/*
* Copyright 2010-2016 Amazon.com, Inc. or its affiliates. All Rights Reserved.
*
* Licensed under the Apache License, Version 2.0 (the "License").
* You may not use this file except in compliance with the License.
* A copy of the License is located at
*
* http://aws.amazon.com/apache2.0
*
* or in the "license" file accompanying this file. This file is distributed
* on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either
* express or implied. See the License for the specific language governing
* permissions and limitations under the License.
*/
package com.amazonaws.services.kinesis;
import com.amazonaws.*;
import com.amazonaws.regions.*;
import com.amazonaws.services.kinesis.model.*;
/**
* Interface for accessing Amazon Kinesis Streams <fullname>Amazon Kinesis
* Streams Service API Reference</fullname>
* <p>
* Amazon Kinesis Streams is a managed service that scales elastically for real
* time processing of streaming big data.
* </p>
**/
public interface AmazonKinesis {
/**
* Overrides the default endpoint for this client
* ("https://kinesis.us-east-1.amazonaws.com"). Callers can use this method
* to control which AWS region they want to work with.
* <p>
* Callers can pass in just the endpoint (ex:
* "kinesis.us-east-1.amazonaws.com") or a full URL, including the protocol
* (ex: "https://kinesis.us-east-1.amazonaws.com"). If the protocol is not
* specified here, the default protocol from this client's
* {@link ClientConfiguration} will be used, which by default is HTTPS.
* <p>
* For more information on using AWS regions with the AWS SDK for Java, and
* a complete list of all available endpoints for all AWS services, see: <a
* href=
* "http://developer.amazonwebservices.com/connect/entry.jspa?externalID=3912"
* > http://developer.amazonwebservices.com/connect/entry.jspa?externalID=
* 3912</a>
* <p>
* <b>This method is not threadsafe. An endpoint should be configured when
* the client is created and before any service requests are made. Changing
* it afterwards creates inevitable race conditions for any service requests
* in transit or retrying.</b>
*
* @param endpoint The endpoint (ex: "kinesis.us-east-1.amazonaws.com") or a
* full URL, including the protocol (ex:
* "https://kinesis.us-east-1.amazonaws.com") of the region
* specific AWS endpoint this client will communicate with.
* @throws IllegalArgumentException If any problems are detected with the
* specified endpoint.
*/
public void setEndpoint(String endpoint) throws java.lang.IllegalArgumentException;
/**
* An alternative to {@link AmazonKinesis#setEndpoint(String)}, sets the
* regional endpoint for this client's service calls. Callers can use this
* method to control which AWS region they want to work with.
* <p>
* By default, all service endpoints in all regions use the https protocol.
* To use http instead, specify it in the {@link ClientConfiguration}
* supplied at construction.
* <p>
* <b>This method is not threadsafe. A region should be configured when the
* client is created and before any service requests are made. Changing it
* afterwards creates inevitable race conditions for any service requests in
* transit or retrying.</b>
*
* @param region The region this client will communicate with. See
* {@link Region#getRegion(com.amazonaws.regions.Regions)} for
* accessing a given region.
* @throws java.lang.IllegalArgumentException If the given region is null,
* or if this service isn't available in the given region. See
* {@link Region#isServiceSupported(String)}
* @see Region#getRegion(com.amazonaws.regions.Regions)
* @see Region#createClient(Class,
* com.amazonaws.auth.AWSCredentialsProvider, ClientConfiguration)
*/
public void setRegion(Region region) throws java.lang.IllegalArgumentException;
/**
* <p>
* Adds or updates tags for the specified Amazon Kinesis stream. Each stream
* can have up to 10 tags.
* </p>
* <p>
* If tags have already been assigned to the stream,
* <code>AddTagsToStream</code> overwrites any existing tags that correspond
* to the specified tag keys.
* </p>
*
* @param addTagsToStreamRequest <p>
* Represents the input for <code>AddTagsToStream</code>.
* </p>
* @throws ResourceNotFoundException
* @throws ResourceInUseException
* @throws InvalidArgumentException
* @throws LimitExceededException
* @throws AmazonClientException If any internal errors are encountered
* inside the client while attempting to make the request or
* handle the response. For example if a network connection is
* not available.
* @throws AmazonServiceException If an error response is returned by Amazon
* Kinesis Streams indicating either a problem with the data in
* the request, or a server side issue.
*/
void addTagsToStream(AddTagsToStreamRequest addTagsToStreamRequest)
throws AmazonClientException, AmazonServiceException;
/**
* <p>
* Creates an Amazon Kinesis stream. A stream captures and transports data
* records that are continuously emitted from different data sources or
* <i>producers</i>. Scale-out within a stream is explicitly supported by
* means of shards, which are uniquely identified groups of data records in
* a stream.
* </p>
* <p>
* You specify and control the number of shards that a stream is composed
* of. Each shard can support reads up to 5 transactions per second, up to a
* maximum data read total of 2 MB per second. Each shard can support writes
* up to 1,000 records per second, up to a maximum data write total of 1 MB
* per second. You can add shards to a stream if the amount of data input
* increases and you can remove shards if the amount of data input
* decreases.
* </p>
* <p>
* The stream name identifies the stream. The name is scoped to the AWS
* account used by the application. It is also scoped by region. That is,
* two streams in two different accounts can have the same name, and two
* streams in the same account, but in two different regions, can have the
* same name.
* </p>
* <p>
* <code>CreateStream</code> is an asynchronous operation. Upon receiving a
* <code>CreateStream</code> request, Amazon Kinesis immediately returns and
* sets the stream status to <code>CREATING</code>. After the stream is
* created, Amazon Kinesis sets the stream status to <code>ACTIVE</code>.
* You should perform read and write operations only on an
* <code>ACTIVE</code> stream.
* </p>
* <p>
* You receive a <code>LimitExceededException</code> when making a
* <code>CreateStream</code> request if you try to do one of the following:
* </p>
* <ul>
* <li>Have more than five streams in the <code>CREATING</code> state at any
* point in time.</li>
* <li>Create more shards than are authorized for your account.</li>
* </ul>
* <p>
* For the default shard limit for an AWS account, see <a href=
* "http://docs.aws.amazon.com/kinesis/latest/dev/service-sizes-and-limits.html"
* >Streams Limits</a> in the <i>Amazon Kinesis Streams Developer Guide</i>.
* If you need to increase this limit, <a href=
* "http://docs.aws.amazon.com/general/latest/gr/aws_service_limits.html"
* >contact AWS Support</a>.
* </p>
* <p>
* You can use <code>DescribeStream</code> to check the stream status, which
* is returned in <code>StreamStatus</code>.
* </p>
* <p>
* <a>CreateStream</a> has a limit of 5 transactions per second per account.
* </p>
*
* @param createStreamRequest <p>
* Represents the input for <code>CreateStream</code>.
* </p>
* @throws ResourceInUseException
* @throws LimitExceededException
* @throws InvalidArgumentException
* @throws AmazonClientException If any internal errors are encountered
* inside the client while attempting to make the request or
* handle the response. For example if a network connection is
* not available.
* @throws AmazonServiceException If an error response is returned by Amazon
* Kinesis Streams indicating either a problem with the data in
* the request, or a server side issue.
*/
void createStream(CreateStreamRequest createStreamRequest) throws AmazonClientException,
AmazonServiceException;
/**
* <p>
* Decreases the Amazon Kinesis stream's retention period, which is the
* length of time data records are accessible after they are added to the
* stream. The minimum value of a stream's retention period is 24 hours.
* </p>
* <p>
* This operation may result in lost data. For example, if the stream's
* retention period is 48 hours and is decreased to 24 hours, any data
* already in the stream that is older than 24 hours is inaccessible.
* </p>
*
* @param decreaseStreamRetentionPeriodRequest <p>
* Represents the input for <a>DecreaseStreamRetentionPeriod</a>.
* </p>
* @throws ResourceInUseException
* @throws ResourceNotFoundException
* @throws LimitExceededException
* @throws InvalidArgumentException
* @throws AmazonClientException If any internal errors are encountered
* inside the client while attempting to make the request or
* handle the response. For example if a network connection is
* not available.
* @throws AmazonServiceException If an error response is returned by Amazon
* Kinesis Streams indicating either a problem with the data in
* the request, or a server side issue.
*/
void decreaseStreamRetentionPeriod(
DecreaseStreamRetentionPeriodRequest decreaseStreamRetentionPeriodRequest)
throws AmazonClientException, AmazonServiceException;
/**
* <p>
* Deletes an Amazon Kinesis stream and all its shards and data. You must
* shut down any applications that are operating on the stream before you
* delete the stream. If an application attempts to operate on a deleted
* stream, it will receive the exception
* <code>ResourceNotFoundException</code>.
* </p>
* <p>
* If the stream is in the <code>ACTIVE</code> state, you can delete it.
* After a <code>DeleteStream</code> request, the specified stream is in the
* <code>DELETING</code> state until Amazon Kinesis completes the deletion.
* </p>
* <p>
* <b>Note:</b> Amazon Kinesis might continue to accept data read and write
* operations, such as <a>PutRecord</a>, <a>PutRecords</a>, and
* <a>GetRecords</a>, on a stream in the <code>DELETING</code> state until
* the stream deletion is complete.
* </p>
* <p>
* When you delete a stream, any shards in that stream are also deleted, and
* any tags are dissociated from the stream.
* </p>
* <p>
* You can use the <a>DescribeStream</a> operation to check the state of the
* stream, which is returned in <code>StreamStatus</code>.
* </p>
* <p>
* <a>DeleteStream</a> has a limit of 5 transactions per second per account.
* </p>
*
* @param deleteStreamRequest <p>
* Represents the input for <a>DeleteStream</a>.
* </p>
* @throws ResourceNotFoundException
* @throws LimitExceededException
* @throws AmazonClientException If any internal errors are encountered
* inside the client while attempting to make the request or
* handle the response. For example if a network connection is
* not available.
* @throws AmazonServiceException If an error response is returned by Amazon
* Kinesis Streams indicating either a problem with the data in
* the request, or a server side issue.
*/
void deleteStream(DeleteStreamRequest deleteStreamRequest) throws AmazonClientException,
AmazonServiceException;
/**
* <p>
* Describes the specified Amazon Kinesis stream.
* </p>
* <p>
* The information about the stream includes its current status, its Amazon
* Resource Name (ARN), and an array of shard objects. For each shard
* object, there is information about the hash key and sequence number
* ranges that the shard spans, and the IDs of any earlier shards that
* played in a role in creating the shard. A sequence number is the
* identifier associated with every record ingested in the stream. The
* sequence number is assigned when a record is put into the stream.
* </p>
* <p>
* You can limit the number of returned shards using the <code>Limit</code>
* parameter. The number of shards in a stream may be too large to return
* from a single call to <code>DescribeStream</code>. You can detect this by
* using the <code>HasMoreShards</code> flag in the returned output.
* <code>HasMoreShards</code> is set to <code>true</code> when there is more
* data available.
* </p>
* <p>
* <code>DescribeStream</code> is a paginated operation. If there are more
* shards available, you can request them using the shard ID of the last
* shard returned. Specify this ID in the <code>ExclusiveStartShardId</code>
* parameter in a subsequent request to <code>DescribeStream</code>.
* </p>
* <p>
* There are no guarantees about the chronological order shards returned in
* <code>DescribeStream</code> results. If you want to process shards in
* chronological order, use <code>ParentShardId</code> to track lineage to
* the oldest shard.
* </p>
* <p>
* <a>DescribeStream</a> has a limit of 10 transactions per second per
* account.
* </p>
*
* @param describeStreamRequest <p>
* Represents the input for <code>DescribeStream</code>.
* </p>
* @return describeStreamResult The response from the DescribeStream service
* method, as returned by Amazon Kinesis Streams.
* @throws ResourceNotFoundException
* @throws LimitExceededException
* @throws AmazonClientException If any internal errors are encountered
* inside the client while attempting to make the request or
* handle the response. For example if a network connection is
* not available.
* @throws AmazonServiceException If an error response is returned by Amazon
* Kinesis Streams indicating either a problem with the data in
* the request, or a server side issue.
*/
DescribeStreamResult describeStream(DescribeStreamRequest describeStreamRequest)
throws AmazonClientException, AmazonServiceException;
/**
* <p>
* Disables enhanced monitoring.
* </p>
*
* @param disableEnhancedMonitoringRequest <p>
* Represents the input for <a>DisableEnhancedMonitoring</a>.
* </p>
* @return disableEnhancedMonitoringResult The response from the
* DisableEnhancedMonitoring service method, as returned by Amazon
* Kinesis Streams.
* @throws InvalidArgumentException
* @throws LimitExceededException
* @throws ResourceInUseException
* @throws ResourceNotFoundException
* @throws AmazonClientException If any internal errors are encountered
* inside the client while attempting to make the request or
* handle the response. For example if a network connection is
* not available.
* @throws AmazonServiceException If an error response is returned by Amazon
* Kinesis Streams indicating either a problem with the data in
* the request, or a server side issue.
*/
DisableEnhancedMonitoringResult disableEnhancedMonitoring(
DisableEnhancedMonitoringRequest disableEnhancedMonitoringRequest)
throws AmazonClientException, AmazonServiceException;
/**
* <p>
* Enables enhanced Amazon Kinesis stream monitoring for shard-level
* metrics.
* </p>
*
* @param enableEnhancedMonitoringRequest <p>
* Represents the input for <a>EnableEnhancedMonitoring</a>.
* </p>
* @return enableEnhancedMonitoringResult The response from the
* EnableEnhancedMonitoring service method, as returned by Amazon
* Kinesis Streams.
* @throws InvalidArgumentException
* @throws LimitExceededException
* @throws ResourceInUseException
* @throws ResourceNotFoundException
* @throws AmazonClientException If any internal errors are encountered
* inside the client while attempting to make the request or
* handle the response. For example if a network connection is
* not available.
* @throws AmazonServiceException If an error response is returned by Amazon
* Kinesis Streams indicating either a problem with the data in
* the request, or a server side issue.
*/
EnableEnhancedMonitoringResult enableEnhancedMonitoring(
EnableEnhancedMonitoringRequest enableEnhancedMonitoringRequest)
throws AmazonClientException, AmazonServiceException;
/**
* <p>
* Gets data records from an Amazon Kinesis stream's shard.
* </p>
* <p>
* Specify a shard iterator using the <code>ShardIterator</code> parameter.
* The shard iterator specifies the position in the shard from which you
* want to start reading data records sequentially. If there are no records
* available in the portion of the shard that the iterator points to,
* <a>GetRecords</a> returns an empty list. Note that it might take multiple
* calls to get to a portion of the shard that contains records.
* </p>
* <p>
* You can scale by provisioning multiple shards per stream while
* considering service limits (for more information, see <a href=
* "http://docs.aws.amazon.com/kinesis/latest/dev/service-sizes-and-limits.html"
* >Streams Limits</a> in the <i>Amazon Kinesis Streams Developer
* Guide</i>). Your application should have one thread per shard, each
* reading continuously from its stream. To read from a stream continually,
* call <a>GetRecords</a> in a loop. Use <a>GetShardIterator</a> to get the
* shard iterator to specify in the first <a>GetRecords</a> call.
* <a>GetRecords</a> returns a new shard iterator in
* <code>NextShardIterator</code>. Specify the shard iterator returned in
* <code>NextShardIterator</code> in subsequent calls to <a>GetRecords</a>.
* Note that if the shard has been closed, the shard iterator can't return
* more data and <a>GetRecords</a> returns <code>null</code> in
* <code>NextShardIterator</code>. You can terminate the loop when the shard
* is closed, or when the shard iterator reaches the record with the
* sequence number or other attribute that marks it as the last record to
* process.
* </p>
* <p>
* Each data record can be up to 1 MB in size, and each shard can read up to
* 2 MB per second. You can ensure that your calls don't exceed the maximum
* supported size or throughput by using the <code>Limit</code> parameter to
* specify the maximum number of records that <a>GetRecords</a> can return.
* Consider your average record size when determining this limit.
* </p>
* <p>
* The size of the data returned by <a>GetRecords</a> varies depending on
* the utilization of the shard. The maximum size of data that
* <a>GetRecords</a> can return is 10 MB. If a call returns this amount of
* data, subsequent calls made within the next 5 seconds throw
* <code>ProvisionedThroughputExceededException</code>. If there is
* insufficient provisioned throughput on the shard, subsequent calls made
* within the next 1 second throw
* <code>ProvisionedThroughputExceededException</code>. Note that
* <a>GetRecords</a> won't return any data when it throws an exception. For
* this reason, we recommend that you wait one second between calls to
* <a>GetRecords</a>; however, it's possible that the application will get
* exceptions for longer than 1 second.
* </p>
* <p>
* To detect whether the application is falling behind in processing, you
* can use the <code>MillisBehindLatest</code> response attribute. You can
* also monitor the stream using CloudWatch metrics and other mechanisms
* (see <a
* href="http://docs.aws.amazon.com/kinesis/latest/dev/monitoring.html"
* >Monitoring</a> in the <i>Amazon Kinesis Streams Developer Guide</i>).
* </p>
* <p>
* Each Amazon Kinesis record includes a value,
* <code>ApproximateArrivalTimestamp</code>, that is set when a stream
* successfully receives and stores a record. This is commonly referred to
* as a server-side timestamp, whereas a client-side timestamp is set when a
* data producer creates or sends the record to a stream (a data producer is
* any data source putting data records into a stream, for example with
* <a>PutRecords</a>). The timestamp has millisecond precision. There are no
* guarantees about the timestamp accuracy, or that the timestamp is always
* increasing. For example, records in a shard or across a stream might have
* timestamps that are out of order.
* </p>
*
* @param getRecordsRequest <p>
* Represents the input for <a>GetRecords</a>.
* </p>
* @return getRecordsResult The response from the GetRecords service method,
* as returned by Amazon Kinesis Streams.
* @throws ResourceNotFoundException
* @throws InvalidArgumentException
* @throws ProvisionedThroughputExceededException
* @throws ExpiredIteratorException
* @throws AmazonClientException If any internal errors are encountered
* inside the client while attempting to make the request or
* handle the response. For example if a network connection is
* not available.
* @throws AmazonServiceException If an error response is returned by Amazon
* Kinesis Streams indicating either a problem with the data in
* the request, or a server side issue.
*/
GetRecordsResult getRecords(GetRecordsRequest getRecordsRequest) throws AmazonClientException,
AmazonServiceException;
/**
* <p>
* Gets an Amazon Kinesis shard iterator. A shard iterator expires five
* minutes after it is returned to the requester.
* </p>
* <p>
* A shard iterator specifies the shard position from which to start reading
* data records sequentially. The position is specified using the sequence
* number of a data record in a shard. A sequence number is the identifier
* associated with every record ingested in the stream, and is assigned when
* a record is put into the stream. Each stream has one or more shards.
* </p>
* <p>
* You must specify the shard iterator type. For example, you can set the
* <code>ShardIteratorType</code> parameter to read exactly from the
* position denoted by a specific sequence number by using the
* <code>AT_SEQUENCE_NUMBER</code> shard iterator type, or right after the
* sequence number by using the <code>AFTER_SEQUENCE_NUMBER</code> shard
* iterator type, using sequence numbers returned by earlier calls to
* <a>PutRecord</a>, <a>PutRecords</a>, <a>GetRecords</a>, or
* <a>DescribeStream</a>. In the request, you can specify the shard iterator
* type <code>AT_TIMESTAMP</code> to read records from an arbitrary point in
* time, <code>TRIM_HORIZON</code> to cause <code>ShardIterator</code> to
* point to the last untrimmed record in the shard in the system (the oldest
* data record in the shard), or <code>LATEST</code> so that you always read
* the most recent data in the shard.
* </p>
* <p>
* When you read repeatedly from a stream, use a <a>GetShardIterator</a>
* request to get the first shard iterator for use in your first
* <a>GetRecords</a> request and for subsequent reads use the shard iterator
* returned by the <a>GetRecords</a> request in
* <code>NextShardIterator</code>. A new shard iterator is returned by every
* <a>GetRecords</a> request in <code>NextShardIterator</code>, which you
* use in the <code>ShardIterator</code> parameter of the next
* <a>GetRecords</a> request.
* </p>
* <p>
* If a <a>GetShardIterator</a> request is made too often, you receive a
* <code>ProvisionedThroughputExceededException</code>. For more information
* about throughput limits, see <a>GetRecords</a>, and <a href=
* "http://docs.aws.amazon.com/kinesis/latest/dev/service-sizes-and-limits.html"
* >Streams Limits</a> in the <i>Amazon Kinesis Streams Developer Guide</i>.
* </p>
* <p>
* If the shard is closed, <a>GetShardIterator</a> returns a valid iterator
* for the last sequence number of the shard. Note that a shard can be
* closed as a result of using <a>SplitShard</a> or <a>MergeShards</a>.
* </p>
* <p>
* <a>GetShardIterator</a> has a limit of 5 transactions per second per
* account per open shard.
* </p>
*
* @param getShardIteratorRequest <p>
* Represents the input for <code>GetShardIterator</code>.
* </p>
* @return getShardIteratorResult The response from the GetShardIterator
* service method, as returned by Amazon Kinesis Streams.
* @throws ResourceNotFoundException
* @throws InvalidArgumentException
* @throws ProvisionedThroughputExceededException
* @throws AmazonClientException If any internal errors are encountered
* inside the client while attempting to make the request or
* handle the response. For example if a network connection is
* not available.
* @throws AmazonServiceException If an error response is returned by Amazon
* Kinesis Streams indicating either a problem with the data in
* the request, or a server side issue.
*/
GetShardIteratorResult getShardIterator(GetShardIteratorRequest getShardIteratorRequest)
throws AmazonClientException, AmazonServiceException;
/**
* <p>
* Increases the Amazon Kinesis stream's retention period, which is the
* length of time data records are accessible after they are added to the
* stream. The maximum value of a stream's retention period is 168 hours (7
* days).
* </p>
* <p>
* Upon choosing a longer stream retention period, this operation will
* increase the time period records are accessible that have not yet
* expired. However, it will not make previous data that has expired (older
* than the stream's previous retention period) accessible after the
* operation has been called. For example, if a stream's retention period is
* set to 24 hours and is increased to 168 hours, any data that is older
* than 24 hours will remain inaccessible to consumer applications.
* </p>
*
* @param increaseStreamRetentionPeriodRequest <p>
* Represents the input for <a>IncreaseStreamRetentionPeriod</a>.
* </p>
* @throws ResourceInUseException
* @throws ResourceNotFoundException
* @throws LimitExceededException
* @throws InvalidArgumentException
* @throws AmazonClientException If any internal errors are encountered
* inside the client while attempting to make the request or
* handle the response. For example if a network connection is
* not available.
* @throws AmazonServiceException If an error response is returned by Amazon
* Kinesis Streams indicating either a problem with the data in
* the request, or a server side issue.
*/
void increaseStreamRetentionPeriod(
IncreaseStreamRetentionPeriodRequest increaseStreamRetentionPeriodRequest)
throws AmazonClientException, AmazonServiceException;
/**
* <p>
* Lists your Amazon Kinesis streams.
* </p>
* <p>
* The number of streams may be too large to return from a single call to
* <code>ListStreams</code>. You can limit the number of returned streams
* using the <code>Limit</code> parameter. If you do not specify a value for
* the <code>Limit</code> parameter, Amazon Kinesis uses the default limit,
* which is currently 10.
* </p>
* <p>
* You can detect if there are more streams available to list by using the
* <code>HasMoreStreams</code> flag from the returned output. If there are
* more streams available, you can request more streams by using the name of
* the last stream returned by the <code>ListStreams</code> request in the
* <code>ExclusiveStartStreamName</code> parameter in a subsequent request
* to <code>ListStreams</code>. The group of stream names returned by the
* subsequent request is then added to the list. You can continue this
* process until all the stream names have been collected in the list.
* </p>
* <p>
* <a>ListStreams</a> has a limit of 5 transactions per second per account.
* </p>
*
* @param listStreamsRequest <p>
* Represents the input for <code>ListStreams</code>.
* </p>
* @return listStreamsResult The response from the ListStreams service
* method, as returned by Amazon Kinesis Streams.
* @throws LimitExceededException
* @throws AmazonClientException If any internal errors are encountered
* inside the client while attempting to make the request or
* handle the response. For example if a network connection is
* not available.
* @throws AmazonServiceException If an error response is returned by Amazon
* Kinesis Streams indicating either a problem with the data in
* the request, or a server side issue.
*/
ListStreamsResult listStreams(ListStreamsRequest listStreamsRequest)
throws AmazonClientException, AmazonServiceException;
/**
* <p>
* Lists the tags for the specified Amazon Kinesis stream.
* </p>
*
* @param listTagsForStreamRequest <p>
* Represents the input for <code>ListTagsForStream</code>.
* </p>
* @return listTagsForStreamResult The response from the ListTagsForStream
* service method, as returned by Amazon Kinesis Streams.
* @throws ResourceNotFoundException
* @throws InvalidArgumentException
* @throws LimitExceededException
* @throws AmazonClientException If any internal errors are encountered
* inside the client while attempting to make the request or
* handle the response. For example if a network connection is
* not available.
* @throws AmazonServiceException If an error response is returned by Amazon
* Kinesis Streams indicating either a problem with the data in
* the request, or a server side issue.
*/
ListTagsForStreamResult listTagsForStream(ListTagsForStreamRequest listTagsForStreamRequest)
throws AmazonClientException, AmazonServiceException;
/**
* <p>
* Merges two adjacent shards in an Amazon Kinesis stream and combines them
* into a single shard to reduce the stream's capacity to ingest and
* transport data. Two shards are considered adjacent if the union of the
* hash key ranges for the two shards form a contiguous set with no gaps.
* For example, if you have two shards, one with a hash key range of
* 276...381 and the other with a hash key range of 382...454, then you
* could merge these two shards into a single shard that would have a hash
* key range of 276...454. After the merge, the single child shard receives
* data for all hash key values covered by the two parent shards.
* </p>
* <p>
* <code>MergeShards</code> is called when there is a need to reduce the
* overall capacity of a stream because of excess capacity that is not being
* used. You must specify the shard to be merged and the adjacent shard for
* a stream. For more information about merging shards, see <a href=
* "http://docs.aws.amazon.com/kinesis/latest/dev/kinesis-using-sdk-java-resharding-merge.html"
* >Merge Two Shards</a> in the <i>Amazon Kinesis Streams Developer
* Guide</i>.
* </p>
* <p>
* If the stream is in the <code>ACTIVE</code> state, you can call
* <code>MergeShards</code>. If a stream is in the <code>CREATING</code>,
* <code>UPDATING</code>, or <code>DELETING</code> state,
* <code>MergeShards</code> returns a <code>ResourceInUseException</code>.
* If the specified stream does not exist, <code>MergeShards</code> returns
* a <code>ResourceNotFoundException</code>.
* </p>
* <p>
* You can use <a>DescribeStream</a> to check the state of the stream, which
* is returned in <code>StreamStatus</code>.
* </p>
* <p>
* <code>MergeShards</code> is an asynchronous operation. Upon receiving a
* <code>MergeShards</code> request, Amazon Kinesis immediately returns a
* response and sets the <code>StreamStatus</code> to <code>UPDATING</code>.
* After the operation is completed, Amazon Kinesis sets the
* <code>StreamStatus</code> to <code>ACTIVE</code>. Read and write
* operations continue to work while the stream is in the
* <code>UPDATING</code> state.
* </p>
* <p>
* You use <a>DescribeStream</a> to determine the shard IDs that are
* specified in the <code>MergeShards</code> request.
* </p>
* <p>
* If you try to operate on too many streams in parallel using
* <a>CreateStream</a>, <a>DeleteStream</a>, <code>MergeShards</code> or
* <a>SplitShard</a>, you will receive a <code>LimitExceededException</code>
* .
* </p>
* <p>
* <code>MergeShards</code> has limit of 5 transactions per second per
* account.
* </p>
*
* @param mergeShardsRequest <p>
* Represents the input for <code>MergeShards</code>.
* </p>
* @throws ResourceNotFoundException
* @throws ResourceInUseException
* @throws InvalidArgumentException
* @throws LimitExceededException
* @throws AmazonClientException If any internal errors are encountered
* inside the client while attempting to make the request or
* handle the response. For example if a network connection is
* not available.
* @throws AmazonServiceException If an error response is returned by Amazon
* Kinesis Streams indicating either a problem with the data in
* the request, or a server side issue.
*/
void mergeShards(MergeShardsRequest mergeShardsRequest) throws AmazonClientException,
AmazonServiceException;
/**
* <p>
* Writes a single data record into an Amazon Kinesis stream. Call
* <code>PutRecord</code> to send data into the stream for real-time
* ingestion and subsequent processing, one record at a time. Each shard can
* support writes up to 1,000 records per second, up to a maximum data write
* total of 1 MB per second.
* </p>
* <p>
* You must specify the name of the stream that captures, stores, and
* transports the data; a partition key; and the data blob itself.
* </p>
* <p>
* The data blob can be any type of data; for example, a segment from a log
* file, geographic/location data, website clickstream data, and so on.
* </p>
* <p>
* The partition key is used by Amazon Kinesis to distribute data across
* shards. Amazon Kinesis segregates the data records that belong to a
* stream into multiple shards, using the partition key associated with each
* data record to determine which shard a given data record belongs to.
* </p>
* <p>
* Partition keys are Unicode strings, with a maximum length limit of 256
* characters for each key. An MD5 hash function is used to map partition
* keys to 128-bit integer values and to map associated data records to
* shards using the hash key ranges of the shards. You can override hashing
* the partition key to determine the shard by explicitly specifying a hash
* value using the <code>ExplicitHashKey</code> parameter. For more
* information, see <a href=
* "http://docs.aws.amazon.com/kinesis/latest/dev/developing-producers-with-sdk.html#kinesis-using-sdk-java-add-data-to-stream"
* >Adding Data to a Stream</a> in the <i>Amazon Kinesis Streams Developer
* Guide</i>.
* </p>
* <p>
* <code>PutRecord</code> returns the shard ID of where the data record was
* placed and the sequence number that was assigned to the data record.
* </p>
* <p>
* Sequence numbers increase over time and are specific to a shard within a
* stream, not across all shards within a stream. To guarantee strictly
* increasing ordering, write serially to a shard and use the
* <code>SequenceNumberForOrdering</code> parameter. For more information,
* see <a href=
* "http://docs.aws.amazon.com/kinesis/latest/dev/developing-producers-with-sdk.html#kinesis-using-sdk-java-add-data-to-stream"
* >Adding Data to a Stream</a> in the <i>Amazon Kinesis Streams Developer
* Guide</i>.
* </p>
* <p>
* If a <code>PutRecord</code> request cannot be processed because of
* insufficient provisioned throughput on the shard involved in the request,
* <code>PutRecord</code> throws
* <code>ProvisionedThroughputExceededException</code>.
* </p>
* <p>
* Data records are accessible for only 24 hours from the time that they are
* added to a stream.
* </p>
*
* @param putRecordRequest <p>
* Represents the input for <code>PutRecord</code>.
* </p>
* @return putRecordResult The response from the PutRecord service method,
* as returned by Amazon Kinesis Streams.
* @throws ResourceNotFoundException
* @throws InvalidArgumentException
* @throws ProvisionedThroughputExceededException
* @throws AmazonClientException If any internal errors are encountered
* inside the client while attempting to make the request or
* handle the response. For example if a network connection is
* not available.
* @throws AmazonServiceException If an error response is returned by Amazon
* Kinesis Streams indicating either a problem with the data in
* the request, or a server side issue.
*/
PutRecordResult putRecord(PutRecordRequest putRecordRequest) throws AmazonClientException,
AmazonServiceException;
/**
* <p>
* Writes multiple data records into an Amazon Kinesis stream in a single
* call (also referred to as a <code>PutRecords</code> request). Use this
* operation to send data into the stream for data ingestion and processing.
* </p>
* <p>
* Each <code>PutRecords</code> request can support up to 500 records. Each
* record in the request can be as large as 1 MB, up to a limit of 5 MB for
* the entire request, including partition keys. Each shard can support
* writes up to 1,000 records per second, up to a maximum data write total
* of 1 MB per second.
* </p>
* <p>
* You must specify the name of the stream that captures, stores, and
* transports the data; and an array of request <code>Records</code>, with
* each record in the array requiring a partition key and data blob. The
* record size limit applies to the total size of the partition key and data
* blob.
* </p>
* <p>
* The data blob can be any type of data; for example, a segment from a log
* file, geographic/location data, website clickstream data, and so on.
* </p>
* <p>
* The partition key is used by Amazon Kinesis as input to a hash function
* that maps the partition key and associated data to a specific shard. An
* MD5 hash function is used to map partition keys to 128-bit integer values
* and to map associated data records to shards. As a result of this hashing
* mechanism, all data records with the same partition key map to the same
* shard within the stream. For more information, see <a href=
* "http://docs.aws.amazon.com/kinesis/latest/dev/developing-producers-with-sdk.html#kinesis-using-sdk-java-add-data-to-stream"
* >Adding Data to a Stream</a> in the <i>Amazon Kinesis Streams Developer
* Guide</i>.
* </p>
* <p>
* Each record in the <code>Records</code> array may include an optional
* parameter, <code>ExplicitHashKey</code>, which overrides the partition
* key to shard mapping. This parameter allows a data producer to determine
* explicitly the shard where the record is stored. For more information,
* see <a href=
* "http://docs.aws.amazon.com/kinesis/latest/dev/developing-producers-with-sdk.html#kinesis-using-sdk-java-putrecords"
* >Adding Multiple Records with PutRecords</a> in the <i>Amazon Kinesis
* Streams Developer Guide</i>.
* </p>
* <p>
* The <code>PutRecords</code> response includes an array of response
* <code>Records</code>. Each record in the response array directly
* correlates with a record in the request array using natural ordering,
* from the top to the bottom of the request and response. The response
* <code>Records</code> array always includes the same number of records as
* the request array.
* </p>
* <p>
* The response <code>Records</code> array includes both successfully and
* unsuccessfully processed records. Amazon Kinesis attempts to process all
* records in each <code>PutRecords</code> request. A single record failure
* does not stop the processing of subsequent records.
* </p>
* <p>
* A successfully-processed record includes <code>ShardId</code> and
* <code>SequenceNumber</code> values. The <code>ShardId</code> parameter
* identifies the shard in the stream where the record is stored. The
* <code>SequenceNumber</code> parameter is an identifier assigned to the
* put record, unique to all records in the stream.
* </p>
* <p>
* An unsuccessfully-processed record includes <code>ErrorCode</code> and
* <code>ErrorMessage</code> values. <code>ErrorCode</code> reflects the
* type of error and can be one of the following values:
* <code>ProvisionedThroughputExceededException</code> or
* <code>InternalFailure</code>. <code>ErrorMessage</code> provides more
* detailed information about the
* <code>ProvisionedThroughputExceededException</code> exception including
* the account ID, stream name, and shard ID of the record that was
* throttled. For more information about partially successful responses, see
* <a href=
* "http://docs.aws.amazon.com/kinesis/latest/dev/kinesis-using-sdk-java-add-data-to-stream.html#kinesis-using-sdk-java-putrecords"
* >Adding Multiple Records with PutRecords</a> in the <i>Amazon Kinesis
* Streams Developer Guide</i>.
* </p>
* <p>
* By default, data records are accessible for only 24 hours from the time
* that they are added to an Amazon Kinesis stream. This retention period
* can be modified using the <a>DecreaseStreamRetentionPeriod</a> and
* <a>IncreaseStreamRetentionPeriod</a> operations.
* </p>
*
* @param putRecordsRequest <p>
* A <code>PutRecords</code> request.
* </p>
* @return putRecordsResult The response from the PutRecords service method,
* as returned by Amazon Kinesis Streams.
* @throws ResourceNotFoundException
* @throws InvalidArgumentException
* @throws ProvisionedThroughputExceededException
* @throws AmazonClientException If any internal errors are encountered
* inside the client while attempting to make the request or
* handle the response. For example if a network connection is
* not available.
* @throws AmazonServiceException If an error response is returned by Amazon
* Kinesis Streams indicating either a problem with the data in
* the request, or a server side issue.
*/
PutRecordsResult putRecords(PutRecordsRequest putRecordsRequest) throws AmazonClientException,
AmazonServiceException;
/**
* <p>
* Removes tags from the specified Amazon Kinesis stream. Removed tags are
* deleted and cannot be recovered after this operation successfully
* completes.
* </p>
* <p>
* If you specify a tag that does not exist, it is ignored.
* </p>
*
* @param removeTagsFromStreamRequest <p>
* Represents the input for <code>RemoveTagsFromStream</code>.
* </p>
* @throws ResourceNotFoundException
* @throws ResourceInUseException
* @throws InvalidArgumentException
* @throws LimitExceededException
* @throws AmazonClientException If any internal errors are encountered
* inside the client while attempting to make the request or
* handle the response. For example if a network connection is
* not available.
* @throws AmazonServiceException If an error response is returned by Amazon
* Kinesis Streams indicating either a problem with the data in
* the request, or a server side issue.
*/
void removeTagsFromStream(RemoveTagsFromStreamRequest removeTagsFromStreamRequest)
throws AmazonClientException, AmazonServiceException;
/**
* <p>
* Splits a shard into two new shards in the Amazon Kinesis stream to
* increase the stream's capacity to ingest and transport data.
* <code>SplitShard</code> is called when there is a need to increase the
* overall capacity of a stream because of an expected increase in the
* volume of data records being ingested.
* </p>
* <p>
* You can also use <code>SplitShard</code> when a shard appears to be
* approaching its maximum utilization; for example, the producers sending
* data into the specific shard are suddenly sending more than previously
* anticipated. You can also call <code>SplitShard</code> to increase stream
* capacity, so that more Amazon Kinesis applications can simultaneously
* read data from the stream for real-time processing.
* </p>
* <p>
* You must specify the shard to be split and the new hash key, which is the
* position in the shard where the shard gets split in two. In many cases,
* the new hash key might simply be the average of the beginning and ending
* hash key, but it can be any hash key value in the range being mapped into
* the shard. For more information about splitting shards, see <a href=
* "http://docs.aws.amazon.com/kinesis/latest/dev/kinesis-using-sdk-java-resharding-split.html"
* >Split a Shard</a> in the <i>Amazon Kinesis Streams Developer Guide</i>.
* </p>
* <p>
* You can use <a>DescribeStream</a> to determine the shard ID and hash key
* values for the <code>ShardToSplit</code> and
* <code>NewStartingHashKey</code> parameters that are specified in the
* <code>SplitShard</code> request.
* </p>
* <p>
* <code>SplitShard</code> is an asynchronous operation. Upon receiving a
* <code>SplitShard</code> request, Amazon Kinesis immediately returns a
* response and sets the stream status to <code>UPDATING</code>. After the
* operation is completed, Amazon Kinesis sets the stream status to
* <code>ACTIVE</code>. Read and write operations continue to work while the
* stream is in the <code>UPDATING</code> state.
* </p>
* <p>
* You can use <code>DescribeStream</code> to check the status of the
* stream, which is returned in <code>StreamStatus</code>. If the stream is
* in the <code>ACTIVE</code> state, you can call <code>SplitShard</code>.
* If a stream is in <code>CREATING</code> or <code>UPDATING</code> or
* <code>DELETING</code> states, <code>DescribeStream</code> returns a
* <code>ResourceInUseException</code>.
* </p>
* <p>
* If the specified stream does not exist, <code>DescribeStream</code>
* returns a <code>ResourceNotFoundException</code>. If you try to create
* more shards than are authorized for your account, you receive a
* <code>LimitExceededException</code>.
* </p>
* <p>
* For the default shard limit for an AWS account, see <a href=
* "http://docs.aws.amazon.com/kinesis/latest/dev/service-sizes-and-limits.html"
* >Streams Limits</a> in the <i>Amazon Kinesis Streams Developer Guide</i>.
* If you need to increase this limit, <a href=
* "http://docs.aws.amazon.com/general/latest/gr/aws_service_limits.html"
* >contact AWS Support</a>.
* </p>
* <p>
* If you try to operate on too many streams simultaneously using
* <a>CreateStream</a>, <a>DeleteStream</a>, <a>MergeShards</a>, and/or
* <a>SplitShard</a>, you receive a <code>LimitExceededException</code>.
* </p>
* <p>
* <code>SplitShard</code> has limit of 5 transactions per second per
* account.
* </p>
*
* @param splitShardRequest <p>
* Represents the input for <code>SplitShard</code>.
* </p>
* @throws ResourceNotFoundException
* @throws ResourceInUseException
* @throws InvalidArgumentException
* @throws LimitExceededException
* @throws AmazonClientException If any internal errors are encountered
* inside the client while attempting to make the request or
* handle the response. For example if a network connection is
* not available.
* @throws AmazonServiceException If an error response is returned by Amazon
* Kinesis Streams indicating either a problem with the data in
* the request, or a server side issue.
*/
void splitShard(SplitShardRequest splitShardRequest) throws AmazonClientException,
AmazonServiceException;
/**
* <p>
* Creates an Amazon Kinesis stream. A stream captures and transports data
* records that are continuously emitted from different data sources or
* <i>producers</i>. Scale-out within a stream is explicitly supported by
* means of shards, which are uniquely identified groups of data records in
* a stream.
* </p>
* <p>
* You specify and control the number of shards that a stream is composed
* of. Each shard can support reads up to 5 transactions per second, up to a
* maximum data read total of 2 MB per second. Each shard can support writes
* up to 1,000 records per second, up to a maximum data write total of 1 MB
* per second. You can add shards to a stream if the amount of data input
* increases and you can remove shards if the amount of data input
* decreases.
* </p>
* <p>
* The stream name identifies the stream. The name is scoped to the AWS
* account used by the application. It is also scoped by region. That is,
* two streams in two different accounts can have the same name, and two
* streams in the same account, but in two different regions, can have the
* same name.
* </p>
* <p>
* <code>CreateStream</code> is an asynchronous operation. Upon receiving a
* <code>CreateStream</code> request, Amazon Kinesis immediately returns and
* sets the stream status to <code>CREATING</code>. After the stream is
* created, Amazon Kinesis sets the stream status to <code>ACTIVE</code>.
* You should perform read and write operations only on an
* <code>ACTIVE</code> stream.
* </p>
* <p>
* You receive a <code>LimitExceededException</code> when making a
* <code>CreateStream</code> request if you try to do one of the following:
* </p>
* <ul>
* <li>Have more than five streams in the <code>CREATING</code> state at any
* point in time.</li>
* <li>Create more shards than are authorized for your account.</li>
* </ul>
* <p>
* For the default shard limit for an AWS account, see <a href=
* "http://docs.aws.amazon.com/kinesis/latest/dev/service-sizes-and-limits.html"
* >Streams Limits</a> in the <i>Amazon Kinesis Streams Developer Guide</i>.
* If you need to increase this limit, <a href=
* "http://docs.aws.amazon.com/general/latest/gr/aws_service_limits.html"
* >contact AWS Support</a>.
* </p>
* <p>
* You can use <code>DescribeStream</code> to check the stream status, which
* is returned in <code>StreamStatus</code>.
* </p>
* <p>
* <a>CreateStream</a> has a limit of 5 transactions per second per account.
* </p>
*
* @param streamName <p>
* A name to identify the stream. The stream name is scoped to
* the AWS account used by the application that creates the
* stream. It is also scoped by region. That is, two streams in
* two different AWS accounts can have the same name, and two
* streams in the same AWS account but in two different regions
* can have the same name.
* </p>
* @param shardCount <p>
* The number of shards that the stream will use. The throughput
* of the stream is a function of the number of shards; more
* shards are required for greater provisioned throughput.
* </p>
* <p>
* DefaultShardLimit;
* </p>
* @throws ResourceInUseException
* @throws LimitExceededException
* @throws InvalidArgumentException
* @throws AmazonClientException If any internal errors are encountered
* inside the client while attempting to make the request or
* handle the response. For example if a network connection is
* not available.
* @throws AmazonServiceException If an error response is returned by Amazon
* Kinesis Streams indicating either a problem with the data in
* the request, or a server side issue.
*/
void createStream(String streamName, Integer shardCount) throws AmazonClientException,
AmazonServiceException;
/**
* <p>
* Deletes an Amazon Kinesis stream and all its shards and data. You must
* shut down any applications that are operating on the stream before you
* delete the stream. If an application attempts to operate on a deleted
* stream, it will receive the exception
* <code>ResourceNotFoundException</code>.
* </p>
* <p>
* If the stream is in the <code>ACTIVE</code> state, you can delete it.
* After a <code>DeleteStream</code> request, the specified stream is in the
* <code>DELETING</code> state until Amazon Kinesis completes the deletion.
* </p>
* <p>
* <b>Note:</b> Amazon Kinesis might continue to accept data read and write
* operations, such as <a>PutRecord</a>, <a>PutRecords</a>, and
* <a>GetRecords</a>, on a stream in the <code>DELETING</code> state until
* the stream deletion is complete.
* </p>
* <p>
* When you delete a stream, any shards in that stream are also deleted, and
* any tags are dissociated from the stream.
* </p>
* <p>
* You can use the <a>DescribeStream</a> operation to check the state of the
* stream, which is returned in <code>StreamStatus</code>.
* </p>
* <p>
* <a>DeleteStream</a> has a limit of 5 transactions per second per account.
* </p>
*
* @param streamName <p>
* The name of the stream to delete.
* </p>
* @throws ResourceNotFoundException
* @throws LimitExceededException
* @throws AmazonClientException If any internal errors are encountered
* inside the client while attempting to make the request or
* handle the response. For example if a network connection is
* not available.
* @throws AmazonServiceException If an error response is returned by Amazon
* Kinesis Streams indicating either a problem with the data in
* the request, or a server side issue.
*/
void deleteStream(String streamName) throws AmazonClientException, AmazonServiceException;
/**
* <p>
* Describes the specified Amazon Kinesis stream.
* </p>
* <p>
* The information about the stream includes its current status, its Amazon
* Resource Name (ARN), and an array of shard objects. For each shard
* object, there is information about the hash key and sequence number
* ranges that the shard spans, and the IDs of any earlier shards that
* played in a role in creating the shard. A sequence number is the
* identifier associated with every record ingested in the stream. The
* sequence number is assigned when a record is put into the stream.
* </p>
* <p>
* You can limit the number of returned shards using the <code>Limit</code>
* parameter. The number of shards in a stream may be too large to return
* from a single call to <code>DescribeStream</code>. You can detect this by
* using the <code>HasMoreShards</code> flag in the returned output.
* <code>HasMoreShards</code> is set to <code>true</code> when there is more
* data available.
* </p>
* <p>
* <code>DescribeStream</code> is a paginated operation. If there are more
* shards available, you can request them using the shard ID of the last
* shard returned. Specify this ID in the <code>ExclusiveStartShardId</code>
* parameter in a subsequent request to <code>DescribeStream</code>.
* </p>
* <p>
* There are no guarantees about the chronological order shards returned in
* <code>DescribeStream</code> results. If you want to process shards in
* chronological order, use <code>ParentShardId</code> to track lineage to
* the oldest shard.
* </p>
* <p>
* <a>DescribeStream</a> has a limit of 10 transactions per second per
* account.
* </p>
*
* @param streamName <p>
* The name of the stream to describe.
* </p>
* @return describeStreamResult The response from the DescribeStream service
* method, as returned by Amazon Kinesis Streams.
* @throws ResourceNotFoundException
* @throws LimitExceededException
* @throws AmazonClientException If any internal errors are encountered
* inside the client while attempting to make the request or
* handle the response. For example if a network connection is
* not available.
* @throws AmazonServiceException If an error response is returned by Amazon
* Kinesis Streams indicating either a problem with the data in
* the request, or a server side issue.
*/
DescribeStreamResult describeStream(String streamName) throws AmazonClientException,
AmazonServiceException;
/**
* <p>
* Describes the specified Amazon Kinesis stream.
* </p>
* <p>
* The information about the stream includes its current status, its Amazon
* Resource Name (ARN), and an array of shard objects. For each shard
* object, there is information about the hash key and sequence number
* ranges that the shard spans, and the IDs of any earlier shards that
* played in a role in creating the shard. A sequence number is the
* identifier associated with every record ingested in the stream. The
* sequence number is assigned when a record is put into the stream.
* </p>
* <p>
* You can limit the number of returned shards using the <code>Limit</code>
* parameter. The number of shards in a stream may be too large to return
* from a single call to <code>DescribeStream</code>. You can detect this by
* using the <code>HasMoreShards</code> flag in the returned output.
* <code>HasMoreShards</code> is set to <code>true</code> when there is more
* data available.
* </p>
* <p>
* <code>DescribeStream</code> is a paginated operation. If there are more
* shards available, you can request them using the shard ID of the last
* shard returned. Specify this ID in the <code>ExclusiveStartShardId</code>
* parameter in a subsequent request to <code>DescribeStream</code>.
* </p>
* <p>
* There are no guarantees about the chronological order shards returned in
* <code>DescribeStream</code> results. If you want to process shards in
* chronological order, use <code>ParentShardId</code> to track lineage to
* the oldest shard.
* </p>
* <p>
* <a>DescribeStream</a> has a limit of 10 transactions per second per
* account.
* </p>
*
* @param streamName <p>
* The name of the stream to describe.
* </p>
* @param exclusiveStartShardId <p>
* The shard ID of the shard to start with.
* </p>
* @return describeStreamResult The response from the DescribeStream service
* method, as returned by Amazon Kinesis Streams.
* @throws ResourceNotFoundException
* @throws LimitExceededException
* @throws AmazonClientException If any internal errors are encountered
* inside the client while attempting to make the request or
* handle the response. For example if a network connection is
* not available.
* @throws AmazonServiceException If an error response is returned by Amazon
* Kinesis Streams indicating either a problem with the data in
* the request, or a server side issue.
*/
DescribeStreamResult describeStream(String streamName, String exclusiveStartShardId)
throws AmazonClientException, AmazonServiceException;
/**
* <p>
* Describes the specified Amazon Kinesis stream.
* </p>
* <p>
* The information about the stream includes its current status, its Amazon
* Resource Name (ARN), and an array of shard objects. For each shard
* object, there is information about the hash key and sequence number
* ranges that the shard spans, and the IDs of any earlier shards that
* played in a role in creating the shard. A sequence number is the
* identifier associated with every record ingested in the stream. The
* sequence number is assigned when a record is put into the stream.
* </p>
* <p>
* You can limit the number of returned shards using the <code>Limit</code>
* parameter. The number of shards in a stream may be too large to return
* from a single call to <code>DescribeStream</code>. You can detect this by
* using the <code>HasMoreShards</code> flag in the returned output.
* <code>HasMoreShards</code> is set to <code>true</code> when there is more
* data available.
* </p>
* <p>
* <code>DescribeStream</code> is a paginated operation. If there are more
* shards available, you can request them using the shard ID of the last
* shard returned. Specify this ID in the <code>ExclusiveStartShardId</code>
* parameter in a subsequent request to <code>DescribeStream</code>.
* </p>
* <p>
* There are no guarantees about the chronological order shards returned in
* <code>DescribeStream</code> results. If you want to process shards in
* chronological order, use <code>ParentShardId</code> to track lineage to
* the oldest shard.
* </p>
* <p>
* <a>DescribeStream</a> has a limit of 10 transactions per second per
* account.
* </p>
*
* @param streamName <p>
* The name of the stream to describe.
* </p>
* @param limit <p>
* The maximum number of shards to return.
* </p>
* @param exclusiveStartShardId <p>
* The shard ID of the shard to start with.
* </p>
* @return describeStreamResult The response from the DescribeStream service
* method, as returned by Amazon Kinesis Streams.
* @throws ResourceNotFoundException
* @throws LimitExceededException
* @throws AmazonClientException If any internal errors are encountered
* inside the client while attempting to make the request or
* handle the response. For example if a network connection is
* not available.
* @throws AmazonServiceException If an error response is returned by Amazon
* Kinesis Streams indicating either a problem with the data in
* the request, or a server side issue.
*/
DescribeStreamResult describeStream(String streamName, Integer limit,
String exclusiveStartShardId) throws AmazonClientException, AmazonServiceException;
/**
* <p>
* Lists your Amazon Kinesis streams.
* </p>
* <p>
* The number of streams may be too large to return from a single call to
* <code>ListStreams</code>. You can limit the number of returned streams
* using the <code>Limit</code> parameter. If you do not specify a value for
* the <code>Limit</code> parameter, Amazon Kinesis uses the default limit,
* which is currently 10.
* </p>
* <p>
* You can detect if there are more streams available to list by using the
* <code>HasMoreStreams</code> flag from the returned output. If there are
* more streams available, you can request more streams by using the name of
* the last stream returned by the <code>ListStreams</code> request in the
* <code>ExclusiveStartStreamName</code> parameter in a subsequent request
* to <code>ListStreams</code>. The group of stream names returned by the
* subsequent request is then added to the list. You can continue this
* process until all the stream names have been collected in the list.
* </p>
* <p>
* <a>ListStreams</a> has a limit of 5 transactions per second per account.
* </p>
*
* @return listStreamsResult The response from the ListStreams service
* method, as returned by Amazon Kinesis Streams.
* @throws LimitExceededException
* @throws AmazonClientException If any internal errors are encountered
* inside the client while attempting to make the request or
* handle the response. For example if a network connection is
* not available.
* @throws AmazonServiceException If an error response is returned by Amazon
* Kinesis Streams indicating either a problem with the data in
* the request, or a server side issue.
*/
ListStreamsResult listStreams() throws AmazonClientException, AmazonServiceException;
/**
* <p>
* Lists your Amazon Kinesis streams.
* </p>
* <p>
* The number of streams may be too large to return from a single call to
* <code>ListStreams</code>. You can limit the number of returned streams
* using the <code>Limit</code> parameter. If you do not specify a value for
* the <code>Limit</code> parameter, Amazon Kinesis uses the default limit,
* which is currently 10.
* </p>
* <p>
* You can detect if there are more streams available to list by using the
* <code>HasMoreStreams</code> flag from the returned output. If there are
* more streams available, you can request more streams by using the name of
* the last stream returned by the <code>ListStreams</code> request in the
* <code>ExclusiveStartStreamName</code> parameter in a subsequent request
* to <code>ListStreams</code>. The group of stream names returned by the
* subsequent request is then added to the list. You can continue this
* process until all the stream names have been collected in the list.
* </p>
* <p>
* <a>ListStreams</a> has a limit of 5 transactions per second per account.
* </p>
*
* @param exclusiveStartStreamName <p>
* The name of the stream to start the list with.
* </p>
* @return listStreamsResult The response from the ListStreams service
* method, as returned by Amazon Kinesis Streams.
* @throws LimitExceededException
* @throws AmazonClientException If any internal errors are encountered
* inside the client while attempting to make the request or
* handle the response. For example if a network connection is
* not available.
* @throws AmazonServiceException If an error response is returned by Amazon
* Kinesis Streams indicating either a problem with the data in
* the request, or a server side issue.
*/
ListStreamsResult listStreams(String exclusiveStartStreamName) throws AmazonClientException,
AmazonServiceException;
/**
* <p>
* Lists your Amazon Kinesis streams.
* </p>
* <p>
* The number of streams may be too large to return from a single call to
* <code>ListStreams</code>. You can limit the number of returned streams
* using the <code>Limit</code> parameter. If you do not specify a value for
* the <code>Limit</code> parameter, Amazon Kinesis uses the default limit,
* which is currently 10.
* </p>
* <p>
* You can detect if there are more streams available to list by using the
* <code>HasMoreStreams</code> flag from the returned output. If there are
* more streams available, you can request more streams by using the name of
* the last stream returned by the <code>ListStreams</code> request in the
* <code>ExclusiveStartStreamName</code> parameter in a subsequent request
* to <code>ListStreams</code>. The group of stream names returned by the
* subsequent request is then added to the list. You can continue this
* process until all the stream names have been collected in the list.
* </p>
* <p>
* <a>ListStreams</a> has a limit of 5 transactions per second per account.
* </p>
*
* @param limit <p>
* The maximum number of streams to list.
* </p>
* @param exclusiveStartStreamName <p>
* The name of the stream to start the list with.
* </p>
* @return listStreamsResult The response from the ListStreams service
* method, as returned by Amazon Kinesis Streams.
* @throws LimitExceededException
* @throws AmazonClientException If any internal errors are encountered
* inside the client while attempting to make the request or
* handle the response. For example if a network connection is
* not available.
* @throws AmazonServiceException If an error response is returned by Amazon
* Kinesis Streams indicating either a problem with the data in
* the request, or a server side issue.
*/
ListStreamsResult listStreams(Integer limit, String exclusiveStartStreamName)
throws AmazonClientException, AmazonServiceException;
/**
* <p>
* Merges two adjacent shards in an Amazon Kinesis stream and combines them
* into a single shard to reduce the stream's capacity to ingest and
* transport data. Two shards are considered adjacent if the union of the
* hash key ranges for the two shards form a contiguous set with no gaps.
* For example, if you have two shards, one with a hash key range of
* 276...381 and the other with a hash key range of 382...454, then you
* could merge these two shards into a single shard that would have a hash
* key range of 276...454. After the merge, the single child shard receives
* data for all hash key values covered by the two parent shards.
* </p>
* <p>
* <code>MergeShards</code> is called when there is a need to reduce the
* overall capacity of a stream because of excess capacity that is not being
* used. You must specify the shard to be merged and the adjacent shard for
* a stream. For more information about merging shards, see <a href=
* "http://docs.aws.amazon.com/kinesis/latest/dev/kinesis-using-sdk-java-resharding-merge.html"
* >Merge Two Shards</a> in the <i>Amazon Kinesis Streams Developer
* Guide</i>.
* </p>
* <p>
* If the stream is in the <code>ACTIVE</code> state, you can call
* <code>MergeShards</code>. If a stream is in the <code>CREATING</code>,
* <code>UPDATING</code>, or <code>DELETING</code> state,
* <code>MergeShards</code> returns a <code>ResourceInUseException</code>.
* If the specified stream does not exist, <code>MergeShards</code> returns
* a <code>ResourceNotFoundException</code>.
* </p>
* <p>
* You can use <a>DescribeStream</a> to check the state of the stream, which
* is returned in <code>StreamStatus</code>.
* </p>
* <p>
* <code>MergeShards</code> is an asynchronous operation. Upon receiving a
* <code>MergeShards</code> request, Amazon Kinesis immediately returns a
* response and sets the <code>StreamStatus</code> to <code>UPDATING</code>.
* After the operation is completed, Amazon Kinesis sets the
* <code>StreamStatus</code> to <code>ACTIVE</code>. Read and write
* operations continue to work while the stream is in the
* <code>UPDATING</code> state.
* </p>
* <p>
* You use <a>DescribeStream</a> to determine the shard IDs that are
* specified in the <code>MergeShards</code> request.
* </p>
* <p>
* If you try to operate on too many streams in parallel using
* <a>CreateStream</a>, <a>DeleteStream</a>, <code>MergeShards</code> or
* <a>SplitShard</a>, you will receive a <code>LimitExceededException</code>
* .
* </p>
* <p>
* <code>MergeShards</code> has limit of 5 transactions per second per
* account.
* </p>
*
* @param streamName <p>
* The name of the stream for the merge.
* </p>
* @param shardToMerge <p>
* The shard ID of the shard to combine with the adjacent shard
* for the merge.
* </p>
* @param adjacentShardToMerge <p>
* The shard ID of the adjacent shard for the merge.
* </p>
* @throws ResourceNotFoundException
* @throws ResourceInUseException
* @throws InvalidArgumentException
* @throws LimitExceededException
* @throws AmazonClientException If any internal errors are encountered
* inside the client while attempting to make the request or
* handle the response. For example if a network connection is
* not available.
* @throws AmazonServiceException If an error response is returned by Amazon
* Kinesis Streams indicating either a problem with the data in
* the request, or a server side issue.
*/
void mergeShards(String streamName, String shardToMerge, String adjacentShardToMerge)
throws AmazonClientException, AmazonServiceException;
/**
* <p>
* Splits a shard into two new shards in the Amazon Kinesis stream to
* increase the stream's capacity to ingest and transport data.
* <code>SplitShard</code> is called when there is a need to increase the
* overall capacity of a stream because of an expected increase in the
* volume of data records being ingested.
* </p>
* <p>
* You can also use <code>SplitShard</code> when a shard appears to be
* approaching its maximum utilization; for example, the producers sending
* data into the specific shard are suddenly sending more than previously
* anticipated. You can also call <code>SplitShard</code> to increase stream
* capacity, so that more Amazon Kinesis applications can simultaneously
* read data from the stream for real-time processing.
* </p>
* <p>
* You must specify the shard to be split and the new hash key, which is the
* position in the shard where the shard gets split in two. In many cases,
* the new hash key might simply be the average of the beginning and ending
* hash key, but it can be any hash key value in the range being mapped into
* the shard. For more information about splitting shards, see <a href=
* "http://docs.aws.amazon.com/kinesis/latest/dev/kinesis-using-sdk-java-resharding-split.html"
* >Split a Shard</a> in the <i>Amazon Kinesis Streams Developer Guide</i>.
* </p>
* <p>
* You can use <a>DescribeStream</a> to determine the shard ID and hash key
* values for the <code>ShardToSplit</code> and
* <code>NewStartingHashKey</code> parameters that are specified in the
* <code>SplitShard</code> request.
* </p>
* <p>
* <code>SplitShard</code> is an asynchronous operation. Upon receiving a
* <code>SplitShard</code> request, Amazon Kinesis immediately returns a
* response and sets the stream status to <code>UPDATING</code>. After the
* operation is completed, Amazon Kinesis sets the stream status to
* <code>ACTIVE</code>. Read and write operations continue to work while the
* stream is in the <code>UPDATING</code> state.
* </p>
* <p>
* You can use <code>DescribeStream</code> to check the status of the
* stream, which is returned in <code>StreamStatus</code>. If the stream is
* in the <code>ACTIVE</code> state, you can call <code>SplitShard</code>.
* If a stream is in <code>CREATING</code> or <code>UPDATING</code> or
* <code>DELETING</code> states, <code>DescribeStream</code> returns a
* <code>ResourceInUseException</code>.
* </p>
* <p>
* If the specified stream does not exist, <code>DescribeStream</code>
* returns a <code>ResourceNotFoundException</code>. If you try to create
* more shards than are authorized for your account, you receive a
* <code>LimitExceededException</code>.
* </p>
* <p>
* For the default shard limit for an AWS account, see <a href=
* "http://docs.aws.amazon.com/kinesis/latest/dev/service-sizes-and-limits.html"
* >Streams Limits</a> in the <i>Amazon Kinesis Streams Developer Guide</i>.
* If you need to increase this limit, <a href=
* "http://docs.aws.amazon.com/general/latest/gr/aws_service_limits.html"
* >contact AWS Support</a>.
* </p>
* <p>
* If you try to operate on too many streams simultaneously using
* <a>CreateStream</a>, <a>DeleteStream</a>, <a>MergeShards</a>, and/or
* <a>SplitShard</a>, you receive a <code>LimitExceededException</code>.
* </p>
* <p>
* <code>SplitShard</code> has limit of 5 transactions per second per
* account.
* </p>
*
* @param streamName <p>
* The name of the stream for the shard split.
* </p>
* @param shardToSplit <p>
* The shard ID of the shard to split.
* </p>
* @param newStartingHashKey <p>
* A hash key value for the starting hash key of one of the child
* shards created by the split. The hash key range for a given
* shard constitutes a set of ordered contiguous positive
* integers. The value for <code>NewStartingHashKey</code> must
* be in the range of hash keys being mapped into the shard. The
* <code>NewStartingHashKey</code> hash key value and all higher
* hash key values in hash key range are distributed to one of
* the child shards. All the lower hash key values in the range
* are distributed to the other child shard.
* </p>
* @throws ResourceNotFoundException
* @throws ResourceInUseException
* @throws InvalidArgumentException
* @throws LimitExceededException
* @throws AmazonClientException If any internal errors are encountered
* inside the client while attempting to make the request or
* handle the response. For example if a network connection is
* not available.
* @throws AmazonServiceException If an error response is returned by Amazon
* Kinesis Streams indicating either a problem with the data in
* the request, or a server side issue.
*/
void splitShard(String streamName, String shardToSplit, String newStartingHashKey)
throws AmazonClientException, AmazonServiceException;
/**
* <p>
* Writes a single data record into an Amazon Kinesis stream. Call
* <code>PutRecord</code> to send data into the stream for real-time
* ingestion and subsequent processing, one record at a time. Each shard can
* support writes up to 1,000 records per second, up to a maximum data write
* total of 1 MB per second.
* </p>
* <p>
* You must specify the name of the stream that captures, stores, and
* transports the data; a partition key; and the data blob itself.
* </p>
* <p>
* The data blob can be any type of data; for example, a segment from a log
* file, geographic/location data, website clickstream data, and so on.
* </p>
* <p>
* The partition key is used by Amazon Kinesis to distribute data across
* shards. Amazon Kinesis segregates the data records that belong to a
* stream into multiple shards, using the partition key associated with each
* data record to determine which shard a given data record belongs to.
* </p>
* <p>
* Partition keys are Unicode strings, with a maximum length limit of 256
* characters for each key. An MD5 hash function is used to map partition
* keys to 128-bit integer values and to map associated data records to
* shards using the hash key ranges of the shards. You can override hashing
* the partition key to determine the shard by explicitly specifying a hash
* value using the <code>ExplicitHashKey</code> parameter. For more
* information, see <a href=
* "http://docs.aws.amazon.com/kinesis/latest/dev/developing-producers-with-sdk.html#kinesis-using-sdk-java-add-data-to-stream"
* >Adding Data to a Stream</a> in the <i>Amazon Kinesis Streams Developer
* Guide</i>.
* </p>
* <p>
* <code>PutRecord</code> returns the shard ID of where the data record was
* placed and the sequence number that was assigned to the data record.
* </p>
* <p>
* Sequence numbers increase over time and are specific to a shard within a
* stream, not across all shards within a stream. To guarantee strictly
* increasing ordering, write serially to a shard and use the
* <code>SequenceNumberForOrdering</code> parameter. For more information,
* see <a href=
* "http://docs.aws.amazon.com/kinesis/latest/dev/developing-producers-with-sdk.html#kinesis-using-sdk-java-add-data-to-stream"
* >Adding Data to a Stream</a> in the <i>Amazon Kinesis Streams Developer
* Guide</i>.
* </p>
* <p>
* If a <code>PutRecord</code> request cannot be processed because of
* insufficient provisioned throughput on the shard involved in the request,
* <code>PutRecord</code> throws
* <code>ProvisionedThroughputExceededException</code>.
* </p>
* <p>
* Data records are accessible for only 24 hours from the time that they are
* added to a stream.
* </p>
*
* @param streamName <p>
* The name of the stream to put the data record into.
* </p>
* @param data <p>
* The data blob to put into the record, which is base64-encoded
* when the blob is serialized. When the data blob (the payload
* before base64-encoding) is added to the partition key size,
* the total size must not exceed the maximum record size (1 MB).
* </p>
* @param partitionKey <p>
* Determines which shard in the stream the data record is
* assigned to. Partition keys are Unicode strings with a maximum
* length limit of 256 characters for each key. Amazon Kinesis
* uses the partition key as input to a hash function that maps
* the partition key and associated data to a specific shard.
* Specifically, an MD5 hash function is used to map partition
* keys to 128-bit integer values and to map associated data
* records to shards. As a result of this hashing mechanism, all
* data records with the same partition key map to the same shard
* within the stream.
* </p>
* @return putRecordResult The response from the PutRecord service method,
* as returned by Amazon Kinesis Streams.
* @throws ResourceNotFoundException
* @throws InvalidArgumentException
* @throws ProvisionedThroughputExceededException
* @throws AmazonClientException If any internal errors are encountered
* inside the client while attempting to make the request or
* handle the response. For example if a network connection is
* not available.
* @throws AmazonServiceException If an error response is returned by Amazon
* Kinesis Streams indicating either a problem with the data in
* the request, or a server side issue.
*/
PutRecordResult putRecord(String streamName, java.nio.ByteBuffer data, String partitionKey)
throws AmazonClientException, AmazonServiceException;
/**
* <p>
* Writes a single data record into an Amazon Kinesis stream. Call
* <code>PutRecord</code> to send data into the stream for real-time
* ingestion and subsequent processing, one record at a time. Each shard can
* support writes up to 1,000 records per second, up to a maximum data write
* total of 1 MB per second.
* </p>
* <p>
* You must specify the name of the stream that captures, stores, and
* transports the data; a partition key; and the data blob itself.
* </p>
* <p>
* The data blob can be any type of data; for example, a segment from a log
* file, geographic/location data, website clickstream data, and so on.
* </p>
* <p>
* The partition key is used by Amazon Kinesis to distribute data across
* shards. Amazon Kinesis segregates the data records that belong to a
* stream into multiple shards, using the partition key associated with each
* data record to determine which shard a given data record belongs to.
* </p>
* <p>
* Partition keys are Unicode strings, with a maximum length limit of 256
* characters for each key. An MD5 hash function is used to map partition
* keys to 128-bit integer values and to map associated data records to
* shards using the hash key ranges of the shards. You can override hashing
* the partition key to determine the shard by explicitly specifying a hash
* value using the <code>ExplicitHashKey</code> parameter. For more
* information, see <a href=
* "http://docs.aws.amazon.com/kinesis/latest/dev/developing-producers-with-sdk.html#kinesis-using-sdk-java-add-data-to-stream"
* >Adding Data to a Stream</a> in the <i>Amazon Kinesis Streams Developer
* Guide</i>.
* </p>
* <p>
* <code>PutRecord</code> returns the shard ID of where the data record was
* placed and the sequence number that was assigned to the data record.
* </p>
* <p>
* Sequence numbers increase over time and are specific to a shard within a
* stream, not across all shards within a stream. To guarantee strictly
* increasing ordering, write serially to a shard and use the
* <code>SequenceNumberForOrdering</code> parameter. For more information,
* see <a href=
* "http://docs.aws.amazon.com/kinesis/latest/dev/developing-producers-with-sdk.html#kinesis-using-sdk-java-add-data-to-stream"
* >Adding Data to a Stream</a> in the <i>Amazon Kinesis Streams Developer
* Guide</i>.
* </p>
* <p>
* If a <code>PutRecord</code> request cannot be processed because of
* insufficient provisioned throughput on the shard involved in the request,
* <code>PutRecord</code> throws
* <code>ProvisionedThroughputExceededException</code>.
* </p>
* <p>
* Data records are accessible for only 24 hours from the time that they are
* added to a stream.
* </p>
*
* @param streamName <p>
* The name of the stream to put the data record into.
* </p>
* @param data <p>
* The data blob to put into the record, which is base64-encoded
* when the blob is serialized. When the data blob (the payload
* before base64-encoding) is added to the partition key size,
* the total size must not exceed the maximum record size (1 MB).
* </p>
* @param partitionKey <p>
* Determines which shard in the stream the data record is
* assigned to. Partition keys are Unicode strings with a maximum
* length limit of 256 characters for each key. Amazon Kinesis
* uses the partition key as input to a hash function that maps
* the partition key and associated data to a specific shard.
* Specifically, an MD5 hash function is used to map partition
* keys to 128-bit integer values and to map associated data
* records to shards. As a result of this hashing mechanism, all
* data records with the same partition key map to the same shard
* within the stream.
* </p>
* @param sequenceNumberForOrdering <p>
* Guarantees strictly increasing sequence numbers, for puts from
* the same client and to the same partition key. Usage: set the
* <code>SequenceNumberForOrdering</code> of record <i>n</i> to
* the sequence number of record <i>n-1</i> (as returned in the
* result when putting record <i>n-1</i>). If this parameter is
* not set, records will be coarsely ordered based on arrival
* time.
* </p>
* @return putRecordResult The response from the PutRecord service method,
* as returned by Amazon Kinesis Streams.
* @throws ResourceNotFoundException
* @throws InvalidArgumentException
* @throws ProvisionedThroughputExceededException
* @throws AmazonClientException If any internal errors are encountered
* inside the client while attempting to make the request or
* handle the response. For example if a network connection is
* not available.
* @throws AmazonServiceException If an error response is returned by Amazon
* Kinesis Streams indicating either a problem with the data in
* the request, or a server side issue.
*/
PutRecordResult putRecord(String streamName, java.nio.ByteBuffer data, String partitionKey,
String sequenceNumberForOrdering) throws AmazonClientException, AmazonServiceException;
/**
* <p>
* Gets an Amazon Kinesis shard iterator. A shard iterator expires five
* minutes after it is returned to the requester.
* </p>
* <p>
* A shard iterator specifies the shard position from which to start reading
* data records sequentially. The position is specified using the sequence
* number of a data record in a shard. A sequence number is the identifier
* associated with every record ingested in the stream, and is assigned when
* a record is put into the stream. Each stream has one or more shards.
* </p>
* <p>
* You must specify the shard iterator type. For example, you can set the
* <code>ShardIteratorType</code> parameter to read exactly from the
* position denoted by a specific sequence number by using the
* <code>AT_SEQUENCE_NUMBER</code> shard iterator type, or right after the
* sequence number by using the <code>AFTER_SEQUENCE_NUMBER</code> shard
* iterator type, using sequence numbers returned by earlier calls to
* <a>PutRecord</a>, <a>PutRecords</a>, <a>GetRecords</a>, or
* <a>DescribeStream</a>. In the request, you can specify the shard iterator
* type <code>AT_TIMESTAMP</code> to read records from an arbitrary point in
* time, <code>TRIM_HORIZON</code> to cause <code>ShardIterator</code> to
* point to the last untrimmed record in the shard in the system (the oldest
* data record in the shard), or <code>LATEST</code> so that you always read
* the most recent data in the shard.
* </p>
* <p>
* When you read repeatedly from a stream, use a <a>GetShardIterator</a>
* request to get the first shard iterator for use in your first
* <a>GetRecords</a> request and for subsequent reads use the shard iterator
* returned by the <a>GetRecords</a> request in
* <code>NextShardIterator</code>. A new shard iterator is returned by every
* <a>GetRecords</a> request in <code>NextShardIterator</code>, which you
* use in the <code>ShardIterator</code> parameter of the next
* <a>GetRecords</a> request.
* </p>
* <p>
* If a <a>GetShardIterator</a> request is made too often, you receive a
* <code>ProvisionedThroughputExceededException</code>. For more information
* about throughput limits, see <a>GetRecords</a>, and <a href=
* "http://docs.aws.amazon.com/kinesis/latest/dev/service-sizes-and-limits.html"
* >Streams Limits</a> in the <i>Amazon Kinesis Streams Developer Guide</i>.
* </p>
* <p>
* If the shard is closed, <a>GetShardIterator</a> returns a valid iterator
* for the last sequence number of the shard. Note that a shard can be
* closed as a result of using <a>SplitShard</a> or <a>MergeShards</a>.
* </p>
* <p>
* <a>GetShardIterator</a> has a limit of 5 transactions per second per
* account per open shard.
* </p>
*
* @param streamName <p>
* The name of the Amazon Kinesis stream.
* </p>
* @param shardId <p>
* The shard ID of the Amazon Kinesis shard to get the iterator
* for.
* </p>
* @param shardIteratorType <p>
* Determines how the shard iterator is used to start reading
* data records from the shard.
* </p>
* <p>
* The following are the valid Amazon Kinesis shard iterator
* types:
* </p>
* <ul>
* <li>AT_SEQUENCE_NUMBER - Start reading from the position
* denoted by a specific sequence number, provided in the value
* <code>StartingSequenceNumber</code>.</li>
* <li>AFTER_SEQUENCE_NUMBER - Start reading right after the
* position denoted by a specific sequence number, provided in
* the value <code>StartingSequenceNumber</code>.</li>
* <li>AT_TIMESTAMP - Start reading from the position denoted by
* a specific timestamp, provided in the value
* <code>Timestamp</code>.</li>
* <li>TRIM_HORIZON - Start reading at the last untrimmed record
* in the shard in the system, which is the oldest data record in
* the shard.</li>
* <li>LATEST - Start reading just after the most recent record
* in the shard, so that you always read the most recent data in
* the shard.</li>
* </ul>
* @return getShardIteratorResult The response from the GetShardIterator
* service method, as returned by Amazon Kinesis Streams.
* @throws ResourceNotFoundException
* @throws InvalidArgumentException
* @throws ProvisionedThroughputExceededException
* @throws AmazonClientException If any internal errors are encountered
* inside the client while attempting to make the request or
* handle the response. For example if a network connection is
* not available.
* @throws AmazonServiceException If an error response is returned by Amazon
* Kinesis Streams indicating either a problem with the data in
* the request, or a server side issue.
*/
GetShardIteratorResult getShardIterator(String streamName, String shardId,
String shardIteratorType) throws AmazonClientException, AmazonServiceException;
/**
* <p>
* Gets an Amazon Kinesis shard iterator. A shard iterator expires five
* minutes after it is returned to the requester.
* </p>
* <p>
* A shard iterator specifies the shard position from which to start reading
* data records sequentially. The position is specified using the sequence
* number of a data record in a shard. A sequence number is the identifier
* associated with every record ingested in the stream, and is assigned when
* a record is put into the stream. Each stream has one or more shards.
* </p>
* <p>
* You must specify the shard iterator type. For example, you can set the
* <code>ShardIteratorType</code> parameter to read exactly from the
* position denoted by a specific sequence number by using the
* <code>AT_SEQUENCE_NUMBER</code> shard iterator type, or right after the
* sequence number by using the <code>AFTER_SEQUENCE_NUMBER</code> shard
* iterator type, using sequence numbers returned by earlier calls to
* <a>PutRecord</a>, <a>PutRecords</a>, <a>GetRecords</a>, or
* <a>DescribeStream</a>. In the request, you can specify the shard iterator
* type <code>AT_TIMESTAMP</code> to read records from an arbitrary point in
* time, <code>TRIM_HORIZON</code> to cause <code>ShardIterator</code> to
* point to the last untrimmed record in the shard in the system (the oldest
* data record in the shard), or <code>LATEST</code> so that you always read
* the most recent data in the shard.
* </p>
* <p>
* When you read repeatedly from a stream, use a <a>GetShardIterator</a>
* request to get the first shard iterator for use in your first
* <a>GetRecords</a> request and for subsequent reads use the shard iterator
* returned by the <a>GetRecords</a> request in
* <code>NextShardIterator</code>. A new shard iterator is returned by every
* <a>GetRecords</a> request in <code>NextShardIterator</code>, which you
* use in the <code>ShardIterator</code> parameter of the next
* <a>GetRecords</a> request.
* </p>
* <p>
* If a <a>GetShardIterator</a> request is made too often, you receive a
* <code>ProvisionedThroughputExceededException</code>. For more information
* about throughput limits, see <a>GetRecords</a>, and <a href=
* "http://docs.aws.amazon.com/kinesis/latest/dev/service-sizes-and-limits.html"
* >Streams Limits</a> in the <i>Amazon Kinesis Streams Developer Guide</i>.
* </p>
* <p>
* If the shard is closed, <a>GetShardIterator</a> returns a valid iterator
* for the last sequence number of the shard. Note that a shard can be
* closed as a result of using <a>SplitShard</a> or <a>MergeShards</a>.
* </p>
* <p>
* <a>GetShardIterator</a> has a limit of 5 transactions per second per
* account per open shard.
* </p>
*
* @param streamName <p>
* The name of the Amazon Kinesis stream.
* </p>
* @param shardId <p>
* The shard ID of the Amazon Kinesis shard to get the iterator
* for.
* </p>
* @param shardIteratorType <p>
* Determines how the shard iterator is used to start reading
* data records from the shard.
* </p>
* <p>
* The following are the valid Amazon Kinesis shard iterator
* types:
* </p>
* <ul>
* <li>AT_SEQUENCE_NUMBER - Start reading from the position
* denoted by a specific sequence number, provided in the value
* <code>StartingSequenceNumber</code>.</li>
* <li>AFTER_SEQUENCE_NUMBER - Start reading right after the
* position denoted by a specific sequence number, provided in
* the value <code>StartingSequenceNumber</code>.</li>
* <li>AT_TIMESTAMP - Start reading from the position denoted by
* a specific timestamp, provided in the value
* <code>Timestamp</code>.</li>
* <li>TRIM_HORIZON - Start reading at the last untrimmed record
* in the shard in the system, which is the oldest data record in
* the shard.</li>
* <li>LATEST - Start reading just after the most recent record
* in the shard, so that you always read the most recent data in
* the shard.</li>
* </ul>
* @param startingSequenceNumber <p>
* The sequence number of the data record in the shard from which
* to start reading. Used with shard iterator type
* AT_SEQUENCE_NUMBER and AFTER_SEQUENCE_NUMBER.
* </p>
* @return getShardIteratorResult The response from the GetShardIterator
* service method, as returned by Amazon Kinesis Streams.
* @throws ResourceNotFoundException
* @throws InvalidArgumentException
* @throws ProvisionedThroughputExceededException
* @throws AmazonClientException If any internal errors are encountered
* inside the client while attempting to make the request or
* handle the response. For example if a network connection is
* not available.
* @throws AmazonServiceException If an error response is returned by Amazon
* Kinesis Streams indicating either a problem with the data in
* the request, or a server side issue.
*/
GetShardIteratorResult getShardIterator(String streamName, String shardId,
String shardIteratorType, String startingSequenceNumber) throws AmazonClientException,
AmazonServiceException;
/**
* Shuts down this client object, releasing any resources that might be held
* open. This is an optional method, and callers are not expected to call
* it, but can if they want to explicitly release any open resources. Once a
* client has been shutdown, it should not be used to make any more
* requests.
*/
public void shutdown();
/**
* Returns additional metadata for a previously executed successful request,
* typically used for debugging issues where a service isn't acting as
* expected. This data isn't considered part of the result data returned by
* an operation, so it's available through this separate, diagnostic
* interface.
* <p>
* Response metadata is only cached for a limited period of time, so if you
* need to access this extra diagnostic information for an executed request,
* you should use this method to retrieve it as soon as possible after
* executing a request.
*
* @param request The originally executed request.
* @return The response metadata for the specified request, or null if none
* is available.
*/
public ResponseMetadata getCachedResponseMetadata(AmazonWebServiceRequest request);
}