/*
* SeekableXZInputStream
*
* Author: Lasse Collin <lasse.collin@tukaani.org>
*
* This file has been put into the public domain.
* You can do whatever you want with this file.
*/
package org.tukaani.xz;
import java.util.Arrays;
import java.util.ArrayList;
import java.io.DataInputStream;
import java.io.IOException;
import java.io.EOFException;
import org.tukaani.xz.common.DecoderUtil;
import org.tukaani.xz.common.StreamFlags;
import org.tukaani.xz.check.Check;
import org.tukaani.xz.index.IndexDecoder;
import org.tukaani.xz.index.BlockInfo;
/**
* Decompresses a .xz file in random access mode.
* This supports decompressing concatenated .xz files.
* <p>
* Each .xz file consist of one or more Streams. Each Stream consist of zero
* or more Blocks. Each Stream contains an Index of Streams' Blocks.
* The Indexes from all Streams are loaded in RAM by a constructor of this
* class. A typical .xz file has only one Stream, and parsing its Index will
* need only three or four seeks.
* <p>
* To make random access possible, the data in a .xz file must be splitted
* into multiple Blocks of reasonable size. Decompression can only start at
* a Block boundary. When seeking to an uncompressed position that is not at
* a Block boundary, decompression starts at the beginning of the Block and
* throws away data until the target position is reached. Thus, smaller Blocks
* mean faster seeks to arbitrary uncompressed positions. On the other hand,
* smaller Blocks mean worse compression. So one has to make a compromise
* between random access speed and compression ratio.
* <p>
* Implementation note: This class uses linear search to locate the correct
* Stream from the data structures in RAM. It was the simplest to implement
* and should be fine as long as there aren't too many Streams. The correct
* Block inside a Stream is located using binary search and thus is fast
* even with a huge number of Blocks.
*
* <h4>Memory usage</h4>
* <p>
* The amount of memory needed for the Indexes is taken into account when
* checking the memory usage limit. Each Stream is calculated to need at
* least 1 KiB of memory and each Block 16 bytes of memory, rounded up
* to the next kibibyte. So unless the file has a huge number of Streams or
* Blocks, these don't take significant amount of memory.
*
* <h4>Creating random-accessible .xz files</h4>
* <p>
* When using {@link XZOutputStream}, a new Block can be started by calling
* its {@link XZOutputStream#endBlock() endBlock} method. If you know
* that the decompressor will only need to seek to certain uncompressed
* positions, it can be a good idea to start a new Block at (some of) these
* positions (and only at these positions to get better compression ratio).
* <p>
* liblzma in XZ Utils supports starting a new Block with
* <code>LZMA_FULL_FLUSH</code>. XZ Utils 5.1.1alpha added threaded
* compression which creates multi-Block .xz files. XZ Utils 5.1.1alpha
* also added the option <code>--block-size=SIZE</code> to the xz command
* line tool. XZ Utils 5.1.2alpha added a partial implementation of
* <code>--block-list=SIZES</code> which allows specifying sizes of
* individual Blocks.
*
* @see SeekableFileInputStream
* @see XZInputStream
* @see XZOutputStream
*/
public class SeekableXZInputStream extends SeekableInputStream {
/**
* The input stream containing XZ compressed data.
*/
private SeekableInputStream in;
/**
* Memory usage limit after the memory usage of the IndexDecoders have
* been substracted.
*/
private final int memoryLimit;
/**
* Memory usage of the IndexDecoders.
* <code>memoryLimit + indexMemoryUsage</code> equals the original
* memory usage limit that was passed to the constructor.
*/
private int indexMemoryUsage = 0;
/**
* List of IndexDecoders, one for each Stream in the file.
* The list is in reverse order: The first element is
* the last Stream in the file.
*/
private final ArrayList streams = new ArrayList();
/**
* Bitmask of all Check IDs seen.
*/
private int checkTypes = 0;
/**
* Uncompressed size of the file (all Streams).
*/
private long uncompressedSize = 0;
/**
* Uncompressed size of the largest XZ Block in the file.
*/
private long largestBlockSize = 0;
/**
* Number of XZ Blocks in the file.
*/
private int blockCount = 0;
/**
* Size and position information about the current Block.
* If there are no Blocks, all values will be <code>-1</code>.
*/
private final BlockInfo curBlockInfo;
/**
* Temporary (and cached) information about the Block whose information
* is queried via <code>getBlockPos</code> and related functions.
*/
private final BlockInfo queriedBlockInfo;
/**
* Integrity Check in the current XZ Stream. The constructor leaves
* this to point to the Check of the first Stream.
*/
private Check check;
/**
* Decoder of the current XZ Block, if any.
*/
private BlockInputStream blockDecoder = null;
/**
* Current uncompressed position.
*/
private long curPos = 0;
/**
* Target position for seeking.
*/
private long seekPos;
/**
* True when <code>seek(long)</code> has been called but the actual
* seeking hasn't been done yet.
*/
private boolean seekNeeded = false;
/**
* True when end of the file was reached. This can be cleared by
* calling <code>seek(long)</code>.
*/
private boolean endReached = false;
/**
* Pending exception from an earlier error.
*/
private IOException exception = null;
/**
* Temporary buffer for read(). This avoids reallocating memory
* on every read() call.
*/
private final byte[] tempBuf = new byte[1];
/**
* Creates a new seekable XZ decompressor without a memory usage limit.
*
* @param in seekable input stream containing one or more
* XZ Streams; the whole input stream is used
*
* @throws XZFormatException
* input is not in the XZ format
*
* @throws CorruptedInputException
* XZ data is corrupt or truncated
*
* @throws UnsupportedOptionsException
* XZ headers seem valid but they specify
* options not supported by this implementation
*
* @throws EOFException
* less than 6 bytes of input was available
* from <code>in</code>, or (unlikely) the size
* of the underlying stream got smaller while
* this was reading from it
*
* @throws IOException may be thrown by <code>in</code>
*/
public SeekableXZInputStream(SeekableInputStream in)
throws IOException {
this(in, -1);
}
/**
* Creates a new seekable XZ decomporessor with an optional
* memory usage limit.
*
* @param in seekable input stream containing one or more
* XZ Streams; the whole input stream is used
*
* @param memoryLimit memory usage limit in kibibytes (KiB)
* or <code>-1</code> to impose no
* memory usage limit
*
* @throws XZFormatException
* input is not in the XZ format
*
* @throws CorruptedInputException
* XZ data is corrupt or truncated
*
* @throws UnsupportedOptionsException
* XZ headers seem valid but they specify
* options not supported by this implementation
*
* @throws MemoryLimitException
* decoded XZ Indexes would need more memory
* than allowed by the memory usage limit
*
* @throws EOFException
* less than 6 bytes of input was available
* from <code>in</code>, or (unlikely) the size
* of the underlying stream got smaller while
* this was reading from it
*
* @throws IOException may be thrown by <code>in</code>
*/
public SeekableXZInputStream(SeekableInputStream in, int memoryLimit)
throws IOException {
this.in = in;
DataInputStream inData = new DataInputStream(in);
// Check the magic bytes in the beginning of the file.
{
in.seek(0);
byte[] buf = new byte[XZ.HEADER_MAGIC.length];
inData.readFully(buf);
if (!Arrays.equals(buf, XZ.HEADER_MAGIC))
throw new XZFormatException();
}
// Get the file size and verify that it is a multiple of 4 bytes.
long pos = in.length();
if ((pos & 3) != 0)
throw new CorruptedInputException(
"XZ file size is not a multiple of 4 bytes");
// Parse the headers starting from the end of the file.
byte[] buf = new byte[DecoderUtil.STREAM_HEADER_SIZE];
long streamPadding = 0;
while (pos > 0) {
if (pos < DecoderUtil.STREAM_HEADER_SIZE)
throw new CorruptedInputException();
// Read the potential Stream Footer.
in.seek(pos - DecoderUtil.STREAM_HEADER_SIZE);
inData.readFully(buf);
// Skip Stream Padding four bytes at a time.
// Skipping more at once would be faster,
// but usually there isn't much Stream Padding.
if (buf[8] == 0x00 && buf[9] == 0x00 && buf[10] == 0x00
&& buf[11] == 0x00) {
streamPadding += 4;
pos -= 4;
continue;
}
// It's not Stream Padding. Update pos.
pos -= DecoderUtil.STREAM_HEADER_SIZE;
// Decode the Stream Footer and check if Backward Size
// looks reasonable.
StreamFlags streamFooter = DecoderUtil.decodeStreamFooter(buf);
if (streamFooter.backwardSize >= pos)
throw new CorruptedInputException(
"Backward Size in XZ Stream Footer is too big");
// Check that the Check ID is supported. Store it in case this
// is the first Stream in the file.
check = Check.getInstance(streamFooter.checkType);
// Remember which Check IDs have been seen.
checkTypes |= 1 << streamFooter.checkType;
// Seek to the beginning of the Index.
in.seek(pos - streamFooter.backwardSize);
// Decode the Index field.
IndexDecoder index;
try {
index = new IndexDecoder(in, streamFooter, streamPadding,
memoryLimit);
} catch (MemoryLimitException e) {
// IndexDecoder doesn't know how much memory we had
// already needed so we need to recreate the exception.
assert memoryLimit >= 0;
throw new MemoryLimitException(
e.getMemoryNeeded() + indexMemoryUsage,
memoryLimit + indexMemoryUsage);
}
// Update the memory usage and limit counters.
indexMemoryUsage += index.getMemoryUsage();
if (memoryLimit >= 0) {
memoryLimit -= index.getMemoryUsage();
assert memoryLimit >= 0;
}
// Remember the uncompressed size of the largest Block.
if (largestBlockSize < index.getLargestBlockSize())
largestBlockSize = index.getLargestBlockSize();
// Calculate the offset to the beginning of this XZ Stream and
// check that it looks sane.
long off = index.getStreamSize() - DecoderUtil.STREAM_HEADER_SIZE;
if (pos < off)
throw new CorruptedInputException("XZ Index indicates "
+ "too big compressed size for the XZ Stream");
// Seek to the beginning of this Stream.
pos -= off;
in.seek(pos);
// Decode the Stream Header.
inData.readFully(buf);
StreamFlags streamHeader = DecoderUtil.decodeStreamHeader(buf);
// Verify that the Stream Header matches the Stream Footer.
if (!DecoderUtil.areStreamFlagsEqual(streamHeader, streamFooter))
throw new CorruptedInputException(
"XZ Stream Footer does not match Stream Header");
// Update the total uncompressed size of the file and check that
// it doesn't overflow.
uncompressedSize += index.getUncompressedSize();
if (uncompressedSize < 0)
throw new UnsupportedOptionsException("XZ file is too big");
// Update the Block count and check that it fits into an int.
blockCount += index.getRecordCount();
if (blockCount < 0)
throw new UnsupportedOptionsException(
"XZ file has over " + Integer.MAX_VALUE + " Blocks");
// Add this Stream to the list of Streams.
streams.add(index);
// Reset to be ready to parse the next Stream.
streamPadding = 0;
}
assert pos == 0;
// Save it now that indexMemoryUsage has been substracted from it.
this.memoryLimit = memoryLimit;
// Store the relative offsets of the Streams. This way we don't
// need to recalculate them in this class when seeking; the
// IndexDecoder instances will handle them.
IndexDecoder prev = (IndexDecoder)streams.get(streams.size() - 1);
for (int i = streams.size() - 2; i >= 0; --i) {
IndexDecoder cur = (IndexDecoder)streams.get(i);
cur.setOffsets(prev);
prev = cur;
}
// Initialize curBlockInfo to point to the first Stream.
// The blockNumber will be left to -1 so that .hasNext()
// and .setNext() work to get the first Block when starting
// to decompress from the beginning of the file.
IndexDecoder first = (IndexDecoder)streams.get(streams.size() - 1);
curBlockInfo = new BlockInfo(first);
// queriedBlockInfo needs to be allocated too. The Stream used for
// initialization doesn't matter though.
queriedBlockInfo = new BlockInfo(first);
}
/**
* Gets the types of integrity checks used in the .xz file.
* Multiple checks are possible only if there are multiple
* concatenated XZ Streams.
* <p>
* The returned value has a bit set for every check type that is present.
* For example, if CRC64 and SHA-256 were used, the return value is
* <code>(1 << XZ.CHECK_CRC64)
* | (1 << XZ.CHECK_SHA256)</code>.
*/
public int getCheckTypes() {
return checkTypes;
}
/**
* Gets the amount of memory in kibibytes (KiB) used by
* the data structures needed to locate the XZ Blocks.
* This is usually useless information but since it is calculated
* for memory usage limit anyway, it is nice to make it available to too.
*/
public int getIndexMemoryUsage() {
return indexMemoryUsage;
}
/**
* Gets the uncompressed size of the largest XZ Block in bytes.
* This can be useful if you want to check that the file doesn't
* have huge XZ Blocks which could make seeking to arbitrary offsets
* very slow. Note that huge Blocks don't automatically mean that
* seeking would be slow, for example, seeking to the beginning of
* any Block is always fast.
*/
public long getLargestBlockSize() {
return largestBlockSize;
}
/**
* Gets the number of Streams in the .xz file.
*
* @since 1.3
*/
public int getStreamCount() {
return streams.size();
}
/**
* Gets the number of Blocks in the .xz file.
*
* @since 1.3
*/
public int getBlockCount() {
return blockCount;
}
/**
* Gets the uncompressed start position of the given Block.
*
* @throws IndexOutOfBoundsException if
* <code>blockNumber < 0</code> or
* <code>blockNumber >= getBlockCount()</code>.
*
* @since 1.3
*/
public long getBlockPos(int blockNumber) {
locateBlockByNumber(queriedBlockInfo, blockNumber);
return queriedBlockInfo.uncompressedOffset;
}
/**
* Gets the uncompressed size of the given Block.
*
* @throws IndexOutOfBoundsException if
* <code>blockNumber < 0</code> or
* <code>blockNumber >= getBlockCount()</code>.
*
* @since 1.3
*/
public long getBlockSize(int blockNumber) {
locateBlockByNumber(queriedBlockInfo, blockNumber);
return queriedBlockInfo.uncompressedSize;
}
/**
* Gets the position where the given compressed Block starts in
* the underlying .xz file.
* This information is rarely useful to the users of this class.
*
* @throws IndexOutOfBoundsException if
* <code>blockNumber < 0</code> or
* <code>blockNumber >= getBlockCount()</code>.
*
* @since 1.3
*/
public long getBlockCompPos(int blockNumber) {
locateBlockByNumber(queriedBlockInfo, blockNumber);
return queriedBlockInfo.compressedOffset;
}
/**
* Gets the compressed size of the given Block.
* This together with the uncompressed size can be used to calculate
* the compression ratio of the specific Block.
*
* @throws IndexOutOfBoundsException if
* <code>blockNumber < 0</code> or
* <code>blockNumber >= getBlockCount()</code>.
*
* @since 1.3
*/
public long getBlockCompSize(int blockNumber) {
locateBlockByNumber(queriedBlockInfo, blockNumber);
return (queriedBlockInfo.unpaddedSize + 3) & ~3;
}
/**
* Gets integrity check type (Check ID) of the given Block.
*
* @throws IndexOutOfBoundsException if
* <code>blockNumber < 0</code> or
* <code>blockNumber >= getBlockCount()</code>.
*
* @see #getCheckTypes()
*
* @since 1.3
*/
public int getBlockCheckType(int blockNumber) {
locateBlockByNumber(queriedBlockInfo, blockNumber);
return queriedBlockInfo.getCheckType();
}
/**
* Gets the number of the Block that contains the byte at the given
* uncompressed position.
*
* @throws IndexOutOfBoundsException if
* <code>pos < 0</code> or
* <code>pos >= length()</code>.
*
* @since 1.3
*/
public int getBlockNumber(long pos) {
locateBlockByPos(queriedBlockInfo, pos);
return queriedBlockInfo.blockNumber;
}
/**
* Decompresses the next byte from this input stream.
*
* @return the next decompressed byte, or <code>-1</code>
* to indicate the end of the compressed stream
*
* @throws CorruptedInputException
* @throws UnsupportedOptionsException
* @throws MemoryLimitException
*
* @throws XZIOException if the stream has been closed
*
* @throws IOException may be thrown by <code>in</code>
*/
public int read() throws IOException {
return read(tempBuf, 0, 1) == -1 ? -1 : (tempBuf[0] & 0xFF);
}
/**
* Decompresses into an array of bytes.
* <p>
* If <code>len</code> is zero, no bytes are read and <code>0</code>
* is returned. Otherwise this will try to decompress <code>len</code>
* bytes of uncompressed data. Less than <code>len</code> bytes may
* be read only in the following situations:
* <ul>
* <li>The end of the compressed data was reached successfully.</li>
* <li>An error is detected after at least one but less than
* <code>len</code> bytes have already been successfully
* decompressed. The next call with non-zero <code>len</code>
* will immediately throw the pending exception.</li>
* <li>An exception is thrown.</li>
* </ul>
*
* @param buf target buffer for uncompressed data
* @param off start offset in <code>buf</code>
* @param len maximum number of uncompressed bytes to read
*
* @return number of bytes read, or <code>-1</code> to indicate
* the end of the compressed stream
*
* @throws CorruptedInputException
* @throws UnsupportedOptionsException
* @throws MemoryLimitException
*
* @throws XZIOException if the stream has been closed
*
* @throws IOException may be thrown by <code>in</code>
*/
public int read(byte[] buf, int off, int len) throws IOException {
if (off < 0 || len < 0 || off + len < 0 || off + len > buf.length)
throw new IndexOutOfBoundsException();
if (len == 0)
return 0;
if (in == null)
throw new XZIOException("Stream closed");
if (exception != null)
throw exception;
int size = 0;
try {
if (seekNeeded)
seek();
if (endReached)
return -1;
while (len > 0) {
if (blockDecoder == null) {
seek();
if (endReached)
break;
}
int ret = blockDecoder.read(buf, off, len);
if (ret > 0) {
curPos += ret;
size += ret;
off += ret;
len -= ret;
} else if (ret == -1) {
blockDecoder = null;
}
}
} catch (IOException e) {
// We know that the file isn't simply truncated because we could
// parse the Indexes in the constructor. So convert EOFException
// to CorruptedInputException.
if (e instanceof EOFException)
e = new CorruptedInputException();
exception = e;
if (size == 0)
throw e;
}
return size;
}
/**
* Returns the number of uncompressed bytes that can be read
* without blocking. The value is returned with an assumption
* that the compressed input data will be valid. If the compressed
* data is corrupt, <code>CorruptedInputException</code> may get
* thrown before the number of bytes claimed to be available have
* been read from this input stream.
*
* @return the number of uncompressed bytes that can be read
* without blocking
*/
public int available() throws IOException {
if (in == null)
throw new XZIOException("Stream closed");
if (exception != null)
throw exception;
if (endReached || seekNeeded || blockDecoder == null)
return 0;
return blockDecoder.available();
}
/**
* Closes the stream and calls <code>in.close()</code>.
* If the stream was already closed, this does nothing.
*
* @throws IOException if thrown by <code>in.close()</code>
*/
public void close() throws IOException {
if (in != null) {
try {
in.close();
} finally {
in = null;
}
}
}
/**
* Gets the uncompressed size of this input stream. If there are multiple
* XZ Streams, the total uncompressed size of all XZ Streams is returned.
*/
public long length() {
return uncompressedSize;
}
/**
* Gets the current uncompressed position in this input stream.
*
* @throws XZIOException if the stream has been closed
*/
public long position() throws IOException {
if (in == null)
throw new XZIOException("Stream closed");
return seekNeeded ? seekPos : curPos;
}
/**
* Seeks to the specified absolute uncompressed position in the stream.
* This only stores the new position, so this function itself is always
* very fast. The actual seek is done when <code>read</code> is called
* to read at least one byte.
* <p>
* Seeking past the end of the stream is possible. In that case
* <code>read</code> will return <code>-1</code> to indicate
* the end of the stream.
*
* @param pos new uncompressed read position
*
* @throws XZIOException
* if <code>pos</code> is negative, or
* if stream has been closed
*/
public void seek(long pos) throws IOException {
if (in == null)
throw new XZIOException("Stream closed");
if (pos < 0)
throw new XZIOException("Negative seek position: " + pos);
seekPos = pos;
seekNeeded = true;
}
/**
* Seeks to the beginning of the given XZ Block.
*
* @throws XZIOException
* if <code>blockNumber < 0</code> or
* <code>blockNumber >= getBlockCount()</code>,
* or if stream has been closed
*
* @since 1.3
*/
public void seekToBlock(int blockNumber) throws IOException {
if (in == null)
throw new XZIOException("Stream closed");
if (blockNumber < 0 || blockNumber >= blockCount)
throw new XZIOException("Invalid XZ Block number: " + blockNumber);
// This is a bit silly implementation. Here we locate the uncompressed
// offset of the specified Block, then when doing the actual seek in
// seek(), we need to find the Block number based on seekPos.
seekPos = getBlockPos(blockNumber);
seekNeeded = true;
}
/**
* Does the actual seeking. This is also called when <code>read</code>
* needs a new Block to decode.
*/
private void seek() throws IOException {
// If seek(long) wasn't called, we simply need to get the next Block
// from the same Stream. If there are no more Blocks in this Stream,
// then we behave as if seek(long) had been called.
if (!seekNeeded) {
if (curBlockInfo.hasNext()) {
curBlockInfo.setNext();
initBlockDecoder();
return;
}
seekPos = curPos;
}
seekNeeded = false;
// Check if we are seeking to or past the end of the file.
if (seekPos >= uncompressedSize) {
curPos = seekPos;
blockDecoder = null;
endReached = true;
return;
}
endReached = false;
// Locate the Block that contains the uncompressed target position.
locateBlockByPos(curBlockInfo, seekPos);
// Seek in the underlying stream and create a new Block decoder
// only if really needed. We can skip it if the current position
// is already in the correct Block and the target position hasn't
// been decompressed yet.
//
// NOTE: If curPos points to the beginning of this Block, it's
// because it was left there after decompressing an earlier Block.
// In that case, decoding of the current Block hasn't been started
// yet. (Decoding of a Block won't be started until at least one
// byte will also be read from it.)
if (!(curPos > curBlockInfo.uncompressedOffset && curPos <= seekPos)) {
// Seek to the beginning of the Block.
in.seek(curBlockInfo.compressedOffset);
// Since it is possible that this Block is from a different
// Stream than the previous Block, initialize a new Check.
check = Check.getInstance(curBlockInfo.getCheckType());
// Create a new Block decoder.
initBlockDecoder();
curPos = curBlockInfo.uncompressedOffset;
}
// If the target wasn't at a Block boundary, decompress and throw
// away data to reach the target position.
if (seekPos > curPos) {
// NOTE: The "if" below is there just in case. In this situation,
// blockDecoder.skip will always skip the requested amount
// or throw an exception.
long skipAmount = seekPos - curPos;
if (blockDecoder.skip(skipAmount) != skipAmount)
throw new CorruptedInputException();
curPos = seekPos;
}
}
/**
* Locates the Block that contains the given uncompressed position.
*/
private void locateBlockByPos(BlockInfo info, long pos) {
if (pos < 0 || pos >= uncompressedSize)
throw new IndexOutOfBoundsException(
"Invalid uncompressed position: " + pos);
// Locate the Stream that contains the target position.
IndexDecoder index;
for (int i = 0; ; ++i) {
index = (IndexDecoder)streams.get(i);
if (index.hasUncompressedOffset(pos))
break;
}
// Locate the Block from the Stream that contains the target position.
index.locateBlock(info, pos);
assert (info.compressedOffset & 3) == 0;
assert info.uncompressedSize > 0;
assert pos >= info.uncompressedOffset;
assert pos < info.uncompressedOffset + info.uncompressedSize;
}
/**
* Locates the given Block and stores information about it
* to <code>info</code>.
*/
private void locateBlockByNumber(BlockInfo info, int blockNumber) {
// Validate.
if (blockNumber < 0 || blockNumber >= blockCount)
throw new IndexOutOfBoundsException(
"Invalid XZ Block number: " + blockNumber);
// Skip the search if info already points to the correct Block.
if (info.blockNumber == blockNumber)
return;
// Search the Stream that contains the given Block and then
// search the Block from that Stream.
for (int i = 0; ; ++i) {
IndexDecoder index = (IndexDecoder)streams.get(i);
if (index.hasRecord(blockNumber)) {
index.setBlockInfo(info, blockNumber);
return;
}
}
}
/**
* Initializes a new BlockInputStream. This is a helper function for
* <code>seek()</code>.
*/
private void initBlockDecoder() throws IOException {
try {
// Set it to null first so that GC can collect it if memory
// runs tight when initializing a new BlockInputStream.
blockDecoder = null;
blockDecoder = new BlockInputStream(in, check, memoryLimit,
curBlockInfo.unpaddedSize, curBlockInfo.uncompressedSize);
} catch (MemoryLimitException e) {
// BlockInputStream doesn't know how much memory we had
// already needed so we need to recreate the exception.
assert memoryLimit >= 0;
throw new MemoryLimitException(
e.getMemoryNeeded() + indexMemoryUsage,
memoryLimit + indexMemoryUsage);
} catch (IndexIndicatorException e) {
// It cannot be Index so the file must be corrupt.
throw new CorruptedInputException();
}
}
}