a
* <code>MessageDeduplicationId</code> that is the same as the one generated
* for the first <code>MessageDeduplicationId</code>, the two messages are
* treated as duplicates and only one copy of the message is delivered.
* </p>
* </li>
* </ul>
* <note>
* <p>
* The <code>MessageDeduplicationId</code> is available to the recipient of
* the message (this can be useful for troubleshooting delivery issues).
* </p>
* <p>
* If a message is sent successfully but the acknowledgdment is lost and the
* message is resent with the same <code>MessageDeduplicationId</code> after
* the deduplication interval, Amazon SQS can't detect duplicate messages.
* </p>
* </note>
* <p>
* The length of <code>MessageDeduplicationId</code> is 128 characters.
* <code>MessageDeduplicationId</code> can contain alphanumeric characters (
* <code>a-z</code>, <code>A-Z</code>, <code>0-9</code>) and punctuation (
* <code>!"#$%&'()*+,-./:;<=>?@[\]^_`{|}~</code>).
* </p>
* <p>
* For best practices of using <code>MessageDeduplicationId</code>, see <a
* href=
* "http://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/FIFO-queue-recommendations.html#using-messagededuplicationid-property"
* >Using the MessageDeduplicationId Property</a> in the <i>Amazon Simple
* Queue Service Developer Guide</i>.
* </p>
*/
private String messageDeduplicationId;
/**
* <p>
* This parameter applies only to FIFO (first-in-first-out) queues.
* </p>
* <p>
* The tag that specifies that a message belongs to a specific message
* group. Messages that belong to the same message group are processed in a
* FIFO manner (however, messages in different message groups might be
* processed out of order). To interleave multiple ordered streams within a
* single queue, use <code>MessageGroupId</code> values (for example,
* session data for multiple users). In this scenario, multiple readers can
* process the queue, but the session data of each user is processed in a
* FIFO fashion.
* </p>
* <ul>
* <li>
* <p>
* You must associate a non-empty <code>MessageGroupId</code> with a
* message. If you don't provide a <code>MessageGroupId</code>, the action
* fails.
* </p>
* </li>
* <li>
* <p>
* <code>ReceiveMessage</code> might return messages with multiple
* <code>MessageGroupId</code> values. For each <code>MessageGroupId</code>,
* the messages are sorted by time sent. The caller can't specify a
* <code>MessageGroupId</code>.
* </p>
* </li>
* </ul>
* <p>
* The length of <code>MessageGroupId</code> is 128 characters. Valid values
* are alphanumeric characters and punctuation
* <code>(!"#$%&'()*+,-./:;<=>?@[\]^_`{|}~)</code>.
* </p>
* <p>
* For best practices of using <code>MessageGroupId</code>, see <a href=
* "http://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/FIFO-queue-recommendations.html#using-messagegroupid-property"
* >Using the MessageGroupId Property</a> in the <i>Amazon Simple Queue
* Service Developer Guide</i>.
* </p>
*/
private String messageGroupId;
/**
* Default constructor for SendMessageRequest object. Callers should use the
* setter or fluent setter (with...) methods to initialize any additional
* object members.
*/
public SendMessageRequest() {
}
/**
* Constructs a new SendMessageRequest object. Callers should use the setter
* or fluent setter (with...) methods to initialize any additional object
* members.
*
* @param queueUrl <p>
* The URL of the Amazon SQS queue to take action on.
* </p>
* <p>
* Queue URLs are case-sensitive.
* </p>
* @param messageBody <p>
* The message to send. String maximum 256 KB in size. For a list
* of allowed characters, see the preceding note.
* </p>
*/
public SendMessageRequest(String queueUrl, String messageBody) {
setQueueUrl(queueUrl);
setMessageBody(messageBody);
}
/**
* <p>
* The URL of the Amazon SQS queue to take action on.
* </p>
* <p>
* Queue URLs are case-sensitive.
* </p>
*
* @return <p>
* The URL of the Amazon SQS queue to take action on.
* </p>
* <p>
* Queue URLs are case-sensitive.
* </p>
*/
public String getQueueUrl() {
return queueUrl;
}
/**
* <p>
* The URL of the Amazon SQS queue to take action on.
* </p>
* <p>
* Queue URLs are case-sensitive.
* </p>
*
* @param queueUrl <p>
* The URL of the Amazon SQS queue to take action on.
* </p>
* <p>
* Queue URLs are case-sensitive.
* </p>
*/
public void setQueueUrl(String queueUrl) {
this.queueUrl = queueUrl;
}
/**
* <p>
* The URL of the Amazon SQS queue to take action on.
* </p>
* <p>
* Queue URLs are case-sensitive.
* </p>
* <p>
* Returns a reference to this object so that method calls can be chained
* together.
*
* @param queueUrl <p>
* The URL of the Amazon SQS queue to take action on.
* </p>
* <p>
* Queue URLs are case-sensitive.
* </p>
* @return A reference to this updated object so that method calls can be
* chained together.
*/
public SendMessageRequest withQueueUrl(String queueUrl) {
this.queueUrl = queueUrl;
return this;
}
/**
* <p>
* The message to send. String maximum 256 KB in size. For a list of allowed
* characters, see the preceding note.
* </p>
*
* @return <p>
* The message to send. String maximum 256 KB in size. For a list of
* allowed characters, see the preceding note.
* </p>
*/
public String getMessageBody() {
return messageBody;
}
/**
* <p>
* The message to send. String maximum 256 KB in size. For a list of allowed
* characters, see the preceding note.
* </p>
*
* @param messageBody <p>
* The message to send. String maximum 256 KB in size. For a list
* of allowed characters, see the preceding note.
* </p>
*/
public void setMessageBody(String messageBody) {
this.messageBody = messageBody;
}
/**
* <p>
* The message to send. String maximum 256 KB in size. For a list of allowed
* characters, see the preceding note.
* </p>
* <p>
* Returns a reference to this object so that method calls can be chained
* together.
*
* @param messageBody <p>
* The message to send. String maximum 256 KB in size. For a list
* of allowed characters, see the preceding note.
* </p>
* @return A reference to this updated object so that method calls can be
* chained together.
*/
public SendMessageRequest withMessageBody(String messageBody) {
this.messageBody = messageBody;
return this;
}
/**
* <p>
* The number of seconds (0 to 900 - 15 minutes) to delay a specific
* message. Messages with a positive <code>DelaySeconds</code> value become
* available for processing after the delay time is finished. If you don't
* specify a value, the default value for the queue applies.
* </p>
* <note>
* <p>
* When you set <code>FifoQueue</code>, you can't set
* <code>DelaySeconds</code> per message. You can set this parameter only on
* a queue level.
* </p>
* </note>
*
* @return <p>
* The number of seconds (0 to 900 - 15 minutes) to delay a specific
* message. Messages with a positive <code>DelaySeconds</code> value
* become available for processing after the delay time is finished.
* If you don't specify a value, the default value for the queue
* applies.
* </p>
* <note>
* <p>
* When you set <code>FifoQueue</code>, you can't set
* <code>DelaySeconds</code> per message. You can set this parameter
* only on a queue level.
* </p>
* </note>
*/
public Integer getDelaySeconds() {
return delaySeconds;
}
/**
* <p>
* The number of seconds (0 to 900 - 15 minutes) to delay a specific
* message. Messages with a positive <code>DelaySeconds</code> value become
* available for processing after the delay time is finished. If you don't
* specify a value, the default value for the queue applies.
* </p>
* <note>
* <p>
* When you set <code>FifoQueue</code>, you can't set
* <code>DelaySeconds</code> per message. You can set this parameter only on
* a queue level.
* </p>
* </note>
*
* @param delaySeconds <p>
* The number of seconds (0 to 900 - 15 minutes) to delay a
* specific message. Messages with a positive
* <code>DelaySeconds</code> value become available for
* processing after the delay time is finished. If you don't
* specify a value, the default value for the queue applies.
* </p>
* <note>
* <p>
* When you set <code>FifoQueue</code>, you can't set
* <code>DelaySeconds</code> per message. You can set this
* parameter only on a queue level.
* </p>
* </note>
*/
public void setDelaySeconds(Integer delaySeconds) {
this.delaySeconds = delaySeconds;
}
/**
* <p>
* The number of seconds (0 to 900 - 15 minutes) to delay a specific
* message. Messages with a positive <code>DelaySeconds</code> value become
* available for processing after the delay time is finished. If you don't
* specify a value, the default value for the queue applies.
* </p>
* <note>
* <p>
* When you set <code>FifoQueue</code>, you can't set
* <code>DelaySeconds</code> per message. You can set this parameter only on
* a queue level.
* </p>
* </note>
* <p>
* Returns a reference to this object so that method calls can be chained
* together.
*
* @param delaySeconds <p>
* The number of seconds (0 to 900 - 15 minutes) to delay a
* specific message. Messages with a positive
* <code>DelaySeconds</code> value become available for
* processing after the delay time is finished. If you don't
* specify a value, the default value for the queue applies.
* </p>
* <note>
* <p>
* When you set <code>FifoQueue</code>, you can't set
* <code>DelaySeconds</code> per message. You can set this
* parameter only on a queue level.
* </p>
* </note>
* @return A reference to this updated object so that method calls can be
* chained together.
*/
public SendMessageRequest withDelaySeconds(Integer delaySeconds) {
this.delaySeconds = delaySeconds;
return this;
}
/**
* <p>
* Each message attribute consists of a Name, Type, and Value. For more
* information, see <a href=
* "http://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/SQSMessageAttributes.html#SQSMessageAttributesNTV"
* >Message Attribute Items</a> in the <i>Amazon SQS Developer Guide</i>.
* </p>
*
* @return <p>
* Each message attribute consists of a Name, Type, and Value. For
* more information, see <a href=
* "http://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/SQSMessageAttributes.html#SQSMessageAttributesNTV"
* >Message Attribute Items</a> in the <i>Amazon SQS Developer
* Guide</i>.
* </p>
*/
public java.util.Map<String, MessageAttributeValue> getMessageAttributes() {
return messageAttributes;
}
/**
* <p>
* Each message attribute consists of a Name, Type, and Value. For more
* information, see <a href=
* "http://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/SQSMessageAttributes.html#SQSMessageAttributesNTV"
* >Message Attribute Items</a> in the <i>Amazon SQS Developer Guide</i>.
* </p>
*
* @param messageAttributes <p>
* Each message attribute consists of a Name, Type, and Value.
* For more information, see <a href=
* "http://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/SQSMessageAttributes.html#SQSMessageAttributesNTV"
* >Message Attribute Items</a> in the <i>Amazon SQS Developer
* Guide</i>.
* </p>
*/
public void setMessageAttributes(java.util.Map<String, MessageAttributeValue> messageAttributes) {
this.messageAttributes = messageAttributes;
}
/**
* <p>
* Each message attribute consists of a Name, Type, and Value. For more
* information, see <a href=
* "http://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/SQSMessageAttributes.html#SQSMessageAttributesNTV"
* >Message Attribute Items</a> in the <i>Amazon SQS Developer Guide</i>.
* </p>
* <p>
* Returns a reference to this object so that method calls can be chained
* together.
*
* @param messageAttributes <p>
* Each message attribute consists of a Name, Type, and Value.
* For more information, see <a href=
* "http://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/SQSMessageAttributes.html#SQSMessageAttributesNTV"
* >Message Attribute Items</a> in the <i>Amazon SQS Developer
* Guide</i>.
* </p>
* @return A reference to this updated object so that method calls can be
* chained together.
*/
public SendMessageRequest withMessageAttributes(
java.util.Map<String, MessageAttributeValue> messageAttributes) {
this.messageAttributes = messageAttributes;
return this;
}
/**
* <p>
* Each message attribute consists of a Name, Type, and Value. For more
* information, see <a href=
* "http://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/SQSMessageAttributes.html#SQSMessageAttributesNTV"
* >Message Attribute Items</a> in the <i>Amazon SQS Developer Guide</i>.
* </p>
* <p>
* The method adds a new key-value pair into MessageAttributes parameter,
* and returns a reference to this object so that method calls can be
* chained together.
*
* @param key The key of the entry to be added into MessageAttributes.
* @param value The corresponding value of the entry to be added into
* MessageAttributes.
* @return A reference to this updated object so that method calls can be
* chained together.
*/
public SendMessageRequest addMessageAttributesEntry(String key, MessageAttributeValue value) {
if (null == this.messageAttributes) {
this.messageAttributes = new java.util.HashMap<String, MessageAttributeValue>();
}
if (this.messageAttributes.containsKey(key))
throw new IllegalArgumentException("Duplicated keys (" + key.toString()
+ ") are provided.");
this.messageAttributes.put(key, value);
return this;
}
/**
* Removes all the entries added into MessageAttributes.
* <p>
* Returns a reference to this object so that method calls can be chained
* together.
*/
public SendMessageRequest clearMessageAttributesEntries() {
this.messageAttributes = null;
return this;
}
/**
* <p>
* This parameter applies only to FIFO (first-in-first-out) queues.
* </p>
* <p>
* The token used for deduplication of sent messages. If a message with a
* particular <code>MessageDeduplicationId</code> is sent successfully, any
* messages sent with the same <code>MessageDeduplicationId</code> are
* accepted successfully but aren't delivered during the 5-minute
* deduplication interval. For more information, see <a href=
* "http://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/FIFO-queues.html#FIFO-queues-exactly-once-processing"
* > Exactly-Once Processing</a> in the <i>Amazon SQS Developer Guide</i>.
* </p>
* <ul>
* <li>
* <p>
* Every message must have a unique <code>MessageDeduplicationId</code>,
* </p>
* <ul>
* <li>
* <p>
* You may provide a <code>MessageDeduplicationId</code> explicitly.
* </p>
* </li>
* <li>
* <p>
* If you aren't able to provide a <code>MessageDeduplicationId</code> and
* you enable <code>ContentBasedDeduplication</code> for your queue, Amazon
* SQS uses a SHA-256 hash to generate the
* <code>MessageDeduplicationId</code> using the body of the message (but
* not the attributes of the message).
* </p>
* </li>
* <li>
* <p>
* If you don't provide a <code>MessageDeduplicationId</code> and the queue
* doesn't have <code>ContentBasedDeduplication</code> set, the action fails
* with an error.
* </p>
* </li>
* <li>
* <p>
* If the queue has <code>ContentBasedDeduplication</code> set, your
* <code>MessageDeduplicationId</code> overrides the generated one.
* </p>
* </li>
* </ul>
* </li>
* <li>
* <p>
* When <code>ContentBasedDeduplication</code> is in effect, messages with
* identical content sent within the deduplication interval are treated as
* duplicates and only one copy of the message is delivered.
* </p>
* </li>
* <li>
* <p>
* You can also use <code>ContentBasedDeduplication</code> for messages with
* identical content to be treated as duplicates.
* </p>
* </li>
* <li>
* <p>
* If you send one message with <code>ContentBasedDeduplication</code>
* enabled and then another message with a
* <code>MessageDeduplicationId</code> that is the same as the one generated
* for the first <code>MessageDeduplicationId</code>, the two messages are
* treated as duplicates and only one copy of the message is delivered.
* </p>
* </li>
* </ul>
* <note>
* <p>
* The <code>MessageDeduplicationId</code> is available to the recipient of
* the message (this can be useful for troubleshooting delivery issues).
* </p>
* <p>
* If a message is sent successfully but the acknowledgdment is lost and the
* message is resent with the same <code>MessageDeduplicationId</code> after
* the deduplication interval, Amazon SQS can't detect duplicate messages.
* </p>
* </note>
* <p>
* The length of <code>MessageDeduplicationId</code> is 128 characters.
* <code>MessageDeduplicationId</code> can contain alphanumeric characters (
* <code>a-z</code>, <code>A-Z</code>, <code>0-9</code>) and punctuation (
* <code>!"#$%&'()*+,-./:;<=>?@[\]^_`{|}~</code>).
* </p>
* <p>
* For best practices of using <code>MessageDeduplicationId</code>, see <a
* href=
* "http://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/FIFO-queue-recommendations.html#using-messagededuplicationid-property"
* >Using the MessageDeduplicationId Property</a> in the <i>Amazon Simple
* Queue Service Developer Guide</i>.
* </p>
*
* @return <p>
* This parameter applies only to FIFO (first-in-first-out) queues.
* </p>
* <p>
* The token used for deduplication of sent messages. If a message
* with a particular <code>MessageDeduplicationId</code> is sent
* successfully, any messages sent with the same
* <code>MessageDeduplicationId</code> are accepted successfully but
* aren't delivered during the 5-minute deduplication interval. For
* more information, see <a href=
* "http://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/FIFO-queues.html#FIFO-queues-exactly-once-processing"
* > Exactly-Once Processing</a> in the <i>Amazon SQS Developer
* Guide</i>.
* </p>
* <ul>
* <li>
* <p>
* Every message must have a unique
* <code>MessageDeduplicationId</code>,
* </p>
* <ul>
* <li>
* <p>
* You may provide a <code>MessageDeduplicationId</code> explicitly.
* </p>
* </li>
* <li>
* <p>
* If you aren't able to provide a
* <code>MessageDeduplicationId</code> and you enable
* <code>ContentBasedDeduplication</code> for your queue, Amazon SQS
* uses a SHA-256 hash to generate the
* <code>MessageDeduplicationId</code> using the body of the message
* (but not the attributes of the message).
* </p>
* </li>
* <li>
* <p>
* If you don't provide a <code>MessageDeduplicationId</code> and
* the queue doesn't have <code>ContentBasedDeduplication</code>
* set, the action fails with an error.
* </p>
* </li>
* <li>
* <p>
* If the queue has <code>ContentBasedDeduplication</code> set, your
* <code>MessageDeduplicationId</code> overrides the generated one.
* </p>
* </li>
* </ul>
* </li>
* <li>
* <p>
* When <code>ContentBasedDeduplication</code> is in effect,
* messages with identical content sent within the deduplication
* interval are treated as duplicates and only one copy of the
* message is delivered.
* </p>
* </li>
* <li>
* <p>
* You can also use <code>ContentBasedDeduplication</code> for
* messages with identical content to be treated as duplicates.
* </p>
* </li>
* <li>
* <p>
* If you send one message with
* <code>ContentBasedDeduplication</code> enabled and then another
* message with a <code>MessageDeduplicationId</code> that is the
* same as the one generated for the first
* <code>MessageDeduplicationId</code>, the two messages are treated
* as duplicates and only one copy of the message is delivered.
* </p>
* </li>
* </ul>
* <note>
* <p>
* The <code>MessageDeduplicationId</code> is available to the
* recipient of the message (this can be useful for troubleshooting
* delivery issues).
* </p>
* <p>
* If a message is sent successfully but the acknowledgdment is lost
* and the message is resent with the same
* <code>MessageDeduplicationId</code> after the deduplication
* interval, Amazon SQS can't detect duplicate messages.
* </p>
* </note>
* <p>
* The length of <code>MessageDeduplicationId</code> is 128
* characters. <code>MessageDeduplicationId</code> can contain
* alphanumeric characters (<code>a-z</code>, <code>A-Z</code>,
* <code>0-9</code>) and punctuation (
* <code>!"#$%&'()*+,-./:;<=>?@[\]^_`{|}~</code>).
* </p>
* <p>
* For best practices of using <code>MessageDeduplicationId</code>,
* see <a href=
* "http://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/FIFO-queue-recommendations.html#using-messagededuplicationid-property"
* >Using the MessageDeduplicationId Property</a> in the <i>Amazon
* Simple Queue Service Developer Guide</i>.
* </p>
*/
public String getMessageDeduplicationId() {
return messageDeduplicationId;
}
/**
* <p>
* This parameter applies only to FIFO (first-in-first-out) queues.
* </p>
* <p>
* The token used for deduplication of sent messages. If a message with a
* particular <code>MessageDeduplicationId</code> is sent successfully, any
* messages sent with the same <code>MessageDeduplicationId</code> are
* accepted successfully but aren't delivered during the 5-minute
* deduplication interval. For more information, see <a href=
* "http://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/FIFO-queues.html#FIFO-queues-exactly-once-processing"
* > Exactly-Once Processing</a> in the <i>Amazon SQS Developer Guide</i>.
* </p>
* <ul>
* <li>
* <p>
* Every message must have a unique <code>MessageDeduplicationId</code>,
* </p>
* <ul>
* <li>
* <p>
* You may provide a <code>MessageDeduplicationId</code> explicitly.
* </p>
* </li>
* <li>
* <p>
* If you aren't able to provide a <code>MessageDeduplicationId</code> and
* you enable <code>ContentBasedDeduplication</code> for your queue, Amazon
* SQS uses a SHA-256 hash to generate the
* <code>MessageDeduplicationId</code> using the body of the message (but
* not the attributes of the message).
* </p>
* </li>
* <li>
* <p>
* If you don't provide a <code>MessageDeduplicationId</code> and the queue
* doesn't have <code>ContentBasedDeduplication</code> set, the action fails
* with an error.
* </p>
* </li>
* <li>
* <p>
* If the queue has <code>ContentBasedDeduplication</code> set, your
* <code>MessageDeduplicationId</code> overrides the generated one.
* </p>
* </li>
* </ul>
* </li>
* <li>
* <p>
* When <code>ContentBasedDeduplication</code> is in effect, messages with
* identical content sent within the deduplication interval are treated as
* duplicates and only one copy of the message is delivered.
* </p>
* </li>
* <li>
* <p>
* You can also use <code>ContentBasedDeduplication</code> for messages with
* identical content to be treated as duplicates.
* </p>
* </li>
* <li>
* <p>
* If you send one message with <code>ContentBasedDeduplication</code>
* enabled and then another message with a
* <code>MessageDeduplicationId</code> that is the same as the one generated
* for the first <code>MessageDeduplicationId</code>, the two messages are
* treated as duplicates and only one copy of the message is delivered.
* </p>
* </li>
* </ul>
* <note>
* <p>
* The <code>MessageDeduplicationId</code> is available to the recipient of
* the message (this can be useful for troubleshooting delivery issues).
* </p>
* <p>
* If a message is sent successfully but the acknowledgdment is lost and the
* message is resent with the same <code>MessageDeduplicationId</code> after
* the deduplication interval, Amazon SQS can't detect duplicate messages.
* </p>
* </note>
* <p>
* The length of <code>MessageDeduplicationId</code> is 128 characters.
* <code>MessageDeduplicationId</code> can contain alphanumeric characters (
* <code>a-z</code>, <code>A-Z</code>, <code>0-9</code>) and punctuation (
* <code>!"#$%&'()*+,-./:;<=>?@[\]^_`{|}~</code>).
* </p>
* <p>
* For best practices of using <code>MessageDeduplicationId</code>, see <a
* href=
* "http://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/FIFO-queue-recommendations.html#using-messagededuplicationid-property"
* >Using the MessageDeduplicationId Property</a> in the <i>Amazon Simple
* Queue Service Developer Guide</i>.
* </p>
*
* @param messageDeduplicationId <p>
* This parameter applies only to FIFO (first-in-first-out)
* queues.
* </p>
* <p>
* The token used for deduplication of sent messages. If a
* message with a particular <code>MessageDeduplicationId</code>
* is sent successfully, any messages sent with the same
* <code>MessageDeduplicationId</code> are accepted successfully
* but aren't delivered during the 5-minute deduplication
* interval. For more information, see <a href=
* "http://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/FIFO-queues.html#FIFO-queues-exactly-once-processing"
* > Exactly-Once Processing</a> in the <i>Amazon SQS Developer
* Guide</i>.
* </p>
* <ul>
* <li>
* <p>
* Every message must have a unique
* <code>MessageDeduplicationId</code>,
* </p>
* <ul>
* <li>
* <p>
* You may provide a <code>MessageDeduplicationId</code>
* explicitly.
* </p>
* </li>
* <li>
* <p>
* If you aren't able to provide a
* <code>MessageDeduplicationId</code> and you enable
* <code>ContentBasedDeduplication</code> for your queue, Amazon
* SQS uses a SHA-256 hash to generate the
* <code>MessageDeduplicationId</code> using the body of the
* message (but not the attributes of the message).
* </p>
* </li>
* <li>
* <p>
* If you don't provide a <code>MessageDeduplicationId</code> and
* the queue doesn't have <code>ContentBasedDeduplication</code>
* set, the action fails with an error.
* </p>
* </li>
* <li>
* <p>
* If the queue has <code>ContentBasedDeduplication</code> set,
* your <code>MessageDeduplicationId</code> overrides the
* generated one.
* </p>
* </li>
* </ul>
* </li>
* <li>
* <p>
* When <code>ContentBasedDeduplication</code> is in effect,
* messages with identical content sent within the deduplication
* interval are treated as duplicates and only one copy of the
* message is delivered.
* </p>
* </li>
* <li>
* <p>
* You can also use <code>ContentBasedDeduplication</code> for
* messages with identical content to be treated as duplicates.
* </p>
* </li>
* <li>
* <p>
* If you send one message with
* <code>ContentBasedDeduplication</code> enabled and then
* another message with a <code>MessageDeduplicationId</code>
* that is the same as the one generated for the first
* <code>MessageDeduplicationId</code>, the two messages are
* treated as duplicates and only one copy of the message is
* delivered.
* </p>
* </li>
* </ul>
* <note>
* <p>
* The <code>MessageDeduplicationId</code> is available to the
* recipient of the message (this can be useful for
* troubleshooting delivery issues).
* </p>
* <p>
* If a message is sent successfully but the acknowledgdment is
* lost and the message is resent with the same
* <code>MessageDeduplicationId</code> after the deduplication
* interval, Amazon SQS can't detect duplicate messages.
* </p>
* </note>
* <p>
* The length of <code>MessageDeduplicationId</code> is 128
* characters. <code>MessageDeduplicationId</code> can contain
* alphanumeric characters (<code>a-z</code>, <code>A-Z</code>,
* <code>0-9</code>) and punctuation (
* <code>!"#$%&'()*+,-./:;<=>?@[\]^_`{|}~</code>).
* </p>
* <p>
* For best practices of using
* <code>MessageDeduplicationId</code>, see <a href=
* "http://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/FIFO-queue-recommendations.html#using-messagededuplicationid-property"
* >Using the MessageDeduplicationId Property</a> in the
* <i>Amazon Simple Queue Service Developer Guide</i>.
* </p>
*/
public void setMessageDeduplicationId(String messageDeduplicationId) {
this.messageDeduplicationId = messageDeduplicationId;
}
/**
* <p>
* This parameter applies only to FIFO (first-in-first-out) queues.
* </p>
* <p>
* The token used for deduplication of sent messages. If a message with a
* particular <code>MessageDeduplicationId</code> is sent successfully, any
* messages sent with the same <code>MessageDeduplicationId</code> are
* accepted successfully but aren't delivered during the 5-minute
* deduplication interval. For more information, see <a href=
* "http://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/FIFO-queues.html#FIFO-queues-exactly-once-processing"
* > Exactly-Once Processing</a> in the <i>Amazon SQS Developer Guide</i>.
* </p>
* <ul>
* <li>
* <p>
* Every message must have a unique <code>MessageDeduplicationId</code>,
* </p>
* <ul>
* <li>
* <p>
* You may provide a <code>MessageDeduplicationId</code> explicitly.
* </p>
* </li>
* <li>
* <p>
* If you aren't able to provide a <code>MessageDeduplicationId</code> and
* you enable <code>ContentBasedDeduplication</code> for your queue, Amazon
* SQS uses a SHA-256 hash to generate the
* <code>MessageDeduplicationId</code> using the body of the message (but
* not the attributes of the message).
* </p>
* </li>
* <li>
* <p>
* If you don't provide a <code>MessageDeduplicationId</code> and the queue
* doesn't have <code>ContentBasedDeduplication</code> set, the action fails
* with an error.
* </p>
* </li>
* <li>
* <p>
* If the queue has <code>ContentBasedDeduplication</code> set, your
* <code>MessageDeduplicationId</code> overrides the generated one.
* </p>
* </li>
* </ul>
* </li>
* <li>
* <p>
* When <code>ContentBasedDeduplication</code> is in effect, messages with
* identical content sent within the deduplication interval are treated as
* duplicates and only one copy of the message is delivered.
* </p>
* </li>
* <li>
* <p>
* You can also use <code>ContentBasedDeduplication</code> for messages with
* identical content to be treated as duplicates.
* </p>
* </li>
* <li>
* <p>
* If you send one message with <code>ContentBasedDeduplication</code>
* enabled and then another message with a
* <code>MessageDeduplicationId</code> that is the same as the one generated
* for the first <code>MessageDeduplicationId</code>, the two messages are
* treated as duplicates and only one copy of the message is delivered.
* </p>
* </li>
* </ul>
* <note>
* <p>
* The <code>MessageDeduplicationId</code> is available to the recipient of
* the message (this can be useful for troubleshooting delivery issues).
* </p>
* <p>
* If a message is sent successfully but the acknowledgdment is lost and the
* message is resent with the same <code>MessageDeduplicationId</code> after
* the deduplication interval, Amazon SQS can't detect duplicate messages.
* </p>
* </note>
* <p>
* The length of <code>MessageDeduplicationId</code> is 128 characters.
* <code>MessageDeduplicationId</code> can contain alphanumeric characters (
* <code>a-z</code>, <code>A-Z</code>, <code>0-9</code>) and punctuation (
* <code>!"#$%&'()*+,-./:;<=>?@[\]^_`{|}~</code>).
* </p>
* <p>
* For best practices of using <code>MessageDeduplicationId</code>, see <a
* href=
* "http://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/FIFO-queue-recommendations.html#using-messagededuplicationid-property"
* >Using the MessageDeduplicationId Property</a> in the <i>Amazon Simple
* Queue Service Developer Guide</i>.
* </p>
* <p>
* Returns a reference to this object so that method calls can be chained
* together.
*
* @param messageDeduplicationId <p>
* This parameter applies only to FIFO (first-in-first-out)
* queues.
* </p>
* <p>
* The token used for deduplication of sent messages. If a
* message with a particular <code>MessageDeduplicationId</code>
* is sent successfully, any messages sent with the same
* <code>MessageDeduplicationId</code> are accepted successfully
* but aren't delivered during the 5-minute deduplication
* interval. For more information, see <a href=
* "http://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/FIFO-queues.html#FIFO-queues-exactly-once-processing"
* > Exactly-Once Processing</a> in the <i>Amazon SQS Developer
* Guide</i>.
* </p>
* <ul>
* <li>
* <p>
* Every message must have a unique
* <code>MessageDeduplicationId</code>,
* </p>
* <ul>
* <li>
* <p>
* You may provide a <code>MessageDeduplicationId</code>
* explicitly.
* </p>
* </li>
* <li>
* <p>
* If you aren't able to provide a
* <code>MessageDeduplicationId</code> and you enable
* <code>ContentBasedDeduplication</code> for your queue, Amazon
* SQS uses a SHA-256 hash to generate the
* <code>MessageDeduplicationId</code> using the body of the
* message (but not the attributes of the message).
* </p>
* </li>
* <li>
* <p>
* If you don't provide a <code>MessageDeduplicationId</code> and
* the queue doesn't have <code>ContentBasedDeduplication</code>
* set, the action fails with an error.
* </p>
* </li>
* <li>
* <p>
* If the queue has <code>ContentBasedDeduplication</code> set,
* your <code>MessageDeduplicationId</code> overrides the
* generated one.
* </p>
* </li>
* </ul>
* </li>
* <li>
* <p>
* When <code>ContentBasedDeduplication</code> is in effect,
* messages with identical content sent within the deduplication
* interval are treated as duplicates and only one copy of the
* message is delivered.
* </p>
* </li>
* <li>
* <p>
* You can also use <code>ContentBasedDeduplication</code> for
* messages with identical content to be treated as duplicates.
* </p>
* </li>
* <li>
* <p>
* If you send one message with
* <code>ContentBasedDeduplication</code> enabled and then
* another message with a <code>MessageDeduplicationId</code>
* that is the same as the one generated for the first
* <code>MessageDeduplicationId</code>, the two messages are
* treated as duplicates and only one copy of the message is
* delivered.
* </p>
* </li>
* </ul>
* <note>
* <p>
* The <code>MessageDeduplicationId</code> is available to the
* recipient of the message (this can be useful for
* troubleshooting delivery issues).
* </p>
* <p>
* If a message is sent successfully but the acknowledgdment is
* lost and the message is resent with the same
* <code>MessageDeduplicationId</code> after the deduplication
* interval, Amazon SQS can't detect duplicate messages.
* </p>
* </note>
* <p>
* The length of <code>MessageDeduplicationId</code> is 128
* characters. <code>MessageDeduplicationId</code> can contain
* alphanumeric characters (<code>a-z</code>, <code>A-Z</code>,
* <code>0-9</code>) and punctuation (
* <code>!"#$%&'()*+,-./:;<=>?@[\]^_`{|}~</code>).
* </p>
* <p>
* For best practices of using
* <code>MessageDeduplicationId</code>, see <a href=
* "http://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/FIFO-queue-recommendations.html#using-messagededuplicationid-property"
* >Using the MessageDeduplicationId Property</a> in the
* <i>Amazon Simple Queue Service Developer Guide</i>.
* </p>
* @return A reference to this updated object so that method calls can be
* chained together.
*/
public SendMessageRequest withMessageDeduplicationId(String messageDeduplicationId) {
this.messageDeduplicationId = messageDeduplicationId;
return this;
}
/**
* <p>
* This parameter applies only to FIFO (first-in-first-out) queues.
* </p>
* <p>
* The tag that specifies that a message belongs to a specific message
* group. Messages that belong to the same message group are processed in a
* FIFO manner (however, messages in different message groups might be
* processed out of order). To interleave multiple ordered streams within a
* single queue, use <code>MessageGroupId</code> values (for example,
* session data for multiple users). In this scenario, multiple readers can
* process the queue, but the session data of each user is processed in a
* FIFO fashion.
* </p>
* <ul>
* <li>
* <p>
* You must associate a non-empty <code>MessageGroupId</code> with a
* message. If you don't provide a <code>MessageGroupId</code>, the action
* fails.
* </p>
* </li>
* <li>
* <p>
* <code>ReceiveMessage</code> might return messages with multiple
* <code>MessageGroupId</code> values. For each <code>MessageGroupId</code>,
* the messages are sorted by time sent. The caller can't specify a
* <code>MessageGroupId</code>.
* </p>
* </li>
* </ul>
* <p>
* The length of <code>MessageGroupId</code> is 128 characters. Valid values
* are alphanumeric characters and punctuation
* <code>(!"#$%&'()*+,-./:;<=>?@[\]^_`{|}~)</code>.
* </p>
* <p>
* For best practices of using <code>MessageGroupId</code>, see <a href=
* "http://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/FIFO-queue-recommendations.html#using-messagegroupid-property"
* >Using the MessageGroupId Property</a> in the <i>Amazon Simple Queue
* Service Developer Guide</i>.
* </p>
*
* @return <p>
* This parameter applies only to FIFO (first-in-first-out) queues.
* </p>
* <p>
* The tag that specifies that a message belongs to a specific
* message group. Messages that belong to the same message group are
* processed in a FIFO manner (however, messages in different
* message groups might be processed out of order). To interleave
* multiple ordered streams within a single queue, use
* <code>MessageGroupId</code> values (for example, session data for
* multiple users). In this scenario, multiple readers can process
* the queue, but the session data of each user is processed in a
* FIFO fashion.
* </p>
* <ul>
* <li>
* <p>
* You must associate a non-empty <code>MessageGroupId</code> with a
* message. If you don't provide a <code>MessageGroupId</code>, the
* action fails.
* </p>
* </li>
* <li>
* <p>
* <code>ReceiveMessage</code> might return messages with multiple
* <code>MessageGroupId</code> values. For each
* <code>MessageGroupId</code>, the messages are sorted by time
* sent. The caller can't specify a <code>MessageGroupId</code>.
* </p>
* </li>
* </ul>
* <p>
* The length of <code>MessageGroupId</code> is 128 characters.
* Valid values are alphanumeric characters and punctuation
* <code>(!"#$%&'()*+,-./:;<=>?@[\]^_`{|}~)</code>.
* </p>
* <p>
* For best practices of using <code>MessageGroupId</code>, see <a
* href=
* "http://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/FIFO-queue-recommendations.html#using-messagegroupid-property"
* >Using the MessageGroupId Property</a> in the <i>Amazon Simple
* Queue Service Developer Guide</i>.
* </p>
*/
public String getMessageGroupId() {
return messageGroupId;
}
/**
* <p>
* This parameter applies only to FIFO (first-in-first-out) queues.
* </p>
* <p>
* The tag that specifies that a message belongs to a specific message
* group. Messages that belong to the same message group are processed in a
* FIFO manner (however, messages in different message groups might be
* processed out of order). To interleave multiple ordered streams within a
* single queue, use <code>MessageGroupId</code> values (for example,
* session data for multiple users). In this scenario, multiple readers can
* process the queue, but the session data of each user is processed in a
* FIFO fashion.
* </p>
* <ul>
* <li>
* <p>
* You must associate a non-empty <code>MessageGroupId</code> with a
* message. If you don't provide a <code>MessageGroupId</code>, the action
* fails.
* </p>
* </li>
* <li>
* <p>
* <code>ReceiveMessage</code> might return messages with multiple
* <code>MessageGroupId</code> values. For each <code>MessageGroupId</code>,
* the messages are sorted by time sent. The caller can't specify a
* <code>MessageGroupId</code>.
* </p>
* </li>
* </ul>
* <p>
* The length of <code>MessageGroupId</code> is 128 characters. Valid values
* are alphanumeric characters and punctuation
* <code>(!"#$%&'()*+,-./:;<=>?@[\]^_`{|}~)</code>.
* </p>
* <p>
* For best practices of using <code>MessageGroupId</code>, see <a href=
* "http://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/FIFO-queue-recommendations.html#using-messagegroupid-property"
* >Using the MessageGroupId Property</a> in the <i>Amazon Simple Queue
* Service Developer Guide</i>.
* </p>
*
* @param messageGroupId <p>
* This parameter applies only to FIFO (first-in-first-out)
* queues.
* </p>
* <p>
* The tag that specifies that a message belongs to a specific
* message group. Messages that belong to the same message group
* are processed in a FIFO manner (however, messages in different
* message groups might be processed out of order). To interleave
* multiple ordered streams within a single queue, use
* <code>MessageGroupId</code> values (for example, session data
* for multiple users). In this scenario, multiple readers can
* process the queue, but the session data of each user is
* processed in a FIFO fashion.
* </p>
* <ul>
* <li>
* <p>
* You must associate a non-empty <code>MessageGroupId</code>
* with a message. If you don't provide a
* <code>MessageGroupId</code>, the action fails.
* </p>
* </li>
* <li>
* <p>
* <code>ReceiveMessage</code> might return messages with
* multiple <code>MessageGroupId</code> values. For each
* <code>MessageGroupId</code>, the messages are sorted by time
* sent. The caller can't specify a <code>MessageGroupId</code>.
* </p>
* </li>
* </ul>
* <p>
* The length of <code>MessageGroupId</code> is 128 characters.
* Valid values are alphanumeric characters and punctuation
* <code>(!"#$%&'()*+,-./:;<=>?@[\]^_`{|}~)</code>.
* </p>
* <p>
* For best practices of using <code>MessageGroupId</code>, see
* <a href=
* "http://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/FIFO-queue-recommendations.html#using-messagegroupid-property"
* >Using the MessageGroupId Property</a> in the <i>Amazon Simple
* Queue Service Developer Guide</i>.
* </p>
*/
public void setMessageGroupId(String messageGroupId) {
this.messageGroupId = messageGroupId;
}
/**
* <p>
* This parameter applies only to FIFO (first-in-first-out) queues.
* </p>
* <p>
* The tag that specifies that a message belongs to a specific message
* group. Messages that belong to the same message group are processed in a
* FIFO manner (however, messages in different message groups might be
* processed out of order). To interleave multiple ordered streams within a
* single queue, use <code>MessageGroupId</code> values (for example,
* session data for multiple users). In this scenario, multiple readers can
* process the queue, but the session data of each user is processed in a
* FIFO fashion.
* </p>
* <ul>
* <li>
* <p>
* You must associate a non-empty <code>MessageGroupId</code> with a
* message. If you don't provide a <code>MessageGroupId</code>, the action
* fails.
* </p>
* </li>
* <li>
* <p>
* <code>ReceiveMessage</code> might return messages with multiple
* <code>MessageGroupId</code> values. For each <code>MessageGroupId</code>,
* the messages are sorted by time sent. The caller can't specify a
* <code>MessageGroupId</code>.
* </p>
* </li>
* </ul>
* <p>
* The length of <code>MessageGroupId</code> is 128 characters. Valid values
* are alphanumeric characters and punctuation
* <code>(!"#$%&'()*+,-./:;<=>?@[\]^_`{|}~)</code>.
* </p>
* <p>
* For best practices of using <code>MessageGroupId</code>, see <a href=
* "http://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/FIFO-queue-recommendations.html#using-messagegroupid-property"
* >Using the MessageGroupId Property</a> in the <i>Amazon Simple Queue
* Service Developer Guide</i>.
* </p>
* <p>
* Returns a reference to this object so that method calls can be chained
* together.
*
* @param messageGroupId <p>
* This parameter applies only to FIFO (first-in-first-out)
* queues.
* </p>
* <p>
* The tag that specifies that a message belongs to a specific
* message group. Messages that belong to the same message group
* are processed in a FIFO manner (however, messages in different
* message groups might be processed out of order). To interleave
* multiple ordered streams within a single queue, use
* <code>MessageGroupId</code> values (for example, session data
* for multiple users). In this scenario, multiple readers can
* process the queue, but the session data of each user is
* processed in a FIFO fashion.
* </p>
* <ul>
* <li>
* <p>
* You must associate a non-empty <code>MessageGroupId</code>
* with a message. If you don't provide a
* <code>MessageGroupId</code>, the action fails.
* </p>
* </li>
* <li>
* <p>
* <code>ReceiveMessage</code> might return messages with
* multiple <code>MessageGroupId</code> values. For each
* <code>MessageGroupId</code>, the messages are sorted by time
* sent. The caller can't specify a <code>MessageGroupId</code>.
* </p>
* </li>
* </ul>
* <p>
* The length of <code>MessageGroupId</code> is 128 characters.
* Valid values are alphanumeric characters and punctuation
* <code>(!"#$%&'()*+,-./:;<=>?@[\]^_`{|}~)</code>.
* </p>
* <p>
* For best practices of using <code>MessageGroupId</code>, see
* <a href=
* "http://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/FIFO-queue-recommendations.html#using-messagegroupid-property"
* >Using the MessageGroupId Property</a> in the <i>Amazon Simple
* Queue Service Developer Guide</i>.
* </p>
* @return A reference to this updated object so that method calls can be
* chained together.
*/
public SendMessageRequest withMessageGroupId(String messageGroupId) {
this.messageGroupId = messageGroupId;
return this;
}
/**
* Returns a string representation of this object; useful for testing and
* debugging.
*
* @return A string representation of this object.
* @see java.lang.Object#toString()
*/
@Override
public String toString() {
StringBuilder sb = new StringBuilder();
sb.append("{");
if (getQueueUrl() != null)
sb.append("QueueUrl: " + getQueueUrl() + ",");
if (getMessageBody() != null)
sb.append("MessageBody: " + getMessageBody() + ",");
if (getDelaySeconds() != null)
sb.append("DelaySeconds: " + getDelaySeconds() + ",");
if (getMessageAttributes() != null)
sb.append("MessageAttributes: " + getMessageAttributes() + ",");
if (getMessageDeduplicationId() != null)
sb.append("MessageDeduplicationId: " + getMessageDeduplicationId() + ",");
if (getMessageGroupId() != null)
sb.append("MessageGroupId: " + getMessageGroupId());
sb.append("}");
return sb.toString();
}
@Override
public int hashCode() {
final int prime = 31;
int hashCode = 1;
hashCode = prime * hashCode + ((getQueueUrl() == null) ? 0 : getQueueUrl().hashCode());
hashCode = prime * hashCode
+ ((getMessageBody() == null) ? 0 : getMessageBody().hashCode());
hashCode = prime * hashCode
+ ((getDelaySeconds() == null) ? 0 : getDelaySeconds().hashCode());
hashCode = prime * hashCode
+ ((getMessageAttributes() == null) ? 0 : getMessageAttributes().hashCode());
hashCode = prime
* hashCode
+ ((getMessageDeduplicationId() == null) ? 0 : getMessageDeduplicationId()
.hashCode());
hashCode = prime * hashCode
+ ((getMessageGroupId() == null) ? 0 : getMessageGroupId().hashCode());
return hashCode;
}
@Override
public boolean equals(Object obj) {
if (this == obj)
return true;
if (obj == null)
return false;
if (obj instanceof SendMessageRequest == false)
return false;
SendMessageRequest other = (SendMessageRequest) obj;
if (other.getQueueUrl() == null ^ this.getQueueUrl() == null)
return false;
if (other.getQueueUrl() != null && other.getQueueUrl().equals(this.getQueueUrl()) == false)
return false;
if (other.getMessageBody() == null ^ this.getMessageBody() == null)
return false;
if (other.getMessageBody() != null
&& other.getMessageBody().equals(this.getMessageBody()) == false)
return false;
if (other.getDelaySeconds() == null ^ this.getDelaySeconds() == null)
return false;
if (other.getDelaySeconds() != null
&& other.getDelaySeconds().equals(this.getDelaySeconds()) == false)
return false;
if (other.getMessageAttributes() == null ^ this.getMessageAttributes() == null)
return false;
if (other.getMessageAttributes() != null
&& other.getMessageAttributes().equals(this.getMessageAttributes()) == false)
return false;
if (other.getMessageDeduplicationId() == null ^ this.getMessageDeduplicationId() == null)
return false;
if (other.getMessageDeduplicationId() != null
&& other.getMessageDeduplicationId().equals(this.getMessageDeduplicationId()) == false)
return false;
if (other.getMessageGroupId() == null ^ this.getMessageGroupId() == null)
return false;
if (other.getMessageGroupId() != null
&& other.getMessageGroupId().equals(this.getMessageGroupId()) == false)
return false;
return true;
}
}