/**
* encoding: UTF-8
* This file is part of reSID, a MOS6581 SID emulator engine.
* Copyright (C) 2004 Dag Lem <resid@nimrod.no>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*
* @author Ken Händel
*
*/
package resid;
import resid.ISIDDefs.chip_model;
public class Voice {
protected WaveformGenerator wave = new WaveformGenerator();
protected EnvelopeGenerator envelope = new EnvelopeGenerator();
protected boolean muted;
/**
* Waveform D/A zero level.
*/
protected int /* sound_sample */wave_zero;
/**
* Multiplying D/A DC offset.
*/
protected int /* sound_sample */voice_DC;
// ----------------------------------------------------------------------------
// Inline functions.
// The following functions are defined inline because they are called every
// time a sample is calculated.
// ----------------------------------------------------------------------------
/**
* Amplitude modulated waveform output. Ideal range [-2048*255, 2047*255].
*/
public int /* sound_sample */output() {
if (!muted) { // Multiply oscillator output with envelope output.
return ((wave.output() - wave_zero) * envelope.output() + voice_DC);
} else {
return 0;
}
}
// ----------------------------------------------------------------------------
// END Inline functions.
// ----------------------------------------------------------------------------
/**
* Constructor.
*/
public Voice() {
muted = false;
set_chip_model(chip_model.MOS6581);
}
/**
* Set chip model.
*
* @param model
*/
public void set_chip_model(chip_model model) {
wave.set_chip_model(model);
if (model == chip_model.MOS6581) {
// The waveform D/A converter introduces a DC offset in the signal
// to the envelope multiplying D/A converter. The "zero" level of
// the waveform D/A converter can be found as follows:
//
// Measure the "zero" voltage of voice 3 on the SID audio output
// pin, routing only voice 3 to the mixer ($d417 = $0b, $d418 =
// $0f, all other registers zeroed).
//
// Then set the sustain level for voice 3 to maximum and search for
// the waveform output value yielding the same voltage as found
// above. This is done by trying out different waveform output
// values until the correct value is found, e.g. with the following
// program:
//
// lda #$08
// sta $d412
// lda #$0b
// sta $d417
// lda #$0f
// sta $d418
// lda #$f0
// sta $d414
// lda #$21
// sta $d412
// lda #$01
// sta $d40e
//
// ldx #$00
// lda #$38 ; Tweak this to find the "zero" level
// l cmp $d41b
// bne l
// stx $d40e ; Stop frequency counter - freeze waveform output
// brk
//
// The waveform output range is 0x000 to 0xfff, so the "zero"
// level should ideally have been 0x800. In the measured chip, the
// waveform output "zero" level was found to be 0x380 (i.e. $d41b
// = 0x38) at 5.94V.
wave_zero = 0x380;
// The envelope multiplying D/A converter introduces another DC
// offset. This is isolated by the following measurements:
//
// * The "zero" output level of the mixer at full volume is 5.44V.
// * Routing one voice to the mixer at full volume yields
// 6.75V at maximum voice output (wave = 0xfff, sustain = 0xf)
// 5.94V at "zero" voice output (wave = any, sustain = 0x0)
// 5.70V at minimum voice output (wave = 0x000, sustain = 0xf)
// * The DC offset of one voice is (5.94V - 5.44V) = 0.50V
// * The dynamic range of one voice is |6.75V - 5.70V| = 1.05V
// * The DC offset is thus 0.50V/1.05V ~ 1/2 of the dynamic range.
//
// Note that by removing the DC offset, we get the following ranges
// for
// one voice:
// y > 0: (6.75V - 5.44V) - 0.50V = 0.81V
// y < 0: (5.70V - 5.44V) - 0.50V = -0.24V
// The scaling of the voice amplitude is not symmetric about y = 0;
// this follows from the DC level in the waveform output.
voice_DC = 0x800 * 0xff;
} else {
// No DC offsets in the MOS8580.
wave_zero = 0x800;
voice_DC = 0;
}
}
/**
* Set sync source.
*/
public void set_sync_source(Voice source) {
wave.set_sync_source(source.wave);
}
/**
* Register functions.
*
* @param control
*/
public void writeCONTROL_REG(int /* reg8 */control) {
wave.writeCONTROL_REG(control);
envelope.writeCONTROL_REG(control);
}
/**
* SID reset.
*/
public void reset() {
wave.reset();
envelope.reset();
}
/**
* Voice mute.
*
* @param enable
*/
public void mute(boolean enable) {
// enable = true (means voice is muted)
muted = enable;
}
}